English

Fluke Networks LinkIQ™ Cable+Network Tester

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 25.31ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke Networks LinkIQ™ Cable+Network Tester
  • Fluke Networks LinkIQ™ Cable+Network Tester
  • Fluke Networks LinkIQ™ Cable+Network Tester
  • Fluke Networks LinkIQ™ Cable+Network Tester
  • Fluke Networks LinkIQ™ Cable+Network Tester

Key features

  • Validate Cable Performance up to 10GBASE-T via frequency-based measurements
  • Get connected switch data rate, switch name, port number, and VLAN
  • Detect the PoE class (1-8) and power, and perform a load test
  • Perform cable diagnostics including length
  • Manage results and print reports from LinkWare™ PC
In stock
$1,995.00
Free shipping over $50
30-day Returns

Product overview: Fluke Networks LinkIQ™ Cable+Network Tester

The LinkIQ™ Cable+Network Tester is the trusted solution to verify cable performance up to 10G and solve network connectivity problems.

LinkIQ™ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements.

LinkIQ™ also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W).

Additional features include: Cable Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results via LinkWare PC.

Includes LinkIQ™ Main Unit, Remote ID #1, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, and carrying case.

Specifications: Fluke Networks LinkIQ™ Cable+Network Tester

FeatureDescription
Languages supported in UIEnglish (SW v1.0)
Weight1 lbs 6 oz (624g)
BatteryType: Lithium-ion, 3.6 V, 6400 mAh
Life: 8 hours typical
Charge time: 4.5 hours
Charging temperature range: 0 °C to +40 °C
Power AdapterInput: 100 to 240 VAC ±10%, 50/60Hz
Output: 15 VDC, 2 A maximum
Class II
Host InterfaceUSB type C
Display800 x 480 color capacitive multi-touch
Dimensions8.5 in x 4.5 in
Operating Temperature0°C to 45°C
Storage Temperature-10°C to +60°C
Operating Relative Humidity0 % to 90 %, 0°C to 35°C
0 % to 70 %, 35°C to 45°C
Operating Altitude4,000 m
3,200 m with ac adapter
VibrationRandom, 2 g, 5 Hz-500 Hz
Drop1 m drop, 6 sides
 

Active Network Diagnostics

FeatureDescription
Diagnostic ProtocolsLink Layer Discovery Protocol (LLDP)
Cisco Discovery Protocol (CDP)
Fast Link Pulses (FLP)
Nearest Device Diagnostics
(If available through diagnostic protocols)
Switch Name
Port Number
VLAN Name
Advertised Data Rates
Advertised Duplex
Power Over Ethernet CompatibilityIEEE 802.3af/at (SW v1.0)
  Hardware negotiation with signature resistance
  Software negotiation with LLDP/CDP
Power Over Ethernet DiagnosticsAdvertised Power Class (1 to 4) (SW v1.0)
Advertised Available Power
Powered Pairs
Diagnostics for both Single and Dual signatures
Power Over Ethernet MeasurementsLoaded Voltage (V)
Loaded Power (W)
Port BlinkBlink the light of the connected port
 

Cable Test Specifications

FeatureDescription
Test PortShielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs.
Commissioning Autotests10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only.
Test Speed: 6 seconds for lengths < 70 m
Cable TypesBalanced twisted-pair cabling
Unshielded twisted-pair
Screened twisted-pair
2-pair and/or 4-pair
Wire Map-Only TestsDocument wire map
Length of each pair
Diagnose split pairs
User selectable T568A or T568B
User selectable crossover settings (Straight through, Half-crossover, Full-crossover)
Test speed: 1 second for lengths < 120 m
Length (Maximum)305 m (1000 ft)
Nominal Velocity of Propagation (NVP)User settable
Tone GeneratorGenerates digital tones compatible with Fluke Networks IntelliTone probe.
Generates analogy tones compatible with general analog probes.
Remote ID LocatorsUse remote ID terminations to identify up to 7 unique ports or office outlets

Models: Fluke Networks LinkIQ™ Cable+Network Tester

LIQ-100

LIQ-100 LinkIQ Cable+Network Tester

Includes:

  • LinkIQ™ Main Unit
  • Remote ID #1
  • RJ45-RJ45 patch cord
  • AC charger
  • RJ45/11 universal coupler
  • Carrying case

Reviews: Fluke Networks LinkIQ™ Cable+Network Tester

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 37.49ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;