Kết quả tìm kiếm

Dụng cụ kiểm tra ScopeMeter kết hợp tính di động bền chắc với hiệu suất cao của một dao động kế tiêu chuẩn.

The Fluke Calibration model 2468 Pitot Static Primary Standard is specifically designed for calibrating today's high performance flight line and Air Data Test Systems.

Connect the instrument to an available RS-232 port and start the IO Toolkit software.

COMPASS® for Flow is a fully customizable macro-enabled mass flow calibration software package based on the COMPASS® for Pressure software platform.

COMPASS® for Pressure Calibration Software is a universal platform for all of your pressure calibration software needs.

Fluke DAQ is a powerful configuration and application software that drives the NetDAQ and 2680 Series data acquisition products.

Fluke Calibration’s 1529 Chub-E4 Thermometer gives you four channels, three major sensor types, lab-quality accuracy, and a ton of great features.

Hộp xốp EVA bền chắc và có ngăn để đựng an toàn hầu hết đồng hồ vạn năng

Meets all ITS-90 requirements for resistance ratios

Designed for use on the 525B and 7526A Temperature/Pressure Calibrator; also suitable for the 5520A Multi-Product Calibrator

The Fluke 700SC is used to communicate with the Fluke 726, the Fluke 754, and the Fluke Calibration 3130. It allows you to connect these products to a PC. It also can connect a Fluke Calibration dry-well with a 754.

The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.

An accurate & economical solution if you need to calibrate digital multimeters, clamps, thermometers & other electronic test instruments. Learn more.

Trend Link V10 is a trend display program that works with the Full version of FlukeDAQ 6.0 (2680A-APSW) collecting and displaying data from any combination of Fluke Data Acquisition products.

The 6003A Three Phase Electrical Power Calibrator from Fluke Calibration offers compact, accurate three-phase power in a single, easy-to-use instrument.

Temperature sensor calibration software from Fluke Calibration is Windows based, easy to use, and automates data collection and report generation for temperature calibration laboratories.

5700A/EP from Fluke Calibration is an upgrade service that extends both the performance & service life of your existing 5700A Multifunction Calibrator.

The 5790B AC Measurement Standard is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

END OF SERVICE NOTICE: 1590 and 1575A Super Thermometers (130.61 KB)February 20, 2020 To Fluke Calibration’s 1590 and 1575A Super Thermometer owners: It has been 10 years since the end of life for the 1590 and 1575A Super Thermometers, and Fluke is now announcing the end of service for these obsolete versions of the Super Thermometer will take place on June 30, 2020. Please see  below for the full lifecycle of the products. Fluke model: 1590Introduction: 1998End of life: January 2010End of...

6003A Customer EOL Letter.pdf (91.11 KB)Effective April 2, 2021, Fluke Calibration will cease production and sale of the 6003A Three Phase Electrical Power Calibrator and all its unique and specific accessories and options. Fluke introduced this model in 2014 as a competitive calibrator capable of supplying accurate 3 phases of current and voltage. The Fluke 6130B is the closest replacement for the 6003A. While there is no direct replacement for the 6003A, the 6130B offers significant benefits in...

Electrical calibrator end of service (292.58 KB)January 28, 2022To better serve you, we want to make you aware of some important dates regarding the end of extended service support periods for some discontinued calibrators and instruments. Fluke Calibration typically offers extended service support for five years after discontinuing a product’s manufacture. After the extended support period has passed, we can no longer guarantee full service/repair parts to be available, and therefore possibly...

END OF SERVICE NOTICE: 5800A and 5820A (222.96 KB)February 4, 2020To Fluke Calibration’s original 5800A and 5820A owners:Today Fluke is notifying you that the extended repair and calibration support period for the 5800A and 5820A calibrators is ending June 30th, 2020. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full lifecycle of the products.Year ofFluke ModelIntroductionEnd...

