Fluke Networks CableIQ™ Qualification Tester

Model#: CIQ-100 Part#: 2097251 UPC#: 7 54082 02260 2
Fluke Networks CableIQ™ Qualification Tester is rated 3.7 out of 5 by 3.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 24.82ms
  • Fluke Networks CableIQ™ Qualification Tester
  • Fluke Networks CableIQ™ Qualification Tester
  • Fluke Networks CableIQ™ Qualification Tester
  • Fluke Networks CableIQ™ Qualification Tester
  • Fluke Networks CableIQ™ Qualification Tester

Key features

Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP)

  • Works on live networks to provide Ethernet switch detection and device configuration
  • Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
This product is discontinued or reclassified

Product overview: Fluke Networks CableIQ™ Qualification Tester

CableIQ finds common cable faults and data rate. Cables often fail in harsh industrial environments where cables are exposed to vibration, extreme flexing, moisture, expansion and contraction from temperature change. Failures result in costly production downtime so it’s important to quickly identify where the cable is broken so it can be replaced or repaired. CableIQ checks continuity on all wires displays results graphically so you can see opens, shorts, and cross wires and reports the distance to an open connection within the cable. It also checks if the cable can support data rates.


Troubleshoot and qualify Ethernet network cabling speed

  • Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
  • Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
  • Tests all copper cabling media: twisted-pair, coax, and audio
  • Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
  • Qualifies and troubleshoots Industrial Ethernet cabling

Specifications: Fluke Networks CableIQ™ Qualification Tester

Cable types supportedUTP, STP, FTP, SSTP, RG6, RG59, audio and security
Qualification autotests1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported testsWiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
WiremapCan detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Find faultMeasures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results storageUp to 250 qualification test results
PowerBattery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life20 hours of typical use, without backlight
Other battery types supported4AA photo lithium, NIHM, NICAD
Dimensions and weight7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)

Models: Fluke Networks CableIQ™ Qualification Tester

CableIQ Qualification Tester
Part#: 2097251
UPC#: 7 54082 02260 2


  • CableIQ with remote adapter
  • CableIQ Reporter software CD
  • (2) RJ45-RJ45 patch cord
  • USB cable
  • Coax 'F' push-on adapter
  • Owner's CD and quick start guide
  • (4) AA batteries
  • Soft carry case

Does the Fluke Networks CIQ-100 Cable Tester come with a Calibration Certificate?

Asked by: Sean61
The CableIQ does not require calibration, so there are no calibration certificates for the CableIQ.
Answered by: Fluke Staff
Date published: 2023-05-01
  • y_2024, m_2, d_28, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_3786408099892, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 118.36ms
Rated 5 out of 5 by from A Simpler Life I used this with the last company I worked with and was terrific! Made wire locating easier, tested every wire for correct patterns and faulty roles. The length reading was always CORRECT! which made some jobs easier.
Date published: 2022-11-24
Rated 1 out of 5 by from Screen broke on day two. Be extra careful. There is only a thin plastic sheet protecting the screen. The screen broke and now I can't use it. Good quality for junk.
Date published: 2022-07-20
Rated 5 out of 5 by from Makes my life easier my company provided one of these for me to use in the field. saves me loads of time.
Date published: 2020-11-19
  • y_2024, m_2, d_27, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_3786408099892, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.98ms
Please enable cookies to view product reviews.
Welcome to Fluke's Chat GPT Assistant. As with other generative AI systems, this chatbot may occasionally generate incorrect information. For questions regarding the safe use of Fluke tools, please refer to your owners manual. You must comply with your employer’s safety standards and obtain necessary training before using Fluke tools or taking electrical measurements. To speak with a person, visit our Contact Us page.
How can I help you today?