Đồng hồ vạn năng kỹ thuật số: khi vấn đề hoạt động của máy móc đóng vai trò quan trọng

Type-K thermocouple with standard shrouded banana jack, compatible with DMMs with temperature measurement functions.

Type-K thermocouple for general purpose applications, measurement range: -40 to 260 °C.

80PK-22 SureGrip Immersion Temperature Probe

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated baffle.

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Type-K thermocouple for surfaces in rugged environment, durable ribbon sensor, measurement range: -127 to 600°C.

Type-K thermocouple for flat or curved surfaces such as plates and rollers, measurement range: 0 to 260 °C.

The Fluke 80PK-8 Pipe Clamp Temperature Probe uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Buy Online Now.

The 80PR 60 probe expands the utility of your RTD non-contact infrared thermometer by allowing you to take contact temperature readings.

Compatible with Fluke DMMs, high accuracy and fast reading for low voltage (below 24 V AC, 60 V DC) applications.

Converts a DMM to a thermometer, for use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC).

Safety designed female BNC to shielded banana adapter for use with Fluke ScopeMeter 120 Series and Fluke-43B Power Quality Analyzer

Tough polyprophylene case.

The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store and protect what you need to carry with you.

Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.

Includes adjustable padded space with a moveable divider for protection of two test tools, such as a digital multi-meter and a current probe.

C125 Meter Case

Zippered carrying case with inside pockets and belt loop

Get the right case for your Fluke tools.

Heavy duty case with carrying handle and accessories storage compartment.

Protect your meter and conveniently carry it from one job to the next with this handy carrying case.Buy Online Now.

Designed especially for the new Fluke 287 and 289 DMMs.

Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool.

Zippered carrying case with inside pocket belt loop and inside meter strap.

Zippered carrying case.

Zippered carrying case with detachable external pouch

Tough polyprophylene case. Accessories and manual compartments. Detachable lid. One year warranty.

Vỏ đựng được trang bị khóa kéo với túi nhỏ bên trong và dây đai cuộn tròn qua bộ gá.

Get the right case for your Fluke tools. The CAMO-37 camouflage carrying case is a zippered carrying case with durable high quality polyester exterior. It has a belt loop and an inner pocket to store test leads or small accessories. It is available in a trendy camouflage design with a 1 year warranty.

Get the right case for your Fluke tools. The CAMO-C25 camouflage carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke’s popular digital multimeters. It is available in a trendy camouflage design with a 1 year warranty.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

FlukeView Forms Software with cable

The Fluke Fiber Optic Meter (FOM) helps you test and maintain fiber optic cable without having to buy a whole new meter.

FOS-850 Fiber Optic Light Source allows you to test different cable lengths.

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. Buy Online Now.

Extend the current ranges of multimeters with a single range 200 A clamp-on AC Current Clamp with safety shrouded banana plugs. Buy Online Now.

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Small sized AC current clamp Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter.

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.

This AC current clamp with BNC output extends the functionality of portable oscilloscopes or power quality meters to measure up to 400 A AC. Buy Online Now.

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current.

Small, rugged light easily attaches to any Fluke test probe, bright white LED illuminates contact area, frees both hands for work.

Rugged, high intensity Xenon worklight allows you to work with both hands.

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need.

Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited Edition Fluke Collector's Cap.

MeterCleaner Wipes are pre-moistened with an industrial strength cleaning formula that removes surface dirt, oil, and grease from your test tools.

OC4USB USB interface cable

Dual Banana Plug 4 mm male to female BNC Adapter. The set consists of two adapters.

Provides RPM readings.

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with adjustable length test tips. Test leads as tough as your meter.

TL40 Retractable Tip Test Lead Set

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold resistant.

PVC insulated test leads with right-angle shrouded banana plugs. Recommended for general purpose measurements.

One pair (red, black) silicone test leads with right angle shrouded 4 mm (0.16 in) banana plugs.

An absolute must-have for work on Asian or European vehicles. This collection of male and female adapters allows you to make firm connection to pin and socket connectors.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire.

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire.

FlukeView® SW160 for MultiFunction Counter

Protect your meter and conveniently carry it from one job to the next with this handy carrying case. Buy Online Now.

Expand the battery life of your Fluke 189 or Fluke 187 up to 450 hours. This battery life gives you the chance to log data continuously for over two weeks.

Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs, measurement range and accuracy: probe dependent, suitable for low voltage applications(below 30 V AC, 60 V DC).

Designed to easily connect your DMM to a BNC patch cord. Use this adapter when connecting accessories that have a male BNC output.

CNX C3002 Modular DMM 2-Compartment Soft CaseCompatible with Fluke CNX Wireless Multimeter Inner pocket and carrying handle

CNX C3003 Modular 3-Compartment Soft Case Compatible with Fluke CNX wireless modules and meters Three adjustable compartments, inner pocket, and carrying handle

A variety of light sources allow you to test different cable lengths.

Now 80 Series owners can benefit from the Fluke Magnetic Hanging System. The easy-to-clean, snap-on holster absorbs shocks and protects your DMM, and is especially designed to hang from just about any metal surface.

Fluke i3000 Flex AC Current Clamp, 4 Pack

PAC 91 Printer Adapter Cable

TL910 Electronic Test Probe Set

Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector conductors.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.

Đầu nối cáp quang tiếp xuyên BNC có đầu cắm sang BNC có lỗ cắm Bao gồm bộ 2 thành phần, 50Ohm, 1000V CAT III, Max Power 1W

700TC2 Thermocouple Plug Kit700TC2

The 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger sized 80PK-10 pipe clamp, to give you a full range of measurement sizes.

Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.

Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.

L210 probe light + probe extenders. Includes L200 probe light and TP280 test probe extenders

Special value combo pairs the new L200 Probe Light with one of the most popular test leads by Fluke and a handy carrying case.

Foldable soft pouch with six pockets and hook-and-loop.

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more.

Complete set of test and measurement accessories designed especially for automotive specialists.