New Fluke products
Pomona PVLEAD3 MC4 Solar Clamp Test Lead Set
The Pomona MC4 Solar Clamp Lead Set creates a connection between a solar panel and inverter for troubleshooting and maintenance of PV systems with compliance to CAT III 1000V / CAT IV 600V, 20A ratings in accordance to IEC / EN 61010-031.
Pomona PVLEAD1 MC4 to 4 mm Test Lead Set
The Pomona MC4 Adapter Lead Set is an important accessory for solar maintenance, ensuring safe current and voltage measurements on PV modules and systems with compliance to CAT III 1000V / CAT IV 600V, 20A ratings in accordance to IEC / EN 61010-031.
Fluke MDA-550 Series III Motor Drive Analyzer
The Fluke MDA 550 Motor-Drive Analyzer saves time and eliminates the hassle of setting up complex measurements, while simplifying motor-drive troubleshooting.
Fluke Calibration P5514B Hydraulic Pressure Comparator
The P5514B Hydraulic Pressure Comparator is a simple, robust and economical pressure comparison test pump for calibrating gauges, switches and transducers with precise, fine adjust capabilities. It generates pressure to 10 000 psi (70 MPa), with a new Vernier fine-adjustment control that enables cardinal point calibrations. The P5514B is easily mounted on a bench or used in mobile applications. Its improved design and functionality simplifies pressure testing compared to its’ predecessor the P5514.
Fluke 190 Series III ScopeMeter® Test Tools
Fluke 190 Series III ScopeMeter Test Tools are CAT III 1000 V/CAT IV 600V rated and combine rugged portability with the high performance of bench oscilloscopes for installing, commissioning and maintaining industrial machinery, automation and process controls, and power conversion electronics from DC to 500 MHz.
Fluke FEV100 Electric Vehicle Charging Station EVSE Test Adapter
Fluke FEV100 EVSE Tester Adapter is essential electrical safety test equipment for EVSE systems from installation electric vehicle charging equipment to troubleshooting.
Fluke 393 FC CAT III 1500 V True-rms Clamp Meter with iFlex
The 393 FC CAT III 1500 V True-rms Clamp Meter with iFlex is designed for technicians who work with high voltage dc: solar arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp will measure up to 1500 V dc, 1000 V ac, and up to 999.9 A dc or ac through the clamp jaw.
Fluke 377 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex
The Fluke 377 FC and 378 FC Clamp Meters let you measure voltage and current with your clamp jaw, all without touching a live wire, using FieldSense™ technology. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.
Fluke 378 FC Non-Contact Voltage True-rms AC/DC Clamp Meter with iFlex
The Fluke 377 FC and 378 FC Clamp Meters let you measure voltage and current with your clamp jaw, all without touching a live wire, using FieldSense™ technology. Simply clip the black test lead to any electrical ground, put the clamp jaw around the conductor and see reliable, accurate voltage and current values on the display.
Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester
Solve the #1 cause of Industrial Ethernet downtime. The LinkIQ™ supports EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols, qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s) and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE and load testing up to Class 8(90W).
Fluke ST120+ GFCI Socket Tester with Beeper
The Fluke ST120+ GFCI Socket Tester with Beeper checks that each wire in the outlet is properly connected to the building's electrical system.