Fluke TL224 SureGrip™ Insulated Test Leads

  • Fluke TL224 SureGrip™ Insulated Test Leads | Fluke
  • Fluke TL224 SureGrip™ Insulated Test Leads | Fluke

Key features

  • DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
  • Right angle connector on one end and straight connector on the other 
  • Reinforced strain relief
  • 1.5 meter silicone-insulated wire resists heat & cold
  • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
  • One year warranty
Fluke TL224 SureGrip™ Insulated Test Leads is rated 2.2 out of 5 by 6.
  • y_2018, m_9, d_12, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_fluke-tl224, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 22.68ms
  • REVIEWS, PRODUCT
Buy now

Product overview

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Models

Fluke TL224

Resources

Compatible products

Rated 2 out of 5 by from Dissappinted I got this with my kit. They were working fine but now i have an open at the straight end.
Date published: 2018-07-12
Rated 1 out of 5 by from Expensive and don’t last Seemed like a high quality item initially. They were well cared for- neatly wrapped and secured with a fluke lead wrap and stored in a veto meter bag. Out of nowhere one of the leads devoleped an open rendering it useless. Luckily I had a spare set of radio shack leads on the van and they have long outlasted the flukes.
Date published: 2018-06-14
Rated 1 out of 5 by from Not what I expected from Fluke Working in mechant marine industry for more than a decade and got those leads as part of the 87VE2 kit about 2 years ago. Unfortunately the black lead "broke" internally on the banana plug. I was lucky that I didn't work that time on the 440vac power circuit. Now I am looking for a reliable alternative.
Date published: 2018-06-04
Rated 1 out of 5 by from Wire breaks internally at straight end - 3 sets I work in an industrial environment and have gone through several pairs of these test leads in a year. Initially, I thought that it was due to wrapping the leads around the multimeter. So with the next set I used, I made sure to hang the leads after use so that there was no bending going on; again, no luck. The same thing happened with the third set despite my best efforts to prevent wire breakage internally. The test leads always break in the same place: right next to the "straight" connection, just after the strain relief. The internal breaking of the wire leads to erratic results and potentially a safety issue. The standard test leads that come with a Fluke 114 or 175 multimeter last much longer than this style of test leads. They warrant these things for a year, but either way, they never come close to lasting that long. These leads only get used two to three times a week on average.
Date published: 2015-10-19
Rated 4 out of 5 by from Great set of leads I have purchased many sets of these leads over the years. I work in the HVAC automation industry and I like the versatility these leads offer. I often use a pair of AC220 aligator clips and use one as a jumper wire or a probe on each end and use it as a jumper where aligator clips won't fit. The only problem I've ever had is the wire will pull from one of the banana plugs over time and lose connection. The actual wire jacket and strain relief stay intact, I guess flexable nature of the wire allow the actual conductor to pull over time and the connection breaks. I usually buy a new set every six months.
Date published: 2012-11-18
Rated 4 out of 5 by from Great set of leads I have purchased many sets of these leads over the years. I work in the HVAC automation industry and I like the versatility these leads offer. I often use a pair of AC220 aligator clips and use one as a jumper wire or a probe on each end and use it as a jumper where aligator clips won't fit. The only problem I've ever had is the wire will pull from one of the banana plugs over time and lose connection. The actual wire jacket and strain relief stay intact, I guess flexable nature of the wire allow the actual conductor to pull over time and the connection breaks. I usually buy a new set every six months.
Date published: 2012-11-18
  • y_2018, m_9, d_12, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_fluke-tl224, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 24.61ms
  • REVIEWS, PRODUCT