MEMORANDUM FOR U.S. OWNERS AND OPERATORS USING GPS TO OBTAIN UTC TIME (211.91 KB)A recent notice from Homeland Security announces a GPS Week Number Rollover Event scheduled for April 6th, 2019. This event will affect the 910 and 910R products that were purchased before 2007.Dept. of Homeland Security Notice     What will happen?On this date, at the rollover time, some units will lose date information and display a 1999 date for reporting purposes. Frequency deviation data may not be archived within...

MET/CONNECT v 2.2.0 with MET/CAL v 11.1.0 (2.1 GB)   Document(s): MET/CONNECT 2.2.0 ReadMe (154.98 KB) MET/CAL 11.1.0 ReadMe (450.51 KB) MET/CONNECT Installation Guide (722.31 KB) MET/CONNECT API Reference (825.91 KB) Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.2.0 and MET/CAL version 11.1.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can...

END OF SERVICE NOTICE: 5700A and 5720A (211 KB)February 5, 2020 To Fluke Calibration’s 5700A and 5720A Series owners: Today Fluke is notifying you that the extended repair support period for the 5700A Series I and II and 5720A calibrators is ending June 30th, 2020, due to severe parts availability limitations. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full...

END OF SERVICE NOTICE: 5790A AC Measurement Standard (206.76 KB)July 31, 2020 To Fluke Calibration’s 5790A owners: Today Fluke is notifying you that the extended repair support period for the 5790A is ending December 31, 2020, due to severe parts availability limitations. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full lifecycle of the products.  Year ofFluke...

Fluke Calibration offers pressure calibration and repair services in the United States through our accredited calibration laboratories in Phoenix, Arizona and Everett, Washington. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about...

Fluke Calibration has software solutions for virtually every measurement discipline. Designed by measurement experts, these programs increase your productivity while strengthening your quality program and leaving a smile on your auditor's face.

Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Ruska Instruments, founded in 1944 in Houston, Texas, grew from a small manufacturer of PVT (pressure, volume, temperature) instrumentation to a leading global manufacturer of precision laboratory pressure instrumentation.  Its deep tradition of pressure metrology makes it a household name in National Metrology Institutes and in other worldwide organizations with demanding pressure calibration needs.  The Ruska brand features primary pressure standards, transfer standards, air data test sets, accessories,...

Product description:The product is the Fluke 27GHz ‘single-box’ RF calibrator, with Fluke MET/CAL calibration automation software. It provides a unique level of integration through a combination of performance, functionality, signal delivery and measurement capability:Precision signal level and attenuation, high signal purity and low distortion modulationLow phase noise and jitterIntegral power meter readout (thermistor type power sensors)Integral 50MHz frequency counterCalibration oriented user...

IntroductionFluke Calibration provides calibration and repair services for the former Hart Scientific line of temperature calibration equipment. Calibration and repair services for baths and industrial calibrators are provided in Everett, Washington, while digital thermometer readouts, 4180 and 4181 infrared calibrators, temperature probes (SPRTs, PRTs, thermistors, reference thermocouples) and other reference standards are calibrated and serviced in American Fork, Utah.Complete an online request...

Fluke Calibration offers instrument repair and calibration services for electrical and RF calibration equipment through our accredited calibration laboratories in Everett, Washington (see our Authorized Service Centers page for service outside of the US). Our prices are competitive and our turnaround times are excellent.Equipment types include:Frequency countersMulti-product and multifunction calibratorsVoltage, current and resistance calibratorsProcess calibratorsStandard resistorsZener reference...

Fluke Calibration offers flow calibration and repair services in the US through our accredited calibration laboratory in Phoenix, Arizona. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about these services or to request a quote call...

Protect your purchase, buy only from authorized sources

How the ii900 Acoustic Imager air leak detector can help you find the root cause of equipment issues and prevent costly downtime.

Tìm hiểu về các yêu cầu ngắt kết nối ngắt không tải PV năng lượng mặt trời được thiết kế để không làm ngắt quãng dòng điện.

