Fluke i1010 AC/DC Current Clamp
คุณลักษณะสำคัญ
- The Fluke i1010 AC/DC current clamp is a battery-powered Hall-effect probe that extend the current ranges of Fluke tools, measuring DC current from 1 A to 1000 A and AC current from 1 A to 600A.
- Provides accurate current reading without breaking the circuit.
- Compatible with most Fluke multimeters.
- CAT III 600 V safety rating
ภาพรวมผลิตภัณฑ์: Fluke i1010 AC/DC Current Clamp
Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC current clamp is highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters.
ข้อมูลจำเพาะ: Fluke i1010 AC/DC Current Clamp
Specifications | |
Measurement type | Hall sensor |
Nominal current range | 600 A, AC 1000 A, DC |
Continuous current range | 1 A - 600 A, AC 1 A - 1000 A, DC |
Maximum non-desctructive current | 1000 A |
Lowest measureable current | 0.5 A |
Basic accuracy | 2% + 0.5 A (% reading + floorspec) |
Useable frequency | DC - 10 kHz |
Output level(s) | 1 mV/A |
Zero error adjustment | Yes |
Safety Specifications | |
Safety | CAT III, 600 V |
Maximum voltage | 600 V |
Mechanical and General Specifications | |
Warranty | 1 year |
Battery life | 9 V, 60 h |
Maximum conductor diameter | 30 mm 2 x 25 mm |
Output cable length | 1.6 m |
Shrouded banana plugs | Yes |
รุ่น: Fluke i1010 AC/DC Current Clamp
Fluke i1010
Fluke i1010 AC/DC Current Clamp