Kết quả tìm kiếm

The Fluke 700SC is used to communicate with the Fluke 726, the Fluke 754, and the Fluke Calibration 3130. It allows you to connect these products to a PC. It also can connect a Fluke Calibration dry-well with a 754.

Temperature sensor calibration software from Fluke Calibration is Windows based, easy to use, and automates data collection and report generation for temperature calibration laboratories.

Designed for use on the 525B and 7526A Temperature/Pressure Calibrator; also suitable for the 5520A Multi-Product Calibrator

The 6003A Three Phase Electrical Power Calibrator from Fluke Calibration offers compact, accurate three-phase power in a single, easy-to-use instrument.

Trend Link V10 is a trend display program that works with the Full version of FlukeDAQ 6.0 (2680A-APSW) collecting and displaying data from any combination of Fluke Data Acquisition products.

The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.

5522A is a resistance calibrator that calibrates a wide variety of electrical test equipment, provides reverse power protection and is remarkably affordable.

The 5502A Multi-Product Calibrator is the ideal electrical calibrator for metrology professionals who calibrate low-to-medium accuracy electrical instruments

An accurate & economical solution if you need to calibrate digital multimeters, clamps, thermometers & other electronic test instruments. Learn more.

5320A multifunction DC calibrator is an accurate, flexible instrument that allows you to calibrate many different models of electrical testers efficiently.

5700A/EP from Fluke Calibration is an upgrade service that extends both the performance & service life of your existing 5700A Multifunction Calibrator.

5500A multi-product calibrator can accurately calibrate digital & analog multimeters, thermometers, wattmeters, data loggers & many other measurement tools.

Fluke Calibration 5080 / CAL calibration software for 5080A multi-product calibrator can quickly calibrate a wide range of analog & digital workload accurately.

Achieve precise calibration for oscilloscopes up to 4GHz with the Fluke 9500C. Features Active Head Technology™ for efficient, automated multi-channel calibration.

The 27 GHz Fluke Calibration 96270A RF Reference Source is the simplest, most accurate and cost effective single instrument for calibrating spectrum analyzers and RF power sensors and more.

The Fluke Calibration 96040A RF Reference Source enables you to simplify your RF calibration system by replacing many of the instruments and accessories that make up your current system.

The Fluke Calibration 9118A Thermocouple Calibration Furnace is a horizontal, open-ended tube furnace with a temperature range of 300 °C to 1200 °C.

5080A Multi-Product Calibrator calibrates digital & analog meters up to 800 mA for ac/dc voltage & voltage up to 50 V for ac/dc current. Request a quote today!

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

The 5790B AC Measurement Standard is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

Fluke Calibration 5960A calculates argon triple point using a reproducible process, produces a 30-hour temperature plateau & increases SPRT calibration efficiency.

Fluke Calibration 52120A Transconductance Amplifier supplies dc currents up to 100 amps & ac currents up to 120 amps, with accuracies up to 140 ppm.

Integrate MET/CAL® Calibration Management Software to your workflow with MET/CONNECT™ Calibration Integration Software. Flexibility achieved.

Fluke can help you migrate calibration data from your old database to a new MET/CAL® Plus database. Learn more at our Database Migration Assistance page.

The Fluke Calibration model 2468 Pitot Static Primary Standard is specifically designed for calibrating today's high performance flight line and Air Data Test Systems.

The PG9607 piston gauge from Fluke Calibration is the next generation of absolute pressure piston gauge. It supports the use of a 100 kg mass set to define gauge and absolute pressures from 11 to 500 kPa with a single piston-cylinder.

Fluke Calibration's PG7302™ Piston Gauge line features reference level pressure standards offering a unified solution from vacuum to 500 MPa.

The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.

MET/SUPPORT Gold is an annual membership program offering premium support and services to help you stay as productive as possible.

Custom systems integrate standard Fluke Calibration products into a complete system based on the user’s specific requirements.

MET/CAL is the complete solution for automating and managing your calibration workload more efficiently & consistently.

ITS-90 fixed-point cells from Fluke Calibration is constructed in ultra clean labs, using high-density, high-purity graphite crucibles containing metal samples with purity of at least 99.9999 %.

The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.

6105A and 6100B electrical power calibrator from Fluke Calibration has high accuracy for calibrating secondary standard energy meters & type test applications.

MET/TEAM™ is calibration management software or test equipment asset management software for managing your assets & is powerful, flexible & scalable. By Fluke Calibration.

MET/TEMP II software enables you to easily automate the calibration for a wide range of temperature sensors.

Thiết bị thao tác nhanh nhất bằng một tay dành để kiểm tra mạch mA.

Đồng hồ vạn năng số  xác lập tiêu chuẩn mới trong hoạt động trong điều kiện khắc nghiệt với các tính năng và độ chính xác nhằm khắc phục hầu hết các sự cố điện

Fluke DAQ is a powerful configuration and application software that drives the NetDAQ and 2680 Series data acquisition products.

COMPASS® for Pressure Calibration Software is a universal platform for all of your pressure calibration software needs.

