Fluke TL175 TwistGuard™ Test Leads

  • Fluke TL175 TwistGuard™ Test Leads | Fluke
  • Fluke TL175 TwistGuard™ Test Leads | Fluke
  • Fluke TL175 TwistGuard™ Test Leads | Fluke

Key features

  • Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements
  • New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement
  • Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures
  • Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure
  • Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs
  • Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
  • TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip
  • Probes always show correct category rating for tip being used
  • Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)
  • Conforms to EN61010-031
  • One-year warranty
Fluke TL175 TwistGuard™ Test Leads is rated 4.3 out of 5 by 12.
  • y_2018, m_8, d_11, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_fluke-tl175, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 28.44ms
  • REVIEWS, PRODUCT
Fluke online store

Product overview

The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. The TwistGuard™ adjustable tips enhance safety and versatility length. The WearGuard™ indicator shows damage to leads and provides heavy duty strain relief to withstand over 30,000 bends.

Models

Fluke TL175
Fluke TL175 TwistGuard™ Test Leads

Specifications

Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Exposed probe tip length: 19 to 4 mm (0.75 to 0.16 in)
Environmental ratings: -20°C to 55°C (-4°F to 131°F), altitude: 2000 m (6,562 ft)

TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip.
Conforms to EN61010-031

Resources

Compatible products

Rated 2 out of 5 by from Brittle Tips I enjoyed using them for a few weeks, but left the tips exposed, rather than retracted, and found one of them bent sideways. I tried to straighten it out but it snapped clean off. There is now way to replace just the tips. I was very disappointed.
Date published: 2018-03-30
Rated 5 out of 5 by from Simple, Effective The Fluke TL175 TwistGuard Test Leads are the best leads i have used in my 26 yrs of experience thus far. Simple to use, very durable, affordable. What more could be better? And as always Fluke stands behind there products with exceptional customer service. With a name like Fluke you know it is a quality product.
Date published: 2016-12-11
Rated 5 out of 5 by from Greatest thing I have used with my meter yet! First off, these are amazing. They work well, are very durable, and add a whole new level to safety. I really like the small surface area for testing in tight spaces, along with the ability to twist them to expose the entire probe for more traditional feel while testing where touching close parts is'nt an issue.
Date published: 2016-12-08
Rated 5 out of 5 by from very useful I like the easy to use TwistGuard feature. Exposed probe when needed and protected when in tight spaces.
Date published: 2016-12-07
Rated 4 out of 5 by from Concerned about which TL175 I purchased. In a Fluke youtube video “Fluke Test Leads, Probes and Accessories” published on Aug 25, 2013 the TL175s are shown with the gray Fluke label on the probe. In an independent youtube video review of the TL175 there is a comment claiming Fluke supposedly stated that only the TL175s with the "yellow" Fluke label are licensed for the US. Yet the Fluke video as well as a set I recently purchased in the US have the gray Fluke branding not the yellow branding on the probes. I was suspicious since this is the second TL175 set that I purchased and the first set (yellow) was in Fluke packaging while the second set (gray) came in clear bag. There is clearly a quality difference in the twist mechanism between the two sets which has me concerned about differences that I cannot see related to safety. There is no country of origin on the gray set (or the yellow set) and they look exactly as they appear in the Aug 25 Fluke youtube video. Can I assume Fluke stands behind the set without the yellow Fluke branding specifically related to the safety ratings? Assuming the two sets are equal in safety and based solely on the twist mechanism, I would have rated the yellow branded probes 5 stars and the gray branded probes 3 stars.
Date published: 2014-10-11
Rated 5 out of 5 by from I am interested in this product Do these leads fit the t5-600 banana plug? I would like to purchase this product if it fits my meter.
Date published: 2013-10-18
Rated 5 out of 5 by from Very good quality! I just got these test leads two days ago. I can say that they are very well made, No surprise, they are Fluke quality. I noticed that when I twist the probe and the tip "cover" goes up, the click is VERY soft...I would say too soft. I would like it better the same way as when it is going down that is a little harder and the click is louder. I know it is a stupid thing to complaint but, it is just me. other thing will be the hard plastic material used in the shrouded banana, I would prefer to see it "flexible". I know for fact that the TL75 uses the same kind of hard plastic and one time I pressed it a little bit and it cracked!!! Right now I have pomona 5519A test leads too that I like very much and they use a very nice soft shrouded banana plugs that are very flexible and I can literally "squeeze" them and they will not crack at all. Beside those two things, I can say these leads are very good and they are a must to have. Fluke should include these TL175 test leads with all 170, 80 Multimeter series and top models (all made in the USA). I have used many test leads and so far I can strongly recommend these Fluke TL175 and the Pomona 5519A. I find it very good to post reviews here at Fluke main page, because We can let Fluke know what We want and what We need. To me Fluke is doing an excellent job building those multimeters that are well known for their Quality, accuracy and reliability. I only use the best....I only use Fluke!.
Date published: 2013-08-23
Rated 5 out of 5 by from Very good quality! I just got these test leads two days ago. I can say that they are very well made, No surprise, they are Fluke quality. I noticed that when I twist the probe and the tip "cover" goes up, the click is VERY soft...I would say too soft. I would like it better the same way as when it is going down that is a little harder and the click is louder. I know it is a stupid thing to complaint but, it is just me. other thing will be the hard plastic material used in the shrouded banana, I would prefer to see it "flexible". I know for fact that the TL75 uses the same kind of hard plastic and one time I pressed it a little bit and it cracked!!! Right now I have pomona 5519A test leads too that I like very much and they use a very nice soft shrouded banana plugs that are very flexible and I can literally "squeeze" them and they will not crack at all. Beside those two things, I can say these leads are very good and they are a must to have. Fluke should include these TL175 test leads with all 170, 80 Multimeter series and top models (all made in the USA). I have used many test leads and so far I can strongly recommend these Fluke TL175 and the Pomona 5519A. I find it very good to post reviews here at Fluke main page, because We can let Fluke know what We want and what We need. To me Fluke is doing an excellent job building those multimeters that are well known for their Quality, accuracy and reliability. I only use the best....I only use Fluke!.
Date published: 2013-08-23
  • y_2018, m_8, d_11, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_fluke-tl175, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 49.09ms
  • REVIEWS, PRODUCT