Search results

Only search for:
Found 106 results containing the words:site
  • Fluke FEV100 Electric Vehicle Charging Station EVSE Test Adapter

    Test safety and performance of level 1 or level 2 electric vehicle ac charging stations.

    Products
  • How Acoustic Imaging Cameras Perform Leak Rate Quantification

    Learn how acoustic imaging cameras detect leaks, leak source factors and properties, leak type classification and leak rate quantification.

    Article
  • Using loop power for process instrument and 4-20 mA loop testing

    Most loop calibrators have a 24V loop power supply for powering and testing process transmitters. This is useful for testing transmitter off line from the circuit they are installed if they need calibration or are suspected of being defective. In this operating mode most loop calibrators provide the 24V loop power and simultaneously measure the 4 to 20 mA signal drawn by the transmitter. To test a transmitter in this mode, turn on loop power and select mA measure. Disconnect the transmitter from...

    Article
  • What is frequency?

    AC frequency is the number of cycles per second in an alternating current (AC) sine wave.

    Article
  • What is current?

    Current is the rate at which electrons flow past a point in a complete electrical circuit.

    Article
  • Diagnosing Power Quality Issues in Older Electrical Systems

    Learn how to diagnose power quality issues in older electrical systems using a Fluke multimeters and oscilloscope.

    Article
  • How to Get Faster 3 Phase Power Measurements with Clamp Meters

    Get 3 phase power measurements 50% faster with Fieldsense clamp meters. How to measure 3 phase voltage and current simultaneously.

    Article
  • Fluke TruTest™ Data Management and Reporting Software

    The easy-to-use data management and reporting solution.

    Products
  • Fluke Solar Irradiance Meter

    Instantaneous irradiance measurements up to 1400 w/m2. Includes temperature, compass and inclination readings.

    Products
  • Multimeter symbols, buttons, dials and display

    table.custom-table { border-collapse: collapse; } table.custom-table td { border: 1px solid #ccc; font-size: 14px; text-align: center; } table.custom-table td.text-left { text-align: left; } @media only screen and (max-width: 768px) { table.custom-table td { font-size: 12px; word-wrap: break-word } } This guide will take you through the basic anatomy of a digital multimeter. The more familiar you become with your own digital multimeter, the more valuable it will become as you are able to maximize...

    Article
  • 5 tips for a successful IIoT program

    By Brian Harrison According to a Fluke 2019 survey, roughly 50 percent of maintenance and reliability professionals were actively planning Industrial Internet of Things (IIoT) initiatives. This survey preceded the challenges brought about by COVID-19. At the time, more than half of the teams interviewed found the IIoT process to be more complicated than anticipated because of an essential prerequisite—collaboration with other teams and departments. Despite the business disruption caused by the...

    Article
  • How to Measure Resistance with a Digital Multimeter

    Resistance is measured using analog or digital multimeters. These tools also measure current, voltage, and more for various applications. Why measure resistance? To determine the condition of a circuit or component. The higher the resistance, the lower the current flow, and vice versa. In general, the resistance of components used to control circuits (such as switches and relay contacts) starts out very low and increases over time due to factors such as wear and dirt. Loads such as motors and solenoids...

    Article
  • How to measure frequency

    Circuits and equipment may be designed to operate at a fixed or variable frequency. They may perform abnormally if operated at a different frequency than specified. For example, an ac motor designed to operate at 60 Hz operates slower if the frequency is less than 60 Hz, or faster if frequency exceeds 60 Hz. For ac motors, any change in frequency causes a proportional change in motor speed. A five percent reduction in frequency yields a five percent reduction in motor speed. Some digital multimeters...

    Article
  • How to measure dc voltage with a digital multimeter

    Turn dial to dc voltage. Some digital multimeters (DMMs) also include dc millivolts. If uncertain of which to choose, start with dc voltage, which handles higher voltage. First insert the black probe into the COM jack. Steps for measuring dc voltage with a digital multimeter Then insert the red probes into the V Ω jack. When finished, remove the probes in reverse order: red first, then black. Connect the test probes to the circuit: black to the negative polarity test point (circuit ground),...

    Article
  • Guide to Clamp Meter Symbols: Diagram, Buttons, Dial, Display

    Guide to clamp meter symbols, buttons, display and dial functions.

    Article
  • How to measure a 4-20mA loop signal

    The 4 mA to 20 mA current loop is a common method of transmitting sensor information in many industrial process monitoring applications—typically in systems monitoring pressure, temperature, pH, flow, or other physical factors. These systems employ a two-wire, 4 mA to 20 mA current loop, in which a single twisted-pair cable supplies power to a transmitter and also carries the output signal. The loop’s operation is straightforward: a sensor’s output voltage is first converted to a proportional...

