Fluke i2000 Flex AC Current Clamp

  • Fluke I2000 Flex AC Current Clamp | Fluke

คุณลักษณะสำคัญ

  • Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
  • Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
  • Maximum conductor diameter 178 mm
  • CAT III 600 V safety rating
ซื้อเลย

ภาพรวมผลิตภัณฑ์: Fluke i2000 Flex AC Current Clamp

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

ข้อมูลจำเพาะ: Fluke i2000 Flex AC Current Clamp

Electrical specifications
Current ranges 20 A
200 A
2000 A
AC rms
Output sensitivity (AC-coupled) 1 mV
10 mV
100 mV
1 mV per A
Load impedance 100 kΩ minimum
Accuracy at +25°C
±1% of range (45 Hz to 65 Hz)
Linearity 10% to 100% of range
±0.2% of reading
Noise 8 mV AC rms (30 A)
2 mV AC rms (300 A, 3000 A)
Frequency range 10 Hz to 20 kHz (-3 dB)
Phase error < ±1° (45 Hz to 65 Hz)
±10° (at 20 kHz)
Position sensitivity with cable > 25 mm from the coupling
±2% of range
External field with cable > 200 mm from the head
±1% of range
Power supply 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient ±0.08% of reading per °C
Working voltage see Safety standards section
600 V AC rms or DC
General Specifications
Head Circumference 610 mm (24 in)
Head cable diameter 14.3 mm (0.56 in)
Head bend radius 38.1 mm (1.5 in)
Cable length (head to electronics) 2 m (6.56 ft)
Output connection Molded 4 mm safety plugs (not integrated)
Operating temperature range 0°C to +70°C (32°F to 158°F) (head and electronics)
Storage temperature range -40°C to +105°C (-40°F to 221°F) (head)
-20°C to +85°C (-4°F to 185°F) (electronics)
Operating humidity 15% to 85% (non-condensing)
Weight 180 g (6.34 oz) (head)
190 g (6.70 oz) (electronics)
Safety standards EN 61010-031: 2002
EN 61010-2-032: 2002
EN 61010-1: 2001
600 Vrms, Category III, Pollution Degree 2
Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
EMC standards EN 61326: 1998 +A1, A2, and A3
Dimensions (H x W x D) 116 x 68.5 x 30 mm (4.56 x 2.69 x 1.18 in)

รุ่น: Fluke i2000 Flex AC Current Clamp

Fluke i2000 Flex
ซื้อเลย