Conveyor maintenance must be efficient to avoid expensive, unplanned downtime. This is particularly important in industries like food and beverage production, logistics warehousing, automotive manufacturing, mining, and raw material handling. The Fluke ii910 Precision Acoustic Imager with MecQ™ Mode provides a modern solution. It can detect potential problems in conveyor systems before they worsen. This allows maintenance teams to take proactive steps and maximize system performance. Fluke MecQ™...

The NFPA changed its recommended practice for electrical equipment maintenance to a standard. This means that proper maintenance is now required to keep electrical systems safe and reliable for workers. The purpose of NFPA 70B is to safeguard persons, property, and processes from risks associated with electrical equipment malfunction or failure. Maintenance is crucial for achieving this goal.Fluke Ti480 PRO Infrared Camera is one of many Fluke thermal imagers available to help technicians comply...

2638A Firmware (.zip)TITLEUSE WITH2638A 1.06.01 Firmware2638ATITLE2638A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Changed default Auto Record from OFF to ON, instrument will by default record data.Default measurement rate...

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

National Instruments LabView® driver for Fluke data acquisition instruments (.zip)This driver is compatible with these Fluke data acquisition products:2680 Series Data Acquisition Systems2640A NetDAQ Data Acquisition Unit2645A NetDAQ Data Acquisition Unit

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6105A/6100B Electrical Power Standards Firmware Upgrade (.zip)Documents:6105A/6100B firmware Change History and Installation Instructions (.doc)6105A/6100B Electrical Power Standards Firmware UpgradeThis firmware upgrade is suitable for all 6105A and 6100B units that have 2.xx or 4.xx firmware fitted.Note this firmware upgrade is NOT suitable for the 6105A/610B that currently has 1.xx or 3.xx firmware loaded. This upgrade can only be done at a service center.Note this firmware upgrade is NOT suitable...

CalTool for Analog Free Utility (.exe)TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.00TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.002003.01.27molbox1 (w/MFC option installed) & MFC-CBHelp File IncludedInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionCalTool™ for Analog is used to calibrate the analog circuits of molbox1 and MFC-CB. CalTool for Analog is PC based application that assists in the calibration...

96270A/96040 Firmware Update (.exe)Documents:96xxx Firmware Release Notes (.doc)96xxx Firmware Upgrade Instructions (.pdf)96270A/96040A RF Reference Source Firmware UpgradeDownload instructions and a list of firmware revision history, new features and resolved issues for the upgrade versions are documented at the link above. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have...

9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

Fluke DPC/Track2 60-Day Trial (.exe)Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke handheld’s documenting features.Using a labor-intensive, manual pen-and-paper system steals valuable resources and wastes time. And there’s also a high probability for measurement errors.With DPCTrack2, calibration time drops by 50% or more. Work assignments and calibration results...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

5320A Firmware Upgrade (.zip)Additional Downloads:5320A Uploader (.zip)5320A Multifunction Electrical Tester Calibrator Firmware UpgradeGeneral description5320A firmware upgrade ver. (3.43-1.34-2.43-1.01---2-9-2015) solves an issue in RCD trip current function and adds information lines to substitute leakage current screen.New features and enhancements1. Firmware“Substitute leakage current” function contains additional information on screen:Added line Rsubst with value of resistance connected...

molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

Phần mềm Fluke Connect trên ampe kìm 377 FC và 378 FC cho phép người dùng ghi, phân tích và chia sẻ kết quả với đồng đội. Lập xu hướng dữ liệu để bảo trì phòng ngừa.

Cách di chuyển từ máy dò rò rỉ bằng siêu âm đến phát hiện rò rỉ khí bằng hình ảnh với Máy chụp ảnh sóng âm công nghiệp ii900 đã giúp cung cấp ROI và tăng tối đa công suất.

