Fluke i410 AC/DC Current Clamp

  • Fluke I410 AC/DC Current Clamp | Fluke
  • Fluke I410 AC/DC Current Clamp | Fluke

Key features

  • Battery-powered Hall-effect probe measures 1A to 400 A
  • 1mV/Amp output guarantees easy reading on your meter
  • Take accurate current readings without breaking the circuit
  • Maximum conductor Ø 32 mm
  • CAT III 600 V safety rating
  • Also available with softcase for DMM and clamp (i410 kit)
  • One year warranty
Fluke i410 AC/DC Current Clamp is rated 3.7 out of 5 by 3.
  • y_2018, m_8, d_20, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_fluke-i410, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 74.74ms
  • REVIEWS, PRODUCT
Fluke online store

Product overview

The Fluke i410 AC/DC current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current. The Large clamp claw gives you access to difficult to reach areas. The kit includes a handy carrying case.

Models

Fluke i410

AC/DC Current Clamp

Specifications

Specifications
Measurement typeHall sensor
Nominal current range400 A, AC/DC
Continuous current range1 A - 400 A AC/DC
Maxium non-destructive current400 A
Lowest measureable current0.5 A
Basic accuracy3.5% + 0.5 A
(% reading + floorspec)
Useable frequencyDC - 3 kHz
Output level(s)1 mV/A
Zerro error adjustmemtYes
Safety Specifications
SafetyCAT III, 600 V
Maximum voltage600 V
Mechanical and General Specifications
Warranty1 year
Battery life9 V, 60 h
Maximum conductor diameter30 mm
2 x 25 mm
Output cable length1.6 m
Shrouded banana plugsYes

Resources

Compatible products

Rated 1 out of 5 by from Lack of resolution and reliability. Broke this sucker out to test current on an A/C heater line, should be reading between 1 and 4 Amps, nope, too low to measure. It's not like I wasn't using a Fluke 87 while I was taking the measurement. I placed our standard non contact on the same line and got the reading I was looking for. The i410 jumped at first when I hit the little green button (btw, that is stupid, give me a switch, I've only got so many hands) but immediately dropped to zero. Removed it, re-zeroed (it hadn't moved) and tried again, no dice. I seldom need to read in the range this thing might be accurate within. I'm starting to question Fluke's commitment to quality products and have half a mind to send this thing to AvE for a tear down of it. Gabbage. Going to put it in the art bin at work and see if I can't get hold of something a little less finicky with the resolution I need. Neat idea, don't know why more people don't know you can use the voltage settings on their meters, done it before, of course calibrating a loop of wire can be a pain in the dingus end. Giving this a 5/5 for reliability, it reliably told me nothing of use. Will not be purchasing more Fluke anyway.
Date published: 2018-06-14
Rated 5 out of 5 by from Great amp clamp great amp clamp only drawback is it doesn't read below 4 amps. But then again it's for higher measurements. I'm an industrial electrician. But I have had fun using it on Automobiles starters. Checking compression !
Date published: 2015-02-14
Rated 5 out of 5 by from Super great extension of my 87V Works really well as a power-logger on distribution-circuits, along with my beloved Fluke 87V
Date published: 2014-12-09
  • y_2018, m_8, d_20, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_fluke-i410, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 103.53ms
  • REVIEWS, PRODUCT