    Article
  • Why ruggedness matters in a clamp meter

    Fluke engineers its clamp meters to withstand a high degree of unconventional use—as a wedge, makeshift pliers, nutcracker, whatever a tech might dream up in a moment of need.

    Article
  • Clamp meter safety tips

    Safety is always a priority when working with electricity in industrial sites.

    Article
  • What are Hall Effect (ac, dc) clamp meters?

    Hall Effect clamp meters can measure both ac and dc current up to the kilohertz (1000 Hz) range

    Article
  • TiS75+ Thermal Camera

    Features 384 x 288 infrared resolution, touchscreen, video recording, dew-point calculation.

    Products
  • How to measure current with a clamp meter

    Measuring ac current with a clamp meter’s jaws. Note: Current flowing in opposite directions cancels each other. If current is moving in opposite directions, place just one conductor within the clamp during measurement.

    Article
  • How to streamline maintenance, reduce costs, and improve asset performance with Fluke Mobile

    By: Jacek Karpol-Nawrocki and Christian Beham, Professional Service Managers at Fluke Reliability Fluke Mobile is a software application optimized for mobile workers using the IBM Maximo EAM platform. By integrating Fluke Mobile with your Maximo system, you enable maintenance teams to respond to corrective maintenance requests and work orders in a single workflow on a tablet or smartphone. The seamless integration of unplanned and planned maintenance requests on a mobile device helps organizations...

    Article
  • 67 MAX Clinical Infrared Thermometer

    Non-contact clinical IR thermometer for scanning elevated body temperature.

    Products
  • How to clean your Fluke tools

    Reopening the world in the wake of a pandemic brings new health and safety concerns. Much of the emphasis has been on personal hygiene, such as hand washing, social distancing, and face covering. But as industries begin to open, a new normal awaits them where personal hygiene must extend to shared work surfaces. The World Health Organization (WHO) recommends regular cleaning of your frequently touched surfaces. Maintenance technicians, electricians, and others who share tools need to understand and...

    Article
  • What matters in custody transfer

    Custody transfer operations in the oil and gas business requires some of the most precise measurements in all of industry. As part of custody transfer, technicians routinely calibrate all the pressure and temperature transmitters involved in the flow of oil and gas as well as the pressure in the pipelines and related equipment themselves. Fluke offers both handheld and desktop precision pressure calibrators and test gauges accurate and rugged enough for gas and custody applications. Plus, many of...

    Article
  • 3 considerations for medical gas leak detection

    Testing medical gases and piping systems in healthcare facilities and hospitals presents multiple challenges for maintenance teams. Learn why efficient leak detection is critical.

    Article
  • DC injection the new source of trouble

    Grid connected photovoltaic systems are growing in importance as sustainable energy sources. The DC power of the solar panels is converted into an AC power by inverters. These are transformerless and, besides generating AC current, also inject a small DC Current. Excessive DC current injection into an AC network can cause problems like transformer saturation, however, which will cause additional losses and reduce transformer lifetime. For measuring these DC components, we need a Power Quality Analyzer...

    Article
  • Case study: Fluke power monitor saves California wastewater plant thousands of dollars

    Read the wastewater plant case study on how the Fluke 3540 Power Monitor paid for itself in five months by eliminating the need to use contractors.

    Article
  • Fluke 87V Digital Multimeter vs Fluke 87V MAX Multimeter

    Compare IP rating, battery life and other features. What is the difference between the Fluke 87V MAX and the 87V digital multimeter?

    Article
  • Fluke Process Tools Celebrating 25 Years of Innovation and Impact

    EVERETT, Wash., Nov. 27, 2019 – Fluke’s Process Tools division is celebrating 25 years of innovation. This year marks a quarter of a century since the company’s first two handheld Documenting Process Calibrators (DPC) were produced. For 25 years, Fluke has worked hard to meet the ever-changing demands process industry professionals face. In May 1994, Fluke first debuted two handheld DPCs at the ISA Show in Philadelphia. The Fluke 701 and Fluke 702 entered the market, forever changing the calibration...

    Article
  • How Good Data Helps Manage PV and Microgrid Performance

    How to use data to prove the value of PV and microgrids in order to provide a safer, cheaper, more secure and more reliable distributed energy electric power system.

    Article
  • The difference between telephoto, macro and wide angle IR lenses

    Learn how for some use cases, a telephoto, macro or wide angle lens can prove invaluable. Plus, find out why ‘smart lenses' are better than the alternative.

