Fluke 805 Vibration Meter
Model#: Fluke 805 Part#: 4094385 UPC#: 0 95969 61069 8
Fluke 805 Vibration Meter is rated out of 5 by 11.
Key features
- Reliable, repeatable, accurate device for checking bearings and overall vibration
- Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
- Provides consistent data quality at both low and high frequency ranges
- Offers four-level severity scale to assess urgency of problems and bearing condition
Product overview: Fluke 805 Vibration Meter
The Reliable, Repeatable, Accurate Way to Check Bearings and Overall Vibration
Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.
What Makes the 805 the Best Choice?
- A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture
- A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings
- A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable)
- Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types
- Straight-forward user interface that minimizes the user inputs to RPM range and equipment type
Other useful features:
- Measures overall vibration (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement units of measurement for a wide variety of machines
- Provides Crest Factor+ technology for reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
- Compares vibration levels with ISO-10816 severity scales
- Allows you to view trending in Microsoft® Excel using pre-built templates
- Features colored lighting system (green, red) and on-screen comments to indicate how much pressure needs to be applied to take measurements
- Measures temperature with Spot IR Sensor to increase diagnostic capabilities
- Holds and saves up to 3,500 measurements in on-board memory
- Provides external accelerometer support for hard to reach locations
- Allows you to export data via USB
- Provides audio output for listening to bearing tones directly
- Features built-in flashlight for viewing measurement locations in dark areas
- Provides large high-resolution display for easy navigation and viewing
Specifications: Fluke 805 Vibration Meter
Vibration Meter | ||
Low frequency range (overall measurement) | 10 Hz to 1,000 Hz | |
High frequency range (CF+ measurement) | 4,000 Hz to 20,000 Hz | |
Severity levels | Good, satisfactory, unsatisfactory, unacceptable | |
Vibration limit | 50 g peak (100 g peak-peak) | |
A/D converter | 16-bit | |
Signal to noise ratio | 80 dB | |
Sampling rate | Low frequency | 20,000 Hz |
High frequency | 80,000 Hz | |
Real time clock backup | Coin battery | |
Sensor | ||
Sensitivity | 100 mV g ±10% | |
Measurement range | 0.01 g to 50 g | |
Low frequency range (overall measurement) | 10 Hz to 1,000 Hz | |
High frequency range | 4,000 Hz to 20,000 Hz | |
Resolution | 0.01 g | |
Accuracy | At 100 Hz ±5% of measured value | |
Amplitude Units | ||
Acceleration | g, m/sec² | |
Velocity | in/sec, mm/sec | |
Displacement | mils, mm | |
Infrared Thermometer (Temperature Measurement) | ||
Range | -20°C to 200°C (-4°F to 392°F) | |
Accuracy | ±2°C (4°F) | |
Focal length | Fixed, at ~3.8 cm (1.5 in) | |
External sensor | ||
Fluke supports but does not provide external sensors | ||
Frequency range | 10 Hz to 1,000 Hz | |
Bias voltage (to supply power) | 20 VDC to 22 VDC | |
Bias current (to supply power) | Maximum 5 mA | |
Firmware | ||
External interfaces | USB 2.0 (full speed) communication | |
Data capacity | Database on internal flash memory | |
Upgrade | Through USB | |
Memory | Up to 3,500 measurements | |
Radiated Emission | ||
Electrostatic discharge: burst | Standard EN 61000-4-2 | |
Electromagnetic interference | Standard EN 61000-4-3 | |
RE | Standard CISPR 11, Class A | |
Environmental | ||
Operating temperature | -20°C to 50°C (-4°F to 122°F) | |
Storage temperature | -30°C to 80°C (-22°F to 176°F) | |
Operating humidity | 10% to 95% RH (non-condensing) | |
Operating/storage altitude | Sea level to 3,048 meters (10,000 feet) | |
IP rating | IP54 | |
Vibration limit | 500 g peak | |
Drop test | 1 meter | |
General Specifications | ||
Battery type | AA (2) Lithium Iron Disulfide | |
Battery life | 250 measurements | |
Size (L x W x H) | 24.1 x 7.1 x 5.8 cm (9.5 x 2.8 x 2.3 in) | |
Weight | 0.40 kg (0.89 lb) | |
Connectors | USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector) |
Models: Fluke 805 Vibration Meter
Fluke 805
Fluke 805 Vibration Meter
Part#: 4094385UPC#: 0 95969 61069 8
Includes:
- USB cable
- Storage case
- Belt holster
- Quick reference guide
- CD-ROM (includes MS Excel template and documentation)
- Two (2) AA batteries
Appear RTC coin cell is drained or not mounted- what is this mate?
