Fluke 376 FC True-RMS Clamp Meter with iFlex
Model#:Fluke 376 FC with 18-inch iFlexPart#:5065965UPC#:0 95969 79839 6
Fluke 376 FC True-RMS Clamp Meter with iFlex is rated out of 5 by 49.
Key features
- Measures AC current with included 18-inch or 36-inch iFlex current probe
- VFD low pass filter for accurate measurements of non-linear signals
- Remotely log, trend and monitor to pinpoint intermittent faults
- Inrush measurement to filter out noise and capture starting current
In stock
$659.99
Product overview: Fluke 376 FC True-RMS Clamp Meter with iFlex
The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.
Find the cause of difficult problems
The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
Measure:
- Voltage to 1000 V AC or DC
- Resistance to 60 kΩ with continuity detection
- Min, max, average, and inrush recording to capture variations automatically
- 500 mV DC measurement range to interface with other accessories
- 1000 μF capacitance measurement
- Work safely and conveniently
- The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.
The included 18-inch or 36-inch iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:
- Expands the measurement range to 2500 A AC
- Allows frequency measurement to 500 Hz with body jaw and iFlex
What's in the box:
- Fluke 376 FC True-RMS Clamp Meter
- 18-inch or 36-inch iFlex® Flexible Current Probe
- TPAK magnetic hanging strap
- TL75 Test Leads
- Two AA batteries (Installed)
- Soft carrying case
Specifications: Fluke 376 FC True-RMS Clamp Meter with iFlex
| General Specifications | ||||||
| AC Current via Jaw | ||||||
| Range | 999.9 A | |||||
| Resolution | 0.1 A | |||||
| Accuracy | 2% ±5 digits (10 Hz to 100 Hz) | |||||
| 2.5% ±5 digits (100-500 Hz) | ||||||
| Crest Factor (50 Hz/60 Hz) | 3 @ 500 A | |||||
| 2.5 @ 600 A | ||||||
| Add 2% for C.F. >2 | ||||||
| AC Current via Flexible Current Probe | ||||||
| Range | 2500 A | |||||
| Resolution | 0.1 A (≤ 600 A) | |||||
| 1 A (≤ 2500 A) | ||||||
| Accuracy | 3% ±5 digits (5 – 500 Hz) | |||||
| Crest Factor (50/60Hz) | 3.0 at 1100 A | |||||
| 2.5 at 1400 A | ||||||
| 1.42 at 2500 A | ||||||
| Add 2% for C.F. > 2 | ||||||
 | ||||||
| i2500-10 Flex | i2500-18 Flex | i2500-36 Flex | ||||
| A | ||||||
| Distance from Optimum | 0.5 in (12.7 mm) | 1.4 in (35.6 mm) | 4.8 in (122.2 mm) | |||
| Error | ±0.5 % | ±0.5 % | ±0.5 % | |||
| B | ||||||
| Distance from Optimum | 0.8 in (20.3 mm) | 2.0 in (50.8 mm) | 5.3 in (133.6 mm) | |||
| Error | ±1.0 % | ±1.0 % | ±1.0 % | |||
| C | ||||||
| Distance from Optimum | 1.4 in (35.6 mm) | 2.5 in (63.5 mm) | 5.8 in (147.6 mm) | |||
| Error | ±2.0 % | ±2.0 % | ±2.0 % | |||
| Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range. | ||||||
| DC Current | ||||||
| Range | 999.9 A | |||||
| Resolution | 0.1 A | |||||
| Accuracy | 2% ±5 digits | |||||
| AC Voltage | ||||||
| Range | 1000 V | |||||
| Resolution | 0.1 V (≤600.0 V) | |||||
| 1 V (≤1000 V) | ||||||
| Accuracy | 1% ±5 digits (20 Hz to 500 Hz) | |||||
| DC Voltage | ||||||
| Range | 1000 V | |||||
| Resolution | 0.1 V (≤600.0 V) | |||||
| 1 V (≤1000 V) | ||||||
| Accuracy | 1% ±5 digits | |||||
| mV dc | ||||||
| Range | 500.0 mV | |||||
| Resolution | 0.1 mV | |||||
| Accuracy | 1% ±5 digits | |||||
| Frequency via Jaw | ||||||
| Range | 5.0 Hz to 500.0 Hz | |||||
| Resolution | 0.1 Hz | |||||
| Accuracy | 0.5% ±5 digits | |||||
| Trigger level | 5 Hz to 10 Hz, ≥10 A | |||||
| 10 Hz to 100 Hz, ≥5 A | ||||||
| 100 Hz to 500 Hz, ≥10 A | ||||||
| Frequency via Flexible Current Probe | ||||||
| Range | 5.0 Hz to 500.0 Hz | |||||