    Article
  • Lockout / tagout for solar power systems

    How to LOTO a PV system. Guidance for electrical safety in solar power plants, PV installation and solar panel safety considerations.

    Article
  • What would it take to add thermal imaging to your business?

    A thermal imaging program is a powerful tool in both preventive maintenance and when troubleshooting critical equipment; both of which can save time and money. Adding thermal imaging inspections is a huge upgrade in your ability to detect and fix issues before unexpected downtime occurs. Thermal imaging in your business Working in maintenance, you already have broad experience with many types of equipment and failure scenarios. Your experience, combined with a thermal camera and some basic training,...

    Article
  • Fluke 87V MAX True-rms Digital Multimeter

    Rugged, dustproof IP67 outer shell for the most extreme work sites. Measure up to 1000 V ac and dc.

    Products
  • The New Fluke 417D Laser Distance Meter takes reliability and measurement time to the next level

    EVERETT, Wash., Sept. 17, 2019 – Fluke introduces its newest, most compact laser distance meter yet—the 417D Laser Distance Meter. The 417D speeds up layouts with instant, one-button measurements up to 131 feet (40 meters) and an accuracy of 0.08 inches (± 2 mm). This ultra-portable meter increases measurement efficiency while maximizing the reliability of measurements by reducing estimation errors, saving time and money. Designed for indoor and outdoor applications, the palm-sized 417D features...

    Article
  • Maximizing Photovoltaic Efficiency: Commissioning a PV System for Optimal Performance

    Solar energy expert guidance on how to design and commission a photovoltaic system for maximum performance including longevity of equipment, safety and ROI.

    Article
  • The art of automation and energy efficiency

    Using Fluke tools for energy efficiency and cost savings. How the Figge Art Museum automated their HVAC control systems, reduced energy consumption and saved on annual energy costs

    Article
  • Fluke 1736 and 1738 Three-Phase Power Quality Loggers

    Versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

    Products
  • PLS RBP5 SINGLE PACK

    Maximize your laser level operating time up to 3x with PLS RBP5 Rechargeable single battery pack. The RBP5 is compatible with our newest point, line and combination laser levels; PLS 3G, 3R, 5G, 5R, 6G, 6R, 180G, 180R. Only comes with battery.

    Products
  • PLS RBP5 Rechargeable Battery Pack

    Maximize your laser level operating time up to 3x and eliminate alkaline battery purchases with the PLS RBP5 Rechargeable Battery Pack. The RBP5 is compatible with our newest point, line and combination laser levels; PLS 3G, 3R, 5G, 5R, 6G, 6R, 180G, 180R

    Products
  • Fluke’s new 1000 volt insulated hand tools integrate safety and all-day comfort for electricians and technicians working in hazardous environments

    Fluke ruggedness, safety, and ergonomics are now available in its new line of 11 premium 1000 volt-rated insulated hand tools EVERETT, Wash., May 28, 2019 – Electricians and facility maintenance technicians should ideally work on de-energized electrical equipment, but that isn’t always possible, so their hand tools should provide as much protection as possible. The new Fluke™ 1000 V Insulated Hand Tools are designed to keep workers safe in hazardous areas and are rugged enough to use in the...

    Article
  • How insulated tools work

    Insulated hand tools provide critical safety protection for electricians and technicians who work with live electrical equipment.

    Article
  • Fluke T6-1000 Electrical Tester wins 2019 Best New Product Award at MCEE

    The competition honors innovative products that increase efficiency and safety of mechanical and electrical installations EVERETT, Wash., May 8, 2019 – The Fluke® T6-1000 Electrical Tester won the 2019 Best New Product Award in the Protective Tools, Hardware, and Equipment category at the Mécanex/Climatex/Expolectriq/Éclairage (MCEE) Show held in Montréal in April. The MCEE New Products Competition recognizes the most innovative products that increase the efficiency and safety of mechanical...

    Article
  • Want to be more proactive? Add route-based vibration to your technician’s toolkit

    .super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; } .super-custom body { margin: 0; } .super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup, .super-custom main, .super-custom menu, .super-custom nav, .super-custom section, .super-custom summary { display: block; } .super-custom audio, .super-custom canvas, .super-custom...

    Article
  • PLS 180G Replacement Window Glass Insert

    PLS laser levels are durable professional-grade tools that are made for construction environments. When dropped from a high enough distance, even the most rugged laser level glass can break. Stay on schedule with PLS replacement window glass inserts.

