Fluke LVD2 Non-Contact Electrical Voltage Tester

Fluke LVD2 Non-Contact Electrical Voltage Tester is rated 3.2 out of 5 by 23.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 22.61ms
  • Fluke LVD2 Non-Contact Electrical Voltage Tester | Fluke
  • Fluke LVD2 Non-Contact Electrical Voltage Tester | Fluke
  • Fluke LVD2 Non-Contact Electrical Voltage Tester | Fluke
  • Fluke LVD2 Non-Contact Electrical Voltage Tester | Fluke

Key features

  • Non-contact AC voltage detector and LED flashlight
  • Detects from 90 to 600 V AC
  • Features dual-sensitivity for two levels of detection
  • Indicates proximity to AC voltage source with blue light
  • Indicates you’re at the source with red light
  • Ultra-bright white LED light with 100,000-hour bulb life
  • Safety rated to CAT IV 600 V
  • Operating temperature 0°C to 50°C
  • AAA battery included

Product overview: Fluke LVD2 Non-Contact Electrical Voltage Tester

Fluke LVD2 Volt Light detects voltage without contact

LVD2 volt light, offered by Fluke combines a non-contact AC voltage detector and LED flashlight into one easy to use pen-style design. It features dual sensitivity detection, turning blue from 1” to 5” (2.54 cm to 12.7 cm) from the source and red when at the source. The LVD2 is a CAT IV 600 V rated and is suitable for commercial and industrial applications.

Reviews: Fluke LVD2 Non-Contact Electrical Voltage Tester

Date published: 2018-10-27
Rated 1 out of 5 by from Have to rotate to see if you have voltage I had other fluke voltage testers and this LVD2 model is garbage, When you turn it on and place it near a wire, you may or may not know if there is power there because you have to rotate the unit to see if it lights up, The tip is square but only one side lights up near the handle. Very aggravating. The WHOLE thing SHOULD light up bright RED when there is power! Right now its a dinky LED inside that lights up. WHY is it so hard to make the WHOLE TIP light up at any angle? Right now its just a expensive flashlight! Come on FLUKE, I found this problem in 10 sec's - Don't make garbage light this!!!
Date published: 2018-10-26
Rated 4 out of 5 by from Multi use tool + n safety 1st n last Have worn out a few dropped some yet due value of useful design troubleshooting in dark lot ares or power outage purchase a new one like this compact style yet 4 stars as it could benefit from a more durable housing ☺
Date published: 2016-12-08
Rated 5 out of 5 by from Handy Tool Great product to keep in your pocket. Great for any job!
Date published: 2016-12-07
Rated 5 out of 5 by from Great product! I purchased this for my Maintenance crews for easily identifying wires in the rats nest of boxes we have. Looking forward to the long life use.
Date published: 2016-12-07
Rated 5 out of 5 by from Dont leave home without it I had an older 1 , this new one is easy to find and us,
Date published: 2016-12-07
Rated 5 out of 5 by from Satisfied Customer I've had this device for a few years now. I only use it for home projects and I must say that it is a fantastic tool. It lights the dark corners of my switch boxes and light fixtures. It has never failed to give an accurate "hot" reading. The blue light is a bit unnecessary but who cares really. I don't understand why others give it such a low rating? If the battery dies too soon, well stop forgetting to turn it off when you aren't using it. If the switch keeps breaking, then maybe you are a little too rough with the switch. If you like a sound and a light to indicate a "hot" wire, then maybe you should have purchased a detector that says it has an audible signal. This one clearly doesn't claim to have it. For around the house uses, it's just great. It has never failed and I'm still on the same battery that I put in over two years ago. PS- remove the battery when you store the detector between uses. Every home project which a detector was necessary has been a breeze with this product. Please, if you are looking for a specific tool for a specific job, make sure you purchase the tool that you actually need. This tool was purchased for home use and it's absolutely perfect.
Date published: 2016-08-04
Rated 1 out of 5 by from This tester is a joke! I should have listened to my peers. I am an electrical technician where the bulk of my job is constructing control panels. In my last job, I was working at a water treatment facility. For the meter, I used the Fluke 789 process meter which helped me program logic controllers and calibrate sensors. With my experience, the LVD2 is supposed to be for industrial applications; but, it just does not cut it. The problems with the LVD2 are: the device is too small (I am concerned for my safety inside a three-phase approx. 480V panel looking for blown breakers or fuses.), the device really is a flashlight with a gimmick of a poor voltage tester with a value of less than ten dollars and sold for 40, the LEDs are too faint (The lights are best seen with the lights turned off.), the sensitivity quickly deteriorates to the thing being just an expensive flashlight (most energy fields are attenuated with all the metal inside the panels.), the flashlight lens gets chaffed very quickly, it only works at detecting voltage by touching the wire in question (I suppose this helps in panels with many energized wires). But, without a second alarm, even in well lit inside areas, the tester's LEDs are hard to see (The blue LED is just extra since it works when I touch a hot). To improve the LVD2: the tester needs to be larger, made more rugged, the blue LED needs to be a brighter light (maybe yellow), needs to have a beeper or vibrator (which would add a second battery). A neat suggestion is to have it detect and follow a tracing signal. I think it would not be a stretch to make a circuit breaker finder with a voltage tester. Yes, the flashlight is a cool idea but its lens needs to be recessed into the end. Yes, I should have listened to my peers and purchased the 1AC-II. As far as this item, it is just junk and I wish I can trade it for the 1-AC-II.
Date published: 2015-10-02
  • y_2019, m_2, d_14, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_US, sid_fluke-lvd2, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 26.27ms