Fluke 1AC II Non-Contact Voltage Tester

Fluke 1AC II Non-Contact Voltage Tester is rated 3.3 out of 5 by 4.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 25.95ms
  • REVIEWS, PRODUCT
  • Fluke 1AC II Non-Contact Voltage Tester | Fluke
  • Fluke 1AC II Non-Contact Voltage Tester | Fluke
In stock
Sold by Fluke.com
FREE delivery by
30-day returns

Key features

  • Voltbeat™ technology and continuous self-test — so you always know it’s working
  • Upon detection, the VoltAlert™ tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
  • 20 V to 90 V AC control circuit model also available
  • Two-year warranty
  • Batteries included
  • On/Off button
  • Audible/Silent mode

Product overview: Fluke 1AC II Non-Contact Voltage Tester

The pocket-sized voltage detector

The portable VoltAlert™ AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miss-wires of an electrical outlet.

Specifications: Fluke 1AC II Non-Contact Voltage Tester

Specifications
Operating PrinciplesSenses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing rangesNominally, 90 V AC to 1000 V AC
Detector tip styleFlat-tip
Light sourceOne high intensity red LED
Agency Approvals
SafetyIEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V
EMCIEC 61326-1: Portable
IP RatingIP 40
Operating Temperature-10°C to 50°C (-14°F to 122°F)
Operating Humidity Ranges0% to 95% (0°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40 to 55°C)
Operating Altitude3000 m
CleaningClean with damp cloth
Batteries2 AAA alkaline batteries included
Battery LifeTypical battery life of greater than 1 year
Warranty PeriodTwo years
Product does not respond to random electrostatic discharge.

Models: Fluke 1AC II Non-Contact Voltage Tester

Fluke 1AC II

Reviews: Fluke 1AC II Non-Contact Voltage Tester

Rated 5 out of 5 by from Reliable after 4 years I've had this tester for 4 years and have tried to take good care of it. I use it within its designed purpose and it hasn't failed me yet with false negatives like other testers may. Finally a few months ago the clilp broke on it in the winter, I believe because it became brittle from the cold. Other reviewers mention the tip breaking off. I have been careful of this but I have seen others with the same tester have it happen. I won't use a different tester though, this one is in my opinion the best, functionally.
Date published: 2019-05-04
Rated 2 out of 5 by from Not a Non- Contact! This works perfectly fine with direct contact but unreliable with non-contact. I got shocked changing a garbage disposal switch because it was placed against the wire insulation and not the switch screws (which all of the cheaper brands I've owned was more than close enough) and gave me a false negative reading even though I had the wrong breaker off due to incorrect labeling in the panel. Fluke volt and multimeters are the best of the best but just a warning this needs direct contact for accuracy.
Date published: 2019-04-26
Rated 3 out of 5 by from Not for everyday pocket carry I have had this voltage tester for 3 months, and it has functioned properly the entire time. No battery replacement was need from occasional daily use during this period. It recently failed due to the tip breaking off in my pocket. This is not an every day carry item for the pocket
Date published: 2019-03-21
Rated 3 out of 5 by from Great tester, needs better "dropability" I've been using this kind of pen tester for years and really is the only one I ever want to buy. However, recently when I dropped my tester, it got stuck in a weird setting where it beeps non-stop, making me not have any faith in the tester anymore. I need to be sure my equipment, especially my voltage detector is up to par. My only solution now is to buy a brand new one. I took off 2 stars, just for the fact that my tester malfunctioned because it was dropped. These testers need to have a better dropability, especially if its only from a height of 5 feet!
Date published: 2019-03-07
  • y_2019, m_8, d_27, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_fluke-1ac-ii, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.89ms
  • REVIEWS, PRODUCT