    Products
  • PLS 3G Replacement Window Glass Insert

    PLS laser levels are durable professional-grade tools that are made for construction environments. When dropped from a high enough distance, even the most rugged laser level glass can break. Stay on schedule with PLS replacement window glass inserts.

    Products
  • PLS 3R Replacement Window Glass Insert

    PLS laser levels are durable professional-grade tools that are made for construction environments. When dropped from a high enough distance, even the most rugged laser level glass can break. Stay on schedule with PLS replacement window glass inserts.

    Products
  • PLS 180R Replacement Window Glass Insert

    PLS laser levels are durable professional-grade tools that are made for construction environments. When dropped from a high enough distance, even the most rugged laser level glass can break. Stay on schedule with PLS replacement window glass inserts.

    Products
  • PLS 6R Replacement Window Glass Insert

    Minimize job site delays by using this quick in-field windows replacement. Replacement glass only for the PLS 6R red combination point and cross line laser.

    Products
  • PLS 6G Replacement Window Glass Insert

    Minimize job site delays by using this quick in-field windows replacement. Replacement glass only for the PLS 6G green combination point and cross line laser.

    Products
  • PLS 5G Replacement Window Glass Insert

    Minimize job site delays by using this quick in-field windows replacement. Replacement glass only for the PLS 5G green 5-point laser.

    Products
  • PLS 5R Replacement Window Glass Insert

    Minimize job site delays by using this quick in-field windows replacement. Replacement glass only for the PLS 5R red 5-point laser.

    Products
  • Fluke TiX580 Infrared Camera provides the ‘bigger picture’ for YELLOWSTONE LIVE on the National Geographic

    The four-day live event showcases the best of the greater Yellowstone ecosystem beginning on Sunday August 5th EVERETT, Wash., Aug. 3, 2018 – This summer’s biggest live event, YELLOWSTONE LIVE, shows the iconic park’s ecosystem in real-time over a four night period. With more geysers in the park than any other place on earth, the production team from Plimsoll Productions wanted to tell the story with as much detail as possible. They turned to Fluke infrared cameras to provide the temperature...

    Article
  • Fluke T6 Electrical Testers with FieldSense Technology take Gold Award in ACHR-The News Dealer Design Awards

    Innovative true-rms testers recognized for enabling HVAC technicians and electricians to troubleshoot electrical systems safer, faster, and more efficiently EVERETT, Wash., July 26, 2018 – The Fluke™ T6 Electrical Testers have won the Gold Award in the Testing and Monitoring Products category of the ACHR-The News Dealer Design Awards. The Dealer Design Awards program was established to honor excellence in HVACR product design. The prestigious awards showcase the most innovative products that...

    Article
  • Johnson & Johnson and Fluke Corporation explain the art of connecting the unconnectable assets at MaximoWorld

    Presentation explores an aspect of the show’s theme of ‘An Ecosystem for Asset Management’ for asset management professionals EVERETT, Wash., Aug. 6, 2018 – As an asset, reliability, or maintenance manager how do you best achieve overall equipment effectiveness? How do you change the culture of your organization to shift the profile and nature of the predictive maintenance demand? How do you develop maintenance standard models that align roles, missions, and focus to make teams more ‘connectable’?...

    Article
  • Fluke Calibration PM500 Pressure Measurement Modules provide an economical solution for conducting high-accuracy calibrations

    New pressure modules enable technicians to cover larger workloads EVERETT, Wash., April 10, 2018 – Fluke Calibration expands its line of pressure modules with the new PM500 Pressure Measurement Modules, a set of 46 modules ranging from low differential pressures up to 20 MPa (3000 psi). Designed for use with the Fluke Calibration 6270A Modular Pressure Controller/Calibrator and the 2271A Industrial Pressure Calibrator, the PM500 modules bridge the gap between the PM200 and PM600 Pressure Modules...

    Article
  • Fluke Calibration publishes second annual Calibration and Metrology Compensation Survey Results

    EVERETT, Wash., May 17, 2018 – Fluke Calibration has released the results of their second annual Calibration and Metrology Compensation Survey. Data collected in this survey shows median annual base salary information across multiple industries and disciplines in the field of metrology in the United States, and how those incomes differ between educational backgrounds, ranging from high school diploma to doctorate degree and including years of service and job roles, such as metrologist, calibration...

    Article
  • Fluke Pack30 Professional Tool Backpack allows maintenance professionals to easily carry, protect, and access all the tools they need for the day

    The rugged backpack features a versatile solution of more than 30 pockets and pouches to transport and protect a wide array of Fluke tools and accessories, hand tools, and tablets EVERETT, Wash., May 21, 2018 – It can be very inefficient — as well as frustrating — to run back and forth to grab additional tools because you can’t carry everything you need to the job site. The new Fluke® Pack30 Professional Tool Backpack makes it easy to organize, transport, and access all the tools you need...