| Resolution | 0.1 Hz | |||||
| Accuracy | 0.5% ±5 digits | |||||
| Trigger level | 5 Hz to 20 Hz, ≥25 A | |||||
| 20 Hz to 100 Hz, ≥20 A | ||||||
| 100 Hz to 500 Hz, ≥25 A | ||||||
| Resistance | ||||||
| Range | 60 kΩ | |||||
| Resolution | 0.1 Ω (≤600 Ω) | |||||
| 1 Ω (≤6000 Ω) | ||||||
| 10 Ω (≤60 kΩ) | ||||||
| Accuracy | 1% ±5 digits | |||||
| Capacitance | ||||||
| Range | 1000 μF | |||||
| Resolution | 0.1 μF (≤ 100 μF) | |||||
| 1 μ F (≤ 1000 μF) | ||||||
| Accuracy | 1% ±4 digits | |||||
| Mechanical Specifications | ||||||
| Maximum voltage between any terminal and earth ground | 1000 V | |||||
| Batteries | 2 AA, NEDA 15A, IEC LR6 | |||||
| Operating temperature | -10 °C to +50 °C | |||||
| Storage temperature | -40 °C to +60 °C | |||||
| Operating humidity - non-condensing (< 10°C) | ≤90% RH (at 10 °C to 30 °C) | |||||
| ≤75% RH (at 30 °C to 40 °C) | ||||||
| ≤45% RH (at 40 °C to 50 °C) | ||||||
| Operating altitude | 2000 m | |||||
| Storage altitude | 12,000 m | |||||
| Size (L x W x H) | 249 x 85 x 45 mm | |||||
| Weight | 395 g | |||||
| Jaw opening | 34 mm | |||||
| Flexible current probe diameter | 7.5 mm | |||||
| Flexible current probe cable length (head to electronics connector) | 1.8 m | |||||
| Safety | IEC 61010-1, Pollution Degree 2 | |||||
| IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V | ||||||
| IEC 61010-2-033:CAT III 1000 V / CAT IV 600 V | ||||||
| IP rating | IEC 60529: IP30, non-operating | |||||
| Radio Frequency Certification FCC ID | T68-FBLE IC:6627A-FBLE | |||||
| Electromagnetic Compatibility (EMC) | ||||||
| International | IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 | |||||
| CISPR 11: Group 1, Class A | ||||||
| Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. | ||||||
| Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purpose. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. | ||||||
| Korea (KCC) | Class A Equipment (Industrial Broadcasting & Communication Equipment) | |||||
| Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. | ||||||
| USA (FCC) | 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. | |||||
| Temperature coefficients | Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C | |||||
Models: Fluke 376 FC True-RMS Clamp Meter with iFlex
Fluke 376 FC with 18-inch iFlex
Fluke 376 FC True-RMS Clamp Meter
UPC#: 0 95969 79839 6
Includes:
- Fluke 376 FC True-RMS Clamp Meter
- 18-inch iFlex® Flexible Current Probe
- TPAK magnetic hanging strap
- TL75 Test Leads
- Two AA batteries (Installed)
- Soft carrying case
- Coated instruction card
- Safety information sheet
Fluke 376 FC with 36-inch iFlex
Fluke 376 FC True-RMS Clamp Meter
Part#: 5278833UPC#: 1 95112 02098 2
Includes:
- Fluke 376 FC True-RMS Clamp Meter
- 36-inch iFlex® Flexible Current Probe
- TPAK magnetic hanging strap
- TL75 Test Leads
- Two AA batteries (Installed)
- Soft carrying case
- Coated instruction card
- Safety information sheet
Fluke 376 FC True-RMS Clamp Meter with iFlex is rated out of 5 by 49.
Rated 5 out of 5 by James Weaver from Never Again Will I Buy Another Meter. I Heard That The Fluke Amp Clamp Meter Was Good, I Never Expected it to be The Best I Ever Used!!! This is Awesome to Test a Amps on a Circuit Working Alone. Using Fluke Connect I Can Monitor The Amps Away From A Live Panel. Very Wonderful!!!
Date published: 2016-12-07
Rated 5 out of 5 by Hector22 from Excelente equipment I bought the Clamp Meter 376FC a couple of weeks ago, and the functionality and the fluke connection are amazing. I am very satisfied with the performance of the equipment.
