Dụng cụ HVAC

The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure connections to clamp and screw type terminal blocks.

Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs, measurement range and accuracy: probe dependent, suitable for low voltage applications(below 30 V AC, 60 V DC).

Type-K thermocouple with standard shrouded banana jack, compatible with DMMs with temperature measurement functions.

Isothermal screw terminal for J wire, suitable for up to 20 gauge thermocouple wire.

Isothermal screw terminal for K wire, suitable for up to 20 gauge thermocouple wire.

The 80K-15 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I.

The 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I.

The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I.

Type-K thermocouple for general purpose applications, measurement range: -40 to 260 °C.

Designed for hands free measurement of HVAC temperature measuring applications, use multiple and leave in place for route based routine maintenance.

80PK-22 SureGrip Immersion Temperature Probe

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated baffle.

Type-K thermocouple suitable for food industry, liquids and gels, measurement range : -40 to 260 °C.

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Type-K thermocouple for surfaces in rugged environment, durable ribbon sensor, measurement range: -127 to 600°C.

80PK-9 General Purpose Probe

The 80PR 60 probe expands the utility of your RTD non-contact infrared thermometer by allowing you to take contact temperature readings.

The 85RF High Frequency Probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100 kHz to 500 Mhz) RF voltmeter.

Set of three safety designed insulated Probe Tip Alligator Clips.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Single probe pierces 0.25 to 1.5 mm insulated wire.

AS200-G Probe Accessory Set, Grey

AS200-R Probe Accessory Set, Red

Tough polyprophylene case.

The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store and protect what you need to carry with you.

Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.

C125 Meter Case

Zippered carrying case with durable vinyl exterior, has belt loop and an inner pocket to store test leads or small accessories.

Zippered carrying case with durable vinyl exterior.

Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool.

Zippered carrying case with inside pocket belt loop and inside meter strap.

Oiled genuine top grain cowhide, rugged construction with heavy duty stitching and reinforced rivets, large tool belt loop and top flap to secure meter.

Tough polyprophylene case. Accessories and manual compartments. Detachable lid. One year warranty.

Vỏ đựng được trang bị khóa kéo với túi nhỏ bên trong và dây đai cuộn tròn qua bộ gá.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

FlukeView Forms Software with cable

Fabric holster absorbs shocks and protects meter from rough handling, built-in pocket for lead storage, convenient belt-loop with snap.

Durable nylon construction protects your thermometer while keeping it within reach, cuff hook attachment closure provide quick access and a secure closure.

Now 80 Series owners can benefit from the Fluke Magnetic Hanging System. The easy-to-clean, snap-on holster absorbs shocks and protects your DMM, and is especially designed to hang from just about any metal surface.

Heavy duty construction with mounting holes

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.

Small, rugged light easily attaches to any Fluke test probe, bright white LED illuminates contact area, frees both hands for work.

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need.

Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited Edition Fluke Collector's Cap.

PM9094/101 Mini Testhook Set for PM8918 series probes

RS200 Probe-accessories Replacement Set

SW90W FlukeView ScopeMeter Software (full version)

T5-RLS, Replacement Test Leads For Fluke T5-1000 or T5-600 Voltage, Continuity and Current Testers

TL1550B Test Leads with Alligator Clips (Red, Black, Green)

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with adjustable length test tips. Test leads as tough as your meter.

Bộ que đo với que đo này hoạt động trong nhiều ứng dụng điện. Tính năng SureGrip™ được thiết kế để bạn cảm thấy thoải mái khi thực hiện công việc của mình.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Includes 3 test lead accessories in an all-in-one set. Ideal starter kit for electrical applications.

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

Bộ phụ kiện được thiết kế đặc biệt để làm việc trong các môi trường năng lượng cao.

5 cách kết nối

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

Large jaws, long leads and a piercing needle inside the jaws.

TL40 Retractable Tip Test Lead Set

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold resistant.

PVC insulated test leads with right-angle shrouded banana plugs. Recommended for general purpose measurements.

One pair (red, black) silicone test leads with right angle shrouded 4 mm (0.16 in) banana plugs.

TL910 Electronic Test Probe Set

3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.

Handy all-in-one kit that includes 3 Test Lead Sets.

TLK-220 EUR SureGrip Industrial Test Lead Kit

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224 test leads.

Ideal for electronics test and design, this master set includes 11 items in a handy pouch.

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in different environments. Buy Online Now.

Set includes three Flexible Socket Probes and a Large Alligator Clip.

Provides firm and secure contact.

Test lead replacement set for the 430 Series Power Quality Analyzer.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

Slim probe with test button keeps your eyes on the panel while probing hard to reach points.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector conductors.

Recommended for use with TL222 and TL224

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire.

Replacement tips for TL910.

Set of push-on adapters for TL71 and TL75 test probes.

Hang your meter in a variety of ways for convenient hands-free operation. Attaches to most Fluke meters. Buy Online Now.

TPS VOLTPROBE 1 KV

TPS VOLTPROBE 10 V

TPS VOLTPROBE 100 V

TPS VOLTPROBE 400 V

TPS VOLTPROBE 600 V

TPS VOLTPROBE 750 V

Đầu nối cáp quang tiếp xuyên BNC có đầu cắm sang BNC có lỗ cắm Bao gồm bộ 2 thành phần, 50Ohm, 1000V CAT III, Max Power 1W

Double insulated voltage probe for ScopeMeter 190 series.

Double insulated voltage probe for ScopeMeter 190 series. Each probe set includes:600 V CAT III / 1000 V CAT II rated 10:1 Voltage

Double insulated voltage probe for ScopeMeter 190 series

Double insulated voltage probe for ScopeMeter 190 series.

Double insulated voltage probe for ScopeMeter 190 series.

VPS220-G - Voltage Probe Set, 100:1, one grey

VPS220-R – Voltage Probe Set, 100:1, one red

WC100 Color Localization Set

When your job depends on every tool in your toolbox, Fluke test leads keep you working. Plated test lead tips stay sharp and accurate.

700TC2 Thermocouple Plug Kit700TC2

Extending and repairing J-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

Extending and repairing K-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

Extending and repairing T-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

BP980 Double Banana Plug Kit

Draw flue gas samples up to 700ºF (370ºC) reliably for measurement with the Fluke CO-210 Carbon Monoxide probe or Fluke CO-220 Carbon Monoxide meter.

Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.

Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.

L210 probe light + probe extenders. Includes L200 probe light and TP280 test probe extenders

Special value combo pairs the new L200 Probe Light with one of the most popular test leads by Fluke and a handy carrying case.

Foldable soft pouch with six pockets and hook-and-loop.

Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized.

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more.