Connect the instrument to an available RS-232 port and start the IO Toolkit software.

Fluke Calibration GB gas booster supplies clean, stable pressure up to 15 000 psi for piston gauges. Compact, easy to use, keeps your lab productive

9500B oscilloscope calibrator from Fluke Calibration is fully automated, accurate & can deliver 6.0 GHz leveled sine waves & pulse edges of only 70 ps.

MET/CONNECT v 2.2.0 with MET/CAL v 11.1.0 (2.1 GB)   Document(s): MET/CONNECT 2.2.0 ReadMe (154.98 KB) MET/CAL 11.1.0 ReadMe (450.51 KB) MET/CONNECT Installation Guide (722.31 KB) MET/CONNECT API Reference (825.91 KB) Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.2.0 and MET/CAL version 11.1.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

Fluke Calibration has software solutions for virtually every measurement discipline. Designed by measurement experts, these programs increase your productivity while strengthening your quality program and leaving a smile on your auditor's face.

Annual global event highlights why measurement matters in everyday lifeEverett, Wash., May 20, 2013 – On May 20th, scientists and organizations dedicated to metrology celebrate World Metrology Day, which commemorates the signing of the international treaty to coordinate weights and measures activities and support the development of the metric system. Fluke Corporation recognizes World Metrology Day as a time to appreciate the scientists in national laboratories throughout the world who dedicate...

PPC2-AF v1.01e Embedded Software (222.5 KB)TITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFTITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFInstructions:Do Not use with PPC2+!This software revision affects only the PPC2-AF on-board routines for calibration of the PPC2-AF's RPTs. It has no effect on regular operation. This new release is recommended for all PPC2-AF units, in particular those on which difficulty with calibration of the Lo Reference Pressure Transducer has been encountered. The FCAL...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PG7000/PG9000 Ver 3.1.5.255 Embedded Software (.bin)TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.Instructions:The PG7000/PG9000 firmware versions 3.00 and newer are intended to work with all PG9000 models and PG7000 models with serial numbers 733 or newer. Do not attempt to upgrade an older PG7000 model with this software. This upgrade does not...

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

PG7000 Ver 1.05f Embedded Software (.bin)TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:Download the file. Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating...

PPCK+ v1.00m Embedded Software (.bin)TITLEVERUSE WITHPPCK+™1.00m2005.01.05PPCK+Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

96270A RF Reference Source Firmware Upgrade (.ldr)Serial Number RangeBackward CompatibilityDateFirmware RevisionExplanationsAllAll previous versions 96270AApril 2, 2019V1.13Extend capability of previous 96270A models to accept Rohde & Schwarz NRPxxT power sensors.Full list of all sensors recognised by 96270 with install firmware V1.13 installed:Older NRP-Z51, NRP-Z52, NRP-Z55, NRP-Z56, NRP-Z57and NRP-Z58Now extended to include:New: NRP18T, NRP18TN, NRP33T, NRP33TN, NRP40T, NRP40TN, NRP50T, NRP50TN,...

WinFlash Free Utility (.exe)Additional Downloads: WinFlash64™ 2.20 (64bit OS) (.exe)PC BasedFree Utilities - WinFlash™TITLEVERUSE WITHWinFlash™2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTWinFlash64™(64bit OS)2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTDescriptionFirmware upgrade utility. This program...

Crystal Reports 2020 (.exe)For the product key to use with your Crystal Reports Editor installation for MET/TEAM, contact softwaresupport@flukecal.com. Include a screen capture of your MET/TEAM Help>About screen. Instructions are here: https://my.fluke.com/en-us/article/KA-03961.This is the Crystal Reports to be used with MET/TEAM software (not MET/BASE) for editing Reports. Service Pack 2 Patch 5If you are currently using Crystal Reports Editor 2013, you should:Uninstall Crystal Reports 2013Reboot...

Crystal Reports 2013 (.iso)For the product key to use with your Crystal Reports Editor installation for MET/TEAM, contact softwaresupport@flukecal.com. Include the version you are using in your email.This is the Crystal Reports to be used with MET/TEAM software (not MET/BASE).Special instructionsClick on the link to download the software.MDS check sum:395a1705f0c23770ea5514580313bc4

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

LabVIEW driver for PPC3 and PPCH (.exe)Additional Downloads:LabVIEW driver for PPC2+ and PPCK+ (.exe)LabVIEW driver for PPC2 and PPCK (.exe)LabVIEW driver for RPM3 (.exe)LabVIEW driver for RPM4 (.exe)LabVIEW driver for molbox (.exe)LabVIEW driver for molbox RFM (.exe)LabView® drivers for Pressure ProductsUSE WITHVERDOWNLOADPPC3™DescriptionLabView is a registered trademark of National Instruments Corp.Instructions:As noted by the table, some of the LabView Drivers support more than one product....