    Article
  • Fluke Ti450 SF6 Gas Leak Detector is honored in Utility Products 2017 Product of the Year Awards

    The combination infrared camera and SF6 gas leak detector helps locate leaks to reduce utility equipment damage EVERETT, Wash., Feb. 21, 2018 – The Fluke® Ti450 SF6 Gas Leak Detector was recognized as one of the top products in the Utility Products 2017 Product of the Year Awards. The awards highlight the new products which received the most response from the magazine’s readers in 2017. This is the first honor for the Ti450 SF6, which was introduced in May 2017. Identifying leaks of sulfur hexafluoride...

    Article
  • eMaint CMMS takes top honors in Plant Engineering and Uptime Magazine awards

    The Fluke 3540 FC 3-Phase Power Monitor was also recognized as a part of the Fluke asset health system to help companies improve their maintenance and reliability programs. EVERETT, Wash., April 26, 2018 – eMaint computerized maintenance management software (CMMS) took tops honors in the Plant Engineering 2017 Product of the Year Awards winning the Gold Award in the Maintenance Software category. The Fluke 3540 FC 3-Phase Power Monitor took the Bronze Award in the Maintenance Tools and Equipment...

    Article
  • Rosendin Electric deploys cutting-edge Fluke Accelix Technologies to streamline processes and improve access to reliable real-time data

    Rollout of wireless Fluke Connect-enabled tools is a critical element in Rosendin’s drive to use the Internet of Things to take electrical commissioning to the next level EVERETT, Wash., Jan. 31, 2018 – Rosendin Electric, Inc., a national employee-owned company and one of the largest electrical contractors in the United States, is deploying the Fluke® 376 FC True-rms AC/DC Clamp Meter with iFlex® and Fluke 1587 FC Insulation Multimeter to all its commissioning teams at mission-critical project...

    Article
  • Fluke Corporation names David O’Reilly President of Fluke Digital Systems

    O’Reilly leads the team managing the Fluke Accelix ecosystem of connected tools and solutions EVERETT, Wash., Feb. 22, 2018 – Fluke Corporation has named David O’Reilly President of Fluke Digital Systems (FDS), the business unit that manages the Fluke Accelix™ ecosystem of connected tools and solutions which includes Fluke Sensors, eMaint CMMS, and SCHAD Mobile Work Management solutions. As president of FDS, he will lead the team to develop new solutions that harnesses the Industrial Internet...

    Article
  • Case study: Finding a Power Quality Needle in a 30-Mile Haystack

    At the end of April 2005, Crystal Mountain Resort in Washington suffered catastrophic failure of two power filters associated with their chair lifts.

    Article
  • No expertise required: Setting up aerospace vibration sensor

    To use vibration sensors, many maintenance and reliability personnel believe they have to be a vibration expert. For some sensors, this may be true. However, for the 3561 FC Vibration Sensors paired with Fluke Connect™ Condition Monitoring (FCCM) software, expertise is not required.

    Article
  • Fluke Ti400 PRO Infrared Camera

    Professional 320 x 240 Thermal Imager. Smartest, most intuitive user interface. Increased thermal sensitivity to capture the smallest differences. Latest technology for on-screen clarity.

    Products
  • Fluke T6 Electrical Testers win NECA Showstopper Award

    EVERETT, Wash., Oct. 28, 2014 – The Fluke® 1000FLT Fluorescent Light Tester has been recognized in the National Electrical Contractor Association (NECA) Showstopper Awards as one of the top products at the 2014 NECA Convention. The NECA Showstopper Awards highlight new products and services that help electrical contractors on the job. “The Fluke 1000FLT Fluorescent Light Tester gives electrical contractors a quick and easy way to test lamps in seconds versus the usual trial and error method...

    Article
  • Fluke 729 Automatic Pressure Calibrator is finalist in Control Engineering’s Engineers’ Choice Awards

    New pressure calibrator recognized for improving repeatability and simplifying the calibration process EVERETT, Wash., Oct. 31, 2017 – The Fluke® 729 Automatic Pressure Calibrator is a finalist in the Hardware — Handheld Test, Measurement, Calibration category of the Control Engineering 2018 Engineers’ Choice Awards The awards honor the best control, instrumentation, and automation products as chosen by the magazine’s subscribers. Print and online subscribers to Control Engineering may...

