The world’s most popular multifunction process tools, calibrate almost anything

Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke 740 or the new 750 series calibrator's documenting features.

The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure connections to clamp and screw type terminal blocks.

The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT.

The 700G/Track easy-to-use software manages your 700G gauge and upload measurements logged remotely for display or export for reports.

High Pressure Premium Fittings, BSP Fittings, 21 MPa (3000 psi)

High Pressure Premium Fittings, Metric Fittings, 21 MPa (3000 psi)

High Pressure Premium Fittings, NPT Fittings, 21 MPa (3000 psi)

High Pressure Pneumatic Calibration Manifold, 21 MPA (3000 psi)

The Fluke 700HTH-1 hydraulic test hose is a 10,000 psi, 690 bar working pressure test hose that features stainless steel and nylon construction for use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test.

The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.

The Fluke 700ILF can be used to isolate the calibrator from the incidental contract with fluids.

The Fluke 700LTP-1 is a hand operated pressure pump designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar. The Fluke 700LTP-1 has two pressure ports with quick fit connectors. Test hoses are terminated with 1/4-NPT female fittings that can be adapted using the BSP/ISO adapters.

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.

The Fluke-700PTP-1 pneumatic test pump is capable of supplying pressures up to 600 psi, 40 bar.

RTD Probe for 721 and 719Pro

Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs, measurement range and accuracy: probe dependent, suitable for low voltage applications(below 30 V AC, 60 V DC).

Isothermal screw terminal for J wire, suitable for up to 20 gauge thermocouple wire.

Isothermal screw terminal for K wire, suitable for up to 20 gauge thermocouple wire.

Type-K thermocouple for general purpose applications, measurement range: -40 to 260 °C.

Type K, extra large thermocouple clamps securely to larger pipes for fast temperature and superheat measurement.

Designed for hands free measurement of HVAC temperature measuring applications, use multiple and leave in place for route based routine maintenance.

Type-K thermocouple for use in liquids and gels, measurement range: -40 to 1090 °C.

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated baffle.

Type-K thermocouple suitable for food industry, liquids and gels, measurement range : -40 to 260 °C.

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Type-K thermocouple for surfaces in rugged environment, durable ribbon sensor, measurement range: -127 to 600°C.

Type-K thermocouple for flat or curved surfaces such as plates and rollers, measurement range: 0 to 260 °C.

Type-K thermocouple surface, air and non-caustic gases

Operates with T-type thermometers, measurement range : -196 to 350 °C.

The 90i-610s is a clamp-on AC/DC Current Probe designed to measure current waveforms in automotive applications with any Test Tool capable of millivolt measurements.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Single probe pierces 0.25 to 1.5 mm insulated wire.

Battery charger UL, CSA, MITI, DEMKO, FINKO, SEMKO recognized.

Fluke BC7240 Battery Charger/Eliminator for the 75x Documenting Process Calibrator.

7.2 V 3500 mA-hour rechargeable Ni-MH battery pack.

Fluke BP7240 Li-Ion Battery Pack for the 75x Documenting Process Calibrator.

Hard carrying case with custom-cut foam liner

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Expand the power of the world's most rugged, accurate handheld test tools with FlukeView® Forms Documenting Software.

SureGrip Fused Test Probes with built-in replaceable fuses for additional measurement protection.

Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating

Heavy duty construction with mounting holes

Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads, VPS40 and TL75 Test Leads. Accepts wires up to 2.5 mm. The contact material is made of reinforced nickel plated steel

Set of four Hook Clips (two red and two gray).

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. Buy Online Now.

Extend the current ranges of multimeters with a single range 200 A clamp-on AC Current Clamp with safety shrouded banana plugs. Buy Online Now.

Small sized AC current clamp Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current.

Designed for use with multimeters, recorders, and safety testers for accurate non-intrusive AC current measurements. Buy Online Now.

Keep your multimeter test leads from tangling with Fluke’s LeadWrap test lead wraps. Three 8-inch (20 cm) hook & loop fasteners per package

Set of two (one red, one gray) double insulated silicone shielded test leads for noise free measurements.

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with adjustable length test tips. Test leads as tough as your meter.

This test lead set with test probes works in multiple electrical applications. SureGrip™ feature is designed to do your work with comfort.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Includes 3 test lead accessories in an all-in-one set. Ideal starter kit for electrical applications.

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold resistant.

PVC insulated test leads with right-angle shrouded banana plugs. Recommended for general purpose measurements.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.

Handy all-in-one kit that includes 3 Test Lead Sets.

Special value SureGrip Set for industrial applications.

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224 test leads.

Ideal for electronics test and design, this master set includes 11 items in a handy pouch.

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in different environments. Buy Online Now.

Provides firm and secure contact.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

Recommended for use with TL222 and TL224

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire.

Replacement tips for TL910.

Set of push-on adapters for TL71 and TL75 test probes.

7.5 V DC battery eliminator for operation of calibrator from 120 volt AC line. UL/CSA recognized.

The Fluke 80PK-8 Pipe Clamp Temperature Probe uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Buy Online Now.

When your job depends on every tool in your toolbox, Fluke test leads keep you working. Plated test lead tips stay sharp and accurate.

The Fluke 700PRV-1 consists of a relief valve settable from 725 to 5800 PSI (50 to 200 bar) to be used with the 700HTP-1 Hydraulic Test Pump.

A kit of 7 mini-plug connectors.

Translucent accessory hoses allow the technician to easily identify if there is oil or other contaminants in the hose before they get into your calibrator.

Extending and repairing J-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

The 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger sized 80PK-10 pipe clamp, to give you a full range of measurement sizes.

Extending and repairing T-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized.

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more.