Is there a replacement part number for the Connection Cover?
Rated 1 out of 5 by JIGI from overall frustrating experience We have been using this devices since 2016. we have had to replace a device every two years due to issues with the battery, software on the device, wear and tear and overall difficulty of inputting and collecting information on the device. Setup of the functions on the device is difficult and long, with the base model you cannot delete items saved to the device without deleting all information into the device (you can delete specific measurements on the device, more on this later.).
If you are using the pressure sensor portion of the device it will commonly take 2 minutes to download information. saving information is difficult due to how the menu is setup. as you save more information to the device the slower it gets making it less than ideal if you have to trend multiple motors. if you create a list by accident, you cannot delete that specific list without permanently deleting everything on the device.
if maintenance is required due to wear and tear it has to be sent to the United States for repairs and calibration leaving us without a device to use for 2 months at a time. most of the repair costs are more than the device and we just have to buy a brand-new device!
Device is not accurate using the pen when comparing it to a external magnetic sensor. Batteries regularly move when the pen is being used causing the device to die mid read Batteries have to be replaced on a monthly basis if alkaline and every 3 months if lithium.
Date published: 2024-01-26
Rated 1 out of 5 by GIJI from FLUKE 805 , DATE/TIME RESET EVERY POWER OFF THIS IS USING SINCE 2016, DATE &TIME ISSUE IS THERE
Date published: 2021-03-02
Rated 3 out of 5 by sleung from Information About Vibration Meter Fluke-805 Could you tell me if the Fluke-805 meter's date/time is meant to reset everytime you power down the device off and power it back on?
Date published: 2017-08-07
Rated 4 out of 5 by Yesid from Information about Vibration meter Fluke-805 Could you tell me if the vibration meter include the octava analysis programa (band frequency) for vibration aplication?
Date published: 2015-04-28
Rated 1 out of 5 by Dissapointed from Just a vibration pen This tool in reality is so much less than what it's advertised as.
Date published: 2015-01-31
Rated 1 out of 5 by Minion from Data entry is a real pain. To be able to graph trends on a machine, you must give the machine a name, and all of the read points must also have their own name for that machine. I have hundreds of these to do, and it is incredibly difficult to enter on this meter. Fluke does not have any support software to interface computer entry. The meter makes quality reads, but the software has locked up 4 times in two days.
Date published: 2014-06-03
Rated 1 out of 5 by GRW58 from Battery life ruins it! When the 805 works it's great but the battery life is beyond abysmal, lithium, NiCd, NiMH they all get gobbled by the meter after 6 or so measurements! In fact brand new batteries get put in the same day and even though the meter is fully off they are down to 2 bars on the next power up! Could I possibly have a bad unit, I hope so because if this is the usual battery life the meter is about useless!
Date published: 2014-03-31
Rated 4 out of 5 by philbone from Missing external sensor information Great product, though it does not provide elementary information on what type of external sensors it supports.
Date published: 2014-01-14
Manuals + resources: Fluke 805 Vibration Meter
- 3 Ways To Improve Motor Health With Vibration Testing
- 7 money-saving tools for your team
- Better together - Ti400 Infrared Camera and 805 FC Vibration Meter
- Machine wear: how vibration analysis has evolved to increase uptime
- Reporting provides the quick answers you need
- Tiered maintenance uses new smart tools and work practices to boost reduced resources
- Top 5 questions all technicians should ask for more machine uptime
- What You Need To Know About Vibration Tools
- Connecting a thermal imager to your iPhone
- Connecting multiple tools at the same time with Fluke Connect®
- Connecting the T3000 FC with the Fluke Connect™ app
- How to Measure with Vibration Meters
- How to Set-Up Vibration Meters
- How to create an equipment baseline with EquipmentLog™ history
- How to email a measurement using the Fluke Connect app
- How to record measurements and graphs
- How to save measurements to EquipmentLog™ history
- How to share measurements on equipment using the Fluke Connect™ app
- Identifying intermittent conditions with TrendIt™ graphs
- Introduction to 789FC
- Measurement history in one place using EquipmentLog™ history
- Measuring from a safe distance using the Fluke Connect™ app
- Performing predictive maintenance with Fluke Connect™
- Saving measurements with AutoRecord™ measurements
- Share equipment health with EquipmentLog™ history
- Using ShareLive™ video call to share live measurements and video
- Viewing and graphing three phase measurements
- What are the Differences Between the Fluke 805 and Fluke 810