    Article
  • Fluke T6 Electrical Testers honored in AHR 2018 Innovation Awards

    New electrical testers with FieldSense Technology take simultaneous voltage and current measurements without test leads to troubleshoot electrical systems safer, faster, and more efficiently EVERETT, Wash., Oct 26, 2017 – The new Fluke® T6 Electrical Testers have taken top honors in the Tools and Instruments category of the AHR 2018 Innovation Awards. The winners were selected by a panel of third-party ASHRAE member judges who evaluated all award entries based on innovative design, creativity,...

    Article
  • Fluke 1740 Series Three-Phase Power Quality Loggers simplify collecting and reporting critical utility PQ data

    Powerful software automates analysis and reporting of data based on international standards to troubleshoot, quantify energy usage, and analyze power distribution systems EVERETT, Wash., Oct. 25, 2017 – The measurement, understanding, and reporting of power quality in distribution systems requires capturing large amounts of data and then spending hours to analyze and report. With powerful software that automates setup, analysis, and reporting, the Fluke 1740 Series Power Quality Loggers simplify...

    Article
  • Finalist in Plant Engineering’s 2017 Product of the Year Awards

    New power monitor streams continuous measurements to troubleshoot even difficult intermittent problems EVERETT, Wash., Nov. 14, 2017 – The Fluke® 3540 FC Three-Phase Power Monitor has been named a finalist in the Maintenance Tools and Equipment category of the Plant Engineering 2017 Product of the Year Awards. The awards honor new products that help professionals do their jobs smarter, safer, more efficiently, and more productively as chosen by the magazine’s subscribers. Print and online...

    Article
  • New Fluke Ti450 and Ti480 PRO Infrared Cameras capture and display smaller temperature differences to easily visualize and diagnose issues

    Fluke announces enhancements that make it easier for technicians, engineers and electricians to get to root cause faster EVERETT, Wash., Nov. 15, 2017 – When diagnosing problems, capturing and displaying small temperature variances makes all the difference. The new Fluke® Ti450 and Ti480 PRO Series Infrared Cameras have increased thermal sensitivity to capture minute differences and the latest Fluke technology for on-screen clarity to make it easy to visualize issues in the field. With the enhanced...

    Article
  • New Fluke FieldSense technology enables simultaneous voltage and current measurements without metallic contact

    New true-rms T6 Electrical Testers — the first tools with FieldSense technology — are now available EVERETT, Wash., Dec 4, 2017 – Troubleshooting electrical systems has traditionally required gaining access to metallic contact points so the test leads can make contact. And while pen-style non-contact voltage testers have been available for some time, these tools only detect voltage. They do not give the user a measured value. Fluke has now developed FieldSense technology that takes the open-fork,...

    Article
  • Fluke Accelix adds wireless vibration monitoring

    Fluke 3560 FC wireless sensor provides continuous, automated vibration screening to monitor equipment health EVERETT, Wash., Dec. 5, 2017 – Vibration screening is one of the most effective ways to detect and prevent equipment failures or downtime, but performing vibration analysis can be complex. Vibration monitors typically require special training, third-party experts, or are too expensive to use on most equipment leaving significant gaps in maintenance programs. The new Fluke® 3560 FC Vibration...

    Article
  • Fluke 3550 FC Thermal Imaging Sensor is honored in Processing’s 2017 Breakthrough Product of the Year Awards

    New sensors recognized for enabling managers to remotely inspect critical equipment, allowing for a real-time picture of an asset’s condition EVERETT, Wash., Dec. 11, 2017 – The Fluke® 3550 FC Thermal Sensor has taken top honors in Processing’s 2017 Breakthrough Product of the Year Awards. The awards recognize product, technology, and service solutions that made significant contributions in the process industries within the last year and that are expected to have impact for years to come....

    Article
  • Fluke Accelix integrates condition monitoring, CMMS and SCADA to advance data-driven maintenance

    New release of eMaint CMMS solution fully integrates with Fluke Connect Condition Monitoring and SCHAD Automatic Meter Reading EVERETT, Wash., Dec 12, 2017 – Fluke today released a new version of its award-winning eMaint computerized maintenance management software (CMMS), with improvements that include integration with Fluke Connect® Conditioning Monitoring Software and SCHAD, enabling full integration with supervisory control and data acquisition (SCADA) systems. Version 11.4.5 of eMaint provides...

    Article
  • Fluke 2271A Industrial Pressure Calibrator

    Everything you need to calibrate and test pressure transmitters and gauges, all in one box

    Products
  • Fluke Ti450 PRO Infrared Camera

    The Fluke Ti450 PRO introduces a leading-edge visual infrared experience in a professional 320 x 240 thermal imager.

