Fluke 323 True RMS Clamp Meter
Model#: Fluke 323Part#: 5065521UPC#: 0 95969 62374 2
Fluke 323 True RMS Clamp Meter is rated out of 5 by 37.
Key features
- Rugged, reliable basic True-RMS clamp meter for measuring current up to 400 A
- Measures AC current to 400 A
- Measures AC voltage and DC voltage to 600 V
- Provides True RMS AC voltage and current for accurate measurements on non-linear signals
- Measures resistance to 4 kΩ with continuity detection
In stock
$207.99
Product overview: Fluke 323 True RMS Clamp Meter
Fluke 323 True-RMS clamp meter delivers rugged reliable performance for general electrical troubleshooting
The Fluke 323 clamp meter is a good basic troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. It's designed to perform in the toughest environments and provide noise-free, reliable results, so you can trust it to help you confidently diagnose problems almost anywhere. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments.
The Fluke 323 comes with a two-year warranty and a soft carrying case.
Other useful features:
- Features slim, ergonomic design for measuring in tight cable compartments
- Presents measurements on a large, easy-to-read display
- Hold function captures a reading on the display
- Features a CAT III 600 V, CAT IV 300 V safety rating
- Comes with a two-year warranty and soft carrying case
What's in the box:
- 323 Clamp Meter
- (1 pair) Test leads
- Soft case
- Quick Reference Guide
Specifications: Fluke 323 True RMS Clamp Meter
| Specifications | ||
| AC current | Range | 400.0 A |
| Accuracy | 2% ± 5 digits (45 Hz to 65 Hz) 2.5% ± 5 digits (65 Hz to 400 Hz) | |
| DC current | Range | - |
| Accuracy | - | |
| AC voltage | Range | 600.0 V |
| Accuracy | 1.5% ± 5 digits | |
| DC voltage | Range | 600.0 V |
| Accuracy | 1.0% ± 5 digits | |
| Resistance | Range | 400.0 Ω/ 4000 Ω |
| Accuracy | 1.0% ± 5 digits | |
| Continuity | ≤ 70 Ω | |
| Capacitance | - | |
| Frequency | - | |
| AC response | True-RMS | |
| Backlight | - | |
| Data hold | Yes | |
| Contact temperature | - | |
| Min/Max | - | |
| Size | H x W x D (mm) | 207 x 75 x 34 |
| Max wire diameter | 30 mm (600 MCM) | |
| Weight | 265 g | |
| Category rating | CAT III 600 V CAT IV 300 V | |
| Warranty | Two-year | |
Models: Fluke 323 True RMS Clamp Meter
Fluke 323
Fluke 323 True RMS Clamp Meter
Part#: 5065521UPC#: 0 95969 62374 2
Includes:
- Test leads
- Soft case
- User's manual
Fluke 323 CAL
Fluke 323 True RMS Clamp Meter, with a tracable certificate of calibration with data from Fluke
Part#: 5160572UPC#: 0 95969 94683 4
Includes:
- Test leads
- Soft case
- User's manual
- A tracable certificate of calibration with data from Fluke
R-FLUKE-323
Fluke 323 True RMS Clamp Meter, fully reconditioned to original factory specifications. Includes Fluke's 2 year product warranty.
Part#: 4391103UPC#: 0 95969 68866 6
Is there any kind of warranty of Fluke 323. We have 2 and battery terminal broke on both.
For information about warranty terms, see https://www.fluke.com/en-us/support/warranties
Date published: 2024-08-21
Do my eyes deceive me? Looking over the specifications, this $200 meter has WORSE accuracy than a $40 Fluke 101? Why? How?
Accuracy comparisons are based on the functions you are looking for in a meter. For instance, the Fluke 101 can not measure amps but the Fluke 323 can read amps up to 400 AC.
Date published: 2024-10-14
Is the Fluke 323 comes pre-calibrated from factory?
Yes, the Fluke 323 True RMS Clamp Meter comes calibrated from the factory. If you require a traceable certification of calibration, you will need to request that service at the time of purchase.
Date published: 2024-10-14
Does the Fluke 323 measure resistance?
The Fluke 323 clamp meter measures resistance to 4 kΩ with continuity detection.
Date published: 2024-05-23
Does this amp-meter compensate when reading Pulse Width Modulation output from VFD's? if so what is the KHz range of it. IF not do you have a handheld meter that can measure amps accurately on amps like the Mark 5 series does on voltage.
The user manual shows it reads uf. Does it?
Rated 5 out of 5 by CBickmann from Excellent product! Using this in the field (in an HVAC capacity) has been wonderful and reliable, I would like to see some new innovations or products that utilize a smaller clamp that allows me to fit the device in tighter spaces, as measuring amperage in disconnects is a little cumbersome when line and load leads are tight. Otherwise it's a wonderful durable product that hasn't let me down.
Date published: 2018-06-04
Rated 5 out of 5 by hddrder1 from easy to use It is the second one we bought they are very good, I will definatellt get more as needed.
Date published: 2018-06-04
Rated 5 out of 5 by robcs from LIGHTWEIGHT, EASY TO USE This is one of the best instruments that I have owned. My dad started using these back in the 80's.
Date published: 2018-04-05
Rated 5 out of 5 by PaoliPaul from Great features with Fluke legendary quality. I have a couple Fluke meters, the first I purchased around 1983 and it still works great today so when I needed a clamp meter for a specialty job I went straight to Fluke and am still impressed
Date published: 2018-01-29
Rated 5 out of 5 by KSemenko from Best Meters on the market Ive used Fluke my entire career as a plumber/ Heating Tech, lost my original 322/116 purchased the HVAC kit 1000v aligator clips a couple of ticker pens
Date published: 2018-01-26
Rated 5 out of 5 by BGunner from Great clamp meter For the price of the meter and the durability, it is worth every penny. I wish it had more features like the higher dollar clamp meters but again, for the price you pay, you are still getting the best quality clamp meter on the market today! The clamp meter is made quality, accurate on readings and extremely durable.
Date published: 2018-01-21
Rated 5 out of 5 by Frank from Great product This is one of the best products for any maintenance field. It's a must have tool
Date published: 2017-11-22
Rated 5 out of 5 by jonhhy from Simple, rough, ressitent, practical ok, so we got some for the company, and we were alittle taken away of how well built these things are, really well built, a big bright display and the magnetic t clamp is great use, and the easy to use clamp
Date published: 2017-01-05