Ngày 4 tháng 3 hằng năm là Ngày Kỹ thuật Thế giới. Lễ kỷ niệm quốc tế hàng năm này nêu bật những thành tựu của các kỹ sư. Từ việc phát minh bánh xe cho đến tàu thăm dò Sao Hỏa, kỹ thuật đóng vai trò dẫn đầu trong văn hóa của chúng ta. Đó là lý do Ngày Kỹ thuật Thế giới không chỉ dừng lại trong việc ăn mừng những cải tiến công nghệ và kỹ thuật kiến thức chuyên sâu bổ sung cho cuộc...

1586A Firmware (.zip)TITLEUSE WITH1586A 1.06.01 Firmware1586ATITLE1586A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Corrects an issue with user defined Alarm and Timestamp configuration getting lost.Note: Users of 2680A-APSW...

To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

The “manufacturing” process here relies on “shots” of laser energy focused on a target the size of a BB.The product: a nuclear reaction six times hotter than the core of the sun . . . and a growing understanding of fusion reactions that could one day free the planet from dependence on dwindling fossil fuels.Here at the National Ignition Facility (NIF) at California’s Lawrence Livermore National Laboratory, scientists are working to create nuclear fusion reactions that unleash more energy...

With ratio accuracy as good as 0.06 ppm (0.000015 °C) the Fluke Calibration Super-Thermometer is sure to become a highly valued instrument in your calibration laboratory. It is an ideal choice for applications that previously required the use of complex and expensive bridges, such as calibrating SPRTs, PRTs, and thermistors.10 reasons to choose the Super Thermometer for your high accuracy temperature measurements.1. Accurate enough for the primary lab, economical enough for the secondary labThe...

.sub-title { padding-top: 10px; } .warning { padding: 0 30px; } .hr-warning { margin: 25px 0px 30px 0px; font-size: 1px; line-height: 1px; border-top: 0px solid #ffffff; border-right: 0px solid #ffffff; border-bottom: 1px solid #000000; border-bottom-color: #000000!important; border-left: 0px solid #ffffff; } Fluke Energy Analyze PlusFluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and...

Solar power is one of the world’s fastest growing sources of energy. The industry and those who support it through services and related hardware and software are improving and innovating at a rapid pace.

Here are some of the most important reasons for you to consider a purchase from Fluke Calibration.

Organizational goals are translated into manufacturing/ process requirements. Increasingly individuals and organizations depend on others to meet those requirements, and the tools they use may not all be compatible

Learn about viscosity, compressibility, head pressure, safety, fluid compatibility, pressure stability, fitting & tube selection, & reference standards.

Though the principle of radiation thermometry has been used in industry for decades, its recent growth in the HVAC, factory maintenance, aerospace, and energy industries is causing many people to inquire about infrared (IR) thermometers and the calibration equipment needed to support them

Temperature measurement is a critical parameter in many industrial processes. As a result, these processes generally use installed thermometers or temperature transducers. Proper calibration of these installed systems has always presented a challenge. Traditionally, simulators are used to provide in-situ calibration of the electronic portions of these systems. Although this is a valid technique for the calibration of the electronics, considerable inaccuracies are introduced by the sensor itself.The...

Use the 1586A Super-DAQ to automate temperature sensor calibration The 1586A Super-DAQ Precision Temperature Scanner provides a unique feature for automating sensor calibration that can greatly increase your lab productivity—without a PC and software. When the Super-DAQ is connected to a Fluke Calibration dry-well or fluid bath, it can control the temperature source to run the calibration automatically. You simply program the number of set-point temperatures and their values, select a scan sequence,...

Learn the basics of infrared temperature calibration including how infrared thermometers work, emissivity, blackbodies, detecting radiance & more.

See why Fluke makes the best liquid bath calibrators & sells the most. Excelling in range of baths, controllers, automation, technology, mixing, & maintenance.

Learn the most common reasons why someone might upgrade to a modular pressure control system for their existing calibration standards.

Learn how MET/CONNECT Calibration Integration Software allows you to use MET/CAL Software without an asset management application or with the one of your choice.