    Products
  • Fluke Ti480 PRO Infrared Camera

    Get a leading-edge visual infrared experience in a professional 640 x 480 thermal imager.

    Products
  • Fluke Connect wins AHR Expo Innovation Award

    Fluke Connect™ will be presented with the top honor in the Innovation Awards software category this week at AHR Expo held at McCormick Place in Chicago. The full Fluke Connect system will be on display in the Fluke booth, demonstrating how it speeds the inspection of HVAC/R and electrical systems to keep them operating at peak efficiency.

    Article
  • Ensuring reliable communications at the biggest game of the year

    For more than 100 million fans around the world, there is one big game they wait all year to watch on TV. So imagine how they would feel if communications failed and they were left looking at a blank screen. Thanks to Seattle-based WBL Services, that isn’t going to happen.

    Article
  • Fluke Connect™ wins Electronic Products 2014 Product of the Year Award

    The Fluke Connect™ system was picked by the editors of Electronic Products magazine to receive a 2014 Product of the Year Award. Chosen from thousands of products introduced last year, the selection of Product of the Year winners is based on “a significant advance in technology or its application, innovation in design, or gain in price/performance.”

    Article
  • Fluke Connect and Fluke 714B Thermocouple Temperature Calibrator are honored in Control Engineering Awards

    The Fluke Connect™ System and the Fluke® 714B Thermocouple Temperature Calibrator were honored in the Control Engineering 2015 Engineers’ Choice Awards. The 714B won in the Hardware – Test, Measurement, Calibration category and Fluke Connect™ app received an honorable mention in the Software – Mobile Apps for Control, Automation, Instrumentation category.

    Article
  • Fluke Connect and Fluke Ti400 Infrared Camera are honored in Plant Engineering Awards

    The Fluke Connect™ System and the Fluke® Ti400 Infrared Camera were honored in the Plant Engineering 2014 Product of the Year Awards. Fluke Connect won the Gold Award in the Apps for Engineers category and the Ti400 won the Silver Award in the Maintenance Tools and Equipment category.

    Article
  • Fluke displays new 500 Series Battery Analyzers at Intersolar North America Conference

    Fluke Corporation, the world’s leading supplier of handheld digital multimeters and other test and measurement equipment, will be displaying its new 500 Series Battery Analyzers at Intersolar North America Conference, July 14 – 16 in the Moscone Center West Hall in San Francisco.

    Article
  • Fluke Connect wins Gold ACHR-The News Dealer Design Award

    The Fluke Connect® cloud-based wireless system of software and test tools won the Gold Award in the testing and monitoring products category of the 2015 Dealer Design Awards sponsored by The Air Conditioning Heating & Refrigeration News magazine (ACHR-The News). The award recognizes excellence in HVAC/R product design.

    Article
  • Fluke Connect campaign honored at TED Best of the Best Awards

    The product launch marketing campaign for the Fluke Connect® cloud-based wireless system of software and test tools was named best brand awareness campaign in the supplier over $250 million category in the tED Magazine 2015 Best of the Best Awards. The award was presented on August 10th at the National Association of Electrical Distributors AdVenture Conference in Chicago.

    Article
  • Students demonstrate their skills in the 2015 Fluke Connect Student Contest

    Fluke Corporation invites students enrolled in two and four year colleges, universities, trade/tech schools, and apprenticeship programs in the United States to demonstrate their skills and innovation in the 2015 Fluke Connect Student Contest. The first place team and their advisor will receive an all-expenses paid trip to visit Fluke Park for three days and two nights plus $3,500 worth of Fluke tools for the school’s department.

    Article
  • Fluke TiX560 Infrared Camera is honored in 2016 Control Engineering Awards

    The Fluke® TiX560 Infrared Camera has taken the top prize in the Hardware – Test, Measurement, Calibration category of the Control Engineering 2016 Engineers’ Choice Awards.

    Article
  • Fluke Presents at Rockwell Automation Fair

    Fluke Corp. is presenting a technical session at the Rockwell Automation’s Automation Fair 2015 Nov. 18-19 at McCormick Place West in Chicago. “An Overview of Asset Management and Predictive Maintenance” will be presented from 1:00-2:00pm on both days of the fair in Room W476 by Tony Shockey, Thermography Services Manager, and Ashish Guttedar, Senior Product Manager for Fluke.

