Fluke TL75 Hard Point™ Test Lead Set
Model#: Fluke TL75Part#: 855705UPC#: 0 95969 01158 7
Fluke TL75 Hard Point™ Test Lead Set is rated out of 5 by 32.
Key features
- Single unit combining a test lead and probe, measuring 48 inches (1.22 meters) in length
- PVC-insulated probes, ensuring secure and accurate measurements
- CAT II 1000 V, 10 A rated, When the protective caps are placed on the leads, the rating jump up to CAT IV 600 V, CAT III 1000 V
- see compatible products below
In stock
$39.99
Save 15% with code
FLUKE-15-CUSTOMERFAVES
Product overview: Fluke TL75 Hard Point™ Test Lead Set
Product overview: Fluke TL75 Hard Point™ Test Lead Set
The Fluke TL75 Hard Point™ Test Leads are a set of comfort grip, PVC-insulated probes. TL75s offer the convenience of a test lead and probe together in one unit with a variety of connections. This set of test leads are recommended for all general-purpose measurements and are compatible with a wide range of Fluke meters and tools.
Designed for safety
The Fluke TL75 Hard Point™ Test Lead Set is CAT II 1000 V, 10 A rated. When the protective caps are placed on the leads, the ratings jump up to CAT IV 600 V, CAT III 1000 V.
Compatible with Fluke alligator clips
Expand your measurement capabilities with special adapters to your TL75 set. Add alligator clips or adapters to accomplish even more:
What's in the box:
- One pair (red, black) PVC-insulated leads with banana plug end connectors
- Two protective caps
- One-year warranty
Specifications: Fluke TL75 Hard Point™ Test Lead Set
Models: Fluke TL75 Hard Point™ Test Lead Set
Fluke TL75
Part#: 855705UPC#: 0 95969 01158 7
- One pair (red, black) of comfort grip probes
- 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
Rated 3 out of 5 by Kerry from Good standard DMM lead set. Ordered a replacement set of leads for my Fluke 179 DMM - my original set were getting old (15+ years). I was told by a Fluke technician that TL75 were the set to replace my original set. This set is Ok but the PVC insulation is more stiff than my original set. I returned them and will order Fluke set TL76 (has silicone insulation and should be more flexible). I just wish Fluke would keep their manufacturing in the United States.
Date published: 2022-10-15
Rated 2 out of 5 by More than one Jimmy from Very stiff It seems that these leads are made of hard plastic imported from somewhere else across the pond. They work but are very stiff and remain stiff so, even if they are outside in the truck tool box in Texas heat.
Look at something else as these will irritate you to no end. Sad that the Fluke has gone and done the cheep think like everyone else.
I purchased this item directly from Fluke online.
Date published: 2024-08-09
Rated 2 out of 5 by aball from They break internally, cheaply made They don't make very good contact, requiring more pressure than others to get a reading. Then after a few years, they break, like others have said. I'm buying Probe Masters now, Made in USA, and work much better.
Date published: 2022-04-14
Rated 2 out of 5 by SamC from Not as good as I expected I bought the Fluke 87V, Superiority and Excellence for the multimeter. Probes are an interface for measuring and these probes that came with it were poor quality. I can tell that their older probes from 90's and 2000's were much better made. The older ones I used were in industry and they were fluid, easy to bend, tough ends, and long. The TL75 is complete opposite. They are...
1. stiff
2. the cables still have fold creases from manufacturing and wont go away. I have used them quite a bit!
3. the lead points look and feel cheap
4. too short in length
5. made of some crappy plastic that shows that cutting cost is more important than quality
2 stars for longevity and not failing. I will be looking for replacements for this meter. I suspect based on the other reviews of their leads I will be looking else where. I hope that they improve on this because I am a brand person and I like sticking with matching high quality equipment. Lastly, I would have no problem shelling out way more money for something extremely high quality. Especially using and experiencing their older leads showed me how great they can be!
Note: accuracy will be used to judge performance of measurement and how easy they were to keep in place to get a measurement. ex. holding it on a tiny to get a measurement and the stiffness keeps pushing hand around!
Date published: 2020-10-27
Rated 1 out of 5 by Kwik from Budget leads These came with a fluke-325 and they do not belong with and industrial meter. They get stiff in cold weather so avoid these if you have any work outside, even -10C is too cold for these. They also lack quality strain reliefs I've come to expect from fluke. I will be looking for a different set.
Date published: 2021-02-04
Rated 1 out of 5 by MWBowen from very poor not for ourdoor use Watch out for these leads if you intend to use your meter ouside. The operating temp range is 18C to 28C (basically room temperature) if used outside below freezing these leads get very brittle and the insulation cracks and exposes the conductor. ** VERY DANGEROUS** Consider using the Fluke TL175 if you plan to take your meter out into any filed applicaions
Date published: 2014-03-12
Rated 1 out of 5 by lanchile007 from Very poorly made! These TL75 test leads are very poorly made like the ones that you find at a Radio shack stores or Wallmart. I think Fluke should take these TL75 leads out of production. and the worse is when you buy the best of the best multimeter....The Fluke 87V and you find inside these probes.... aaaagg!!!. Now I have to buy some "decent" Pomona probes for my Fluke 87V.
I can ONLY complaint about the TL75 test leads quality here, all the Fluke multimeters are EXCELLENT, even those low end meters made in China (17B)are top notch.
PS:Fluke is well known for their quality products...TL75 do not belong in the Fluke company !
Date published: 2013-08-04