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

National Instruments LabView® driver for Fluke data acquisition instruments (.zip)This driver is compatible with these Fluke data acquisition products:2680 Series Data Acquisition Systems2640A NetDAQ Data Acquisition Unit2645A NetDAQ Data Acquisition Unit

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

96270A/96040 Firmware Update (.exe)Documents:96xxx Firmware Release Notes (.doc)96xxx Firmware Upgrade Instructions (.pdf)96270A/96040A RF Reference Source Firmware UpgradeDownload instructions and a list of firmware revision history, new features and resolved issues for the upgrade versions are documented at the link above. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

Fluke DPC/Track2 60-Day Trial (.exe)Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke handheld’s documenting features.Using a labor-intensive, manual pen-and-paper system steals valuable resources and wastes time. And there’s also a high probability for measurement errors.With DPCTrack2, calibration time drops by 50% or more. Work assignments and calibration results...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

CalTool for Analog Free Utility (.exe)TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.00TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.002003.01.27molbox1 (w/MFC option installed) & MFC-CBHelp File IncludedInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionCalTool™ for Analog is used to calibrate the analog circuits of molbox1 and MFC-CB. CalTool for Analog is PC based application that assists in the calibration...

5320A Firmware Upgrade (.zip)Additional Downloads:5320A Uploader (.zip)5320A Multifunction Electrical Tester Calibrator Firmware UpgradeGeneral description5320A firmware upgrade ver. (3.43-1.34-2.43-1.01---2-9-2015) solves an issue in RCD trip current function and adds information lines to substitute leakage current screen.New features and enhancements1. Firmware“Substitute leakage current” function contains additional information on screen:Added line Rsubst with value of resistance connected...

6003A Firmware Update (.zip)TITLEUSE WITH6003AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBInstallationPut the CD into the computer, wait for autorun and select “Software installation” and “Uploader” or start direct “install\freeware\uploader”.Uninstall...

2271A Embedded Software, Update by USB (zip)TITLEUSE WITH2271A2271AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 2271ABegin by clicking on the Get software button. Then download the zip file by clicking the 2271A v10x USB.zip...

52120A Transconductance Amplifier Firmware Upgrade (.zip)Documents:52120A Firmware Release Notes (.doc)The latest firmware upgrade for the 52120A Transconductance Amplifier is now available. Read the firmware installation instructions before proceeding with upgrade. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have previously registered your 52120A.Firmware installer software...

4322 v1.4.3.27 Embedded Software (.bin)TITLEVERUSE WITH4322v1.4.3.272015.12.014322TITLEVERUSE WITH4322v1.4.3.272015.12.014322Instructions:Download the file by clicking on "4322 v1.4.3.27 Embedded Software".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a standard RS232 cable to the COM1 port of the 4322.The updating of embedded software should only be performed after...

2680A-904 Trend Link v10, 14 day Demo Download (.zip)Version 10.0Posted April 6, 2015File size: 61.6 MBDescriptionThis is a full-featured Fluke version of Trend Link (2680A-904) by Canary Labs for use with Fluke DAQ V6.0 (2680A-APSW) for use with data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A).This is a 14 calendar-day demonstration program. The download includes the application, user guide (English) and product training tutorial by Canary Labs under...

2638A Firmware (.zip)TITLEUSE WITH2638A 1.06.01 Firmware2638ATITLE2638A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Changed default Auto Record from OFF to ON, instrument will by default record data.Default measurement rate...

1586A Firmware (.zip)TITLEUSE WITH1586A 1.06.01 Firmware1586ATITLE1586A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Corrects an issue with user defined Alarm and Timestamp configuration getting lost.Note: Users of 2680A-APSW...

8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator »  LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator » 7250 Series Pressure Controller/Calibrator » 7615 Hydraulic Pressure Controller/Calibrator » 7750i Air Data Test Set » molbox1+ Mass Flow Terminal » PPC4 Pressure Controller/Calibrator » PPCH Hydraulic Pressure Controller/Calibrator » RPM4 Reference Pressure...

6105A/6100B Electrical Power Standards Firmware Upgrade (.zip)Documents:6105A/6100B firmware Change History and Installation Instructions (.doc)6105A/6100B Electrical Power Standards Firmware UpgradeThis firmware upgrade is suitable for all 6105A and 6100B units that have 2.xx or 4.xx firmware fitted.Note this firmware upgrade is NOT suitable for the 6105A/610B that currently has 1.xx or 3.xx firmware loaded. This upgrade can only be done at a service center.Note this firmware upgrade is NOT suitable...

PPC2+ v2.02f Embedded Software (.bin)TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+Instructions:Do Not use with PPC2-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your Fluke 700HPPK/700HPM. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have any questions, please do not hesitate to contact us. https://www.fluke.com/en-us/support/technical-support

Unit of Measure Converter Free Utility (.exe)TITLEVERUSE WITH Unit of Measure Converter Free Utility2.01a2006.08.15All Products Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe Unit of Measure Converter is a free ActiveX control distributed by Fluke Calibration. This program can be run stand alone or built into other applications. Use the [Show Help] menu choice for details on using this tool.Warning - Fluke Calibration has made...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...