    Article
  • Electrical Measurement Safety Free Course

    Fluke Corp. is offering a free new online course: Fluke Electrical Measurement Safety. It features guidance reflecting the latest information on how to minimize potential hazards when performing electrical measurements. The four-hour course is intended to provide guidance to anyone who works with electricity, including electricians, maintenance professionals, engineers, construction workers, HVAC technicians, electrical contractors, and facility engineers.

    Article
  • Fluke announces the finalists in the 2015 Fluke Connect Student Contest

    Fluke Corporation announces the finalists in the 2015 Fluke Connect® Student Contest, which tests the skills, innovation, and business application of student teams enrolled in two and four year colleges, universities, trade/tech schools, and apprenticeship programs in the United States.

    Article
  • Fluke integrates temperature data with LabVIEW and MATLAB software

    Infrared measurement adds important and often revealing data to certain types of R&D analysis, but it hasn't always been easy to incorporate these measurements into experiments and reports. To close that gap, Fluke Corp. has introduced a new software feature that integrates high-resolution thermal data from the company's TiX580, TiX560, TiX1000, TiX660, TiX640 and TiX620, infrared cameras with National Instruments' LabVIEW and MathWorks' MATLAB software, leveraging the strength of those powerful platforms and making it easy to add high-resolution infrared data, video and images to R&D analysis and reporting.

    Article
  • Plant Engineering recognizes the Fluke Connect reliability platform

    Fluke® Condition Monitoring and the Fluke® 279 FC Thermal Multimeter are finalists in the Maintenance Tools and Equipment category of the Plant Engineering 2016 Product of the Year Awards. The awards honor new products that help professionals do their jobs smarter, safer, more efficiently, and more productively as chosen by the magazine's subscribers.

    Article
  • New Fluke motor and drive troubleshooting online course supplies mission-critical skills to industrial, commercial, maintenance workforce

    Constantly troubleshooting the same motor and drive problem is not only annoying, it has a serious impact on uptime and the cost of doing business. But all too frequently, technicians lack the diagnostics skills necessary to troubleshoot the problem.

    Article
  • Fluke Connect Assets takes the Gold in the Consulting-Specifying Engineering Product of the Year Awards

    Fluke Connect® Assets has won the Gold Award in the Apps for Engineers category in the Consulting-Specifying Engineering 2016 Product of the Year Awards. The awards recognize the best products in the HVAC, fire/life safety, electrical, and plumbing systems engineering markets.

    Article
  • Fluke acquires eMaint Enterprises

    Fluke Corporation, the world leader in electronic test tools and software, has acquired eMaint Enterprises, LLC, a global leader in computerized maintenance management software (CMMS). eMaint’s award-winning software platform is used by more than 50,000 maintenance professionals in 55 countries providing asset management solutions in multiple markets including food processing, healthcare, facilities, fleet, services, manufacturing, and more. No further details were announced.

    Article
  • Fluke Connect Chief Architect on “Mobile Worker Enablement” panel at Smart Industry 2016

    Chief Architect and Director of Product Management for Fluke Connect, John Neeley, will be a panelist at Smart Industry 2016, to be held at The Drake Hotel, Chicago, September 26-28. Together with Fluke customer Linamar Corporation, Neeley will demonstrate the benefits of adopting wireless, mobile condition based maintenance technology. The “Mobile Worker Enablement” panel, part of the Cloud and Mobility track at the Industrial Internet of Things (IIoT) show, will be held at 4:00pm on Tuesday, September 27th.

    Article
  • Catch a first look of Fluke Condition Monitoring at WEFTEC 2016

    Water treatment system managers and technicians will get a first look at the new Fluke Condition Monitoring system at the 89th Annual Water Environment Federation Technical Exhibition and Conference (WEFTEC) to be held at the New Orleans Morial Convention Center, September 24-28. Fluke will be showing Fluke Condition Monitoring and an assortment of Fluke Connect wireless test tools for hands-on evaluations at booth 8320.

    Article
  • Fluke TiX620 Infrared Camera offers superb, affordable image quality

    Fluke Corp. introduces the new Fluke® TiX620 Infrared Camera, joining the TiX640, TiX660 and TiX1000 models as part of the Fluke Expert Series. The TiX620 is an ideal infrared camera for the experienced thermographer. Its 640 x 480 resolution provides high measurement accuracy and 5.6 inch high-resolution LCD screen affords a premium in-field viewing experience making identification of problem spots quicker and easier. The large screen enables thermographers to identify issues and edit images directly on camera while still in the field — reducing time in the office that was previously spent optimizing images and generating reports.

    Article
Chat with ourFluke assistant
Clear Chat