Fluke Calibration ceased production and sale of the 6003A Three Phase Electrical Power Calibrator and its specific accessories and options. Fluke introduced this model in 2014 as a competitive power calibrator capable of supplying accurate 3 phases of current and voltage.

Save time and money by using a 1586A Super-DAQ and a Fluke Calibration dry-well, fluid bath, or furnace to automate the calibration of up to 40 temperature sensors—simultaneously, without requiring a PC or software.

Get answers to common questions about the safety of a high-pressure supply & the capabilities of the Fluke 8270A/8370A High-Pressure Controller/Calibrator.

Get guidance on how to verify the performance of the capacitance function of the 8588A including methodology, measurement process, and pitfalls that can occur.

Discover Fluke resources on how & why to prevent contamination in pressure calibration including videos, webinars, and blog posts. Learn more here.

The first version of MET/CAL that I saw was version 0.86 – it was a pre-release. I was working at the Fluke/Philips service center from 1990 to 1994, here in Holland. In the beginning of the 90’s in this lab they started using MET/CAL, starting on very simple PCs, now it is one of the most advanced labs in using MET/CAL.

This page contains links to a range of short videos that quickly and conveniently highlight some of the simplifications, efficiencies and automation that Fluke Calibration brings to RF and microwave calibration.An Overview of the 9640AFluke Calibration’s innovative calibration technology, now applied to RF and microwave calibration, greatly simplifies what is often a labor-intensive task with a powerful combination of the 9640A RF Reference and MET/CAL Calibration Software. The first video highlights...

Fluke MET/CAL procedures to calibrate a digital multimeter. Watch the video to see how the MET/CAL software walks you through the process.

Owning an end-of-life calibrator presents risks to your business or workflow & can prevent you from leveraging the latest technology. Learn more here.

Metrologists & calibration technicians deal with a variety of high frequency considerations such matching errors. Understanding how sources of errors in oscilloscope calibration influence the results & how to address them can simplify scope calibration, reduce errors & ease the burden of uncertainty analysis

Fluke Calibration offers free, online ISO 17025 training to address the 2017 changes in the form of this article and training webinars. Get the info here.

Find the best Fluke Calibration industrial temperature calibrator for your workload.

Learn the 3 methods of deadweight tester and piston gauge gravity correction in this brief app note.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Choosing a bath should not be that difficult but there are a lot of choices. For some, it’s unfamiliar territory and in that case, I thought you might like to have a map.

When does height equal pressure? Well the simple answer is it doesn't, but more on that later. A less simple answer is that height based pressure unit standards for manometers have evolved significantly over time. This has left an interesting legacy that you need to be aware of if you calibrate pressure instruments using height based units.

Successful selection of a calibrator involves a thorough analysis of the specifications of both the equipment to be tested and the calibrating standards.

Unit of Measure Converter Free Utility (.exe)TITLEVERUSE WITH Unit of Measure Converter Free Utility2.01a2006.08.15All Products Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe Unit of Measure Converter is a free ActiveX control distributed by Fluke Calibration. This program can be run stand alone or built into other applications. Use the [Show Help] menu choice for details on using this tool.Warning - Fluke Calibration has made...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

World Metrology Day 2014A message from Fluke Chief Corporate Metrologist Jeff GustWorld Metrology Day commemorates the signing of the Meter Convention on May 20, 1875. Those who are dedicated to metrology, the science of measurement, recognize this day each year as their time to celebrate the importance of measurements. Fluke Corporation joins enthusiastically in this annual celebration, as we have a long history of dedication to metrology. The theme for World Metrology Day 2014 is “Measurements...

Annual global event highlights why measurement matters in everyday lifeEverett, Wash., May 20, 2013 – On May 20th, scientists and organizations dedicated to metrology celebrate World Metrology Day, which commemorates the signing of the international treaty to coordinate weights and measures activities and support the development of the metric system. Fluke Corporation recognizes World Metrology Day as a time to appreciate the scientists in national laboratories throughout the world who dedicate...