Date published: 2016-12-07
Rated 5 out of 5 by JayW from Extremely Useful The 376 FC is an extremely useful meter. Having the choice between the amp clamp for smaller wires and the iFlex for larger or parallel conductors makes the meter very versatile. I also love the Wi-Fi Fluke Connect feature because I can set the meter up, connect to my mobile device and not only monitor from a safe distance but also record my readings. Once I have recorded my data I can then create a report that I can share immediately from my phone. I would definitely recommend this meter to anyone in the market for a new multi-meter. Thank you Fluke for another great product.
Date published: 2016-12-07
Rated 5 out of 5 by Twodogs541 from Remote montoring is great. Great upgrade from the clamp meter that I have been using for the past few years. The remote monitoring capabilities are fantastic.
Date published: 2016-12-07
Rated 5 out of 5 by SEaDInc from Upgraded from my 337 I was one of the first purchasers of the 376FC, and an early adopter of Fluke Connect. I'm a commercial and industrial electrician, and use this unit in troubleshooting and commissioning. The iFlex CT is great when troubleshooting load issues in large conductors and busbar.
Most recently I used the unit, in conjunction with Fluke Connect, to troubleshoot the controls on a hydraulic lift. Using Fluke Connect, I was able to connect my 376FC and monitor the DC voltage at the hydraulic valves. Fluke Connect allowed me to operate the controls from the two remote locations and still see in realtime the voltage the valves saw.
All in all, a great upgrade from my 337: all its features, with the addition of the iFlex and Fluke Connect.
Date published: 2016-10-29
Rated 5 out of 5 by jiml03 from Perfect meter This clamp meter is perfect in every way and the Fluke Connect feature just makes it that much better.
Date published: 2016-10-08
Rated 4 out of 5 by Lynn from Good meter, but I like the meter but, I didn't know it cost ongoing money to use the program on your phone. A fee every 6 months or 12 months.
Date published: 2016-03-27
Rated 5 out of 5 by James Weaver from Never Again Will I Buy Another Meter. I Heard That The Fluke Amp Clamp Meter Was Good, I Never Expected it to be The Best I Ever Used!!! This is Awesome to Test a Amps on a Circuit Working Alone. Using Fluke Connect I Can Monitor The Amps Away From A Live Panel. Very Wonderful!!!
Date published: 2016-12-07
Rated 5 out of 5 by Hector22 from Excelente equipment I bought the Clamp Meter 376FC a couple of weeks ago, and the functionality and the fluke connection are amazing. I am very satisfied with the performance of the equipment.
Date published: 2016-12-07
Rated 5 out of 5 by JayW from Extremely Useful The 376 FC is an extremely useful meter. Having the choice between the amp clamp for smaller wires and the iFlex for larger or parallel conductors makes the meter very versatile. I also love the Wi-Fi Fluke Connect feature because I can set the meter up, connect to my mobile device and not only monitor from a safe distance but also record my readings. Once I have recorded my data I can then create a report that I can share immediately from my phone. I would definitely recommend this meter to anyone in the market for a new multi-meter. Thank you Fluke for another great product.
Date published: 2016-12-07
Rated 5 out of 5 by Twodogs541 from Remote montoring is great. Great upgrade from the clamp meter that I have been using for the past few years. The remote monitoring capabilities are fantastic.
Date published: 2016-12-07
Rated 5 out of 5 by SEaDInc from Upgraded from my 337 I was one of the first purchasers of the 376FC, and an early adopter of Fluke Connect. I'm a commercial and industrial electrician, and use this unit in troubleshooting and commissioning. The iFlex CT is great when troubleshooting load issues in large conductors and busbar.
Most recently I used the unit, in conjunction with Fluke Connect, to troubleshoot the controls on a hydraulic lift. Using Fluke Connect, I was able to connect my 376FC and monitor the DC voltage at the hydraulic valves. Fluke Connect allowed me to operate the controls from the two remote locations and still see in realtime the voltage the valves saw.
All in all, a great upgrade from my 337: all its features, with the addition of the iFlex and Fluke Connect.
Date published: 2016-10-29
Rated 5 out of 5 by jiml03 from Perfect meter This clamp meter is perfect in every way and the Fluke Connect feature just makes it that much better.
Date published: 2016-10-08
Rated 4 out of 5 by Lynn from Good meter, but I like the meter but, I didn't know it cost ongoing money to use the program on your phone. A fee every 6 months or 12 months.
Date published: 2016-03-27