Zoekresultaten

Lokaliseer potentiële mechanische problemen in transportbanden en deelontladingen in elektrische netwerken.

De gebruiksvriendelijke oplossing voor gegevensbeheer en rapportage.

Met de complete set kunt u efficiënt testen volgens alle lokale voorschriften zonder het laadstation te openen.

Duurzame behuizing en verdeler van EVA-schuim om de meeste multimeters veilig mee te nemen

Combineer de kracht van de Fluke 1662 multifunctionele tester met TruTest-gegevensbeheersoftware

Combineer de kracht van de Fluke 6500-2 draagbare-apparatentester met TruTest-gegevensbeheersoftware

COMPASS® for Pressure Calibration Software is a universal platform for all of your pressure calibration software needs.

Connect the instrument to an available RS-232 port and start the IO Toolkit software.

Complete oplossing voor veiligheids- en prestatietests van AC EV-laadstations voor elektrische voertuigen

Meetsnoer-accessoireset speciaal voor het opsporen van draden, kabels en circuits en het oplossen van storingen.

Controleer de aardingsfout, isolatie van draden, spanning en duty cycle in één adapter.

Ontworpen om de werking en veiligheid van laadstations, modus 3, voor het opladen van AC-tractiebatterijen te testen.

Ideal for analyzing data from solar PV installations and inspections.

Vervangende zekeringeenheid van 440 mA voor de Fluke 28 II Ex Intrinsiek veilige digitale multimeter

Vervanging van zekeringen voor Fluke-testers inclusief de Fluke 1507 en Fluke 1503.

Directe stralingsmetingen tot 1400 w/m2. Inclusief temperatuur-, kompas- en hellingswaarden.

Wat als er lekdetectietechnologie zou bestaan die de exacte locatie van een lek tot op 50 meter afstand kan lokaliseren? De Fluke ii900 Sonic Industrial Imager is baanbrekend bij de opsporing van persluchtlekkages.

END OF SERVICE NOTICE: 1590 and 1575A Super Thermometers (130.61 KB)February 20, 2020 To Fluke Calibration’s 1590 and 1575A Super Thermometer owners: It has been 10 years since the end of life for the 1590 and 1575A Super Thermometers, and Fluke is now announcing the end of service for these obsolete versions of the Super Thermometer will take place on June 30, 2020. Please see  below for the full lifecycle of the products. Fluke model: 1590Introduction: 1998End of life: January 2010End of...

Download MET/CAL version 11.0.2 Hot Fix (.zip)Download MET/CAL version 11.0.2 ReadMe (.pdf)Current MET/CAL Customers:The MET/CAL 11.0.2 Hot Fix release is an update to previous MET/CAL software. This update includes a bug fix for the 5540A/5550A/5560A FSCs.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.0.2.Follow the instructions in the MET/CAL 11.0.2 Hot Fix readme file...

Als deskundige op het gebied van elektrische installatie en onderhoud weet u dat efficiëntie en nauwkeurigheid bij het testen essentieel zijn. Maar het zou niet uw hele werkdag moeten opslokken. Wij werken samen met elektriciens en onderhoudsspecialisten die te maken krijgen met uitdagingen die hun productiviteit verminderen.

11/15/24 - reindex - LF

Update: MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (.zip)MET/CAL 11.0.2 Read Me (.pdf)Current MET/CAL Accuracy Files (.zip)Default Comm Settings File (Place in Shared Directory) (.zip) document.getElementsByClassName("field-caption-wrapper")[0].innerHTML = "MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (1.6 GB)"; This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 11.0.2 release is an update...

END OF SERVICE NOTICE: 5800A and 5820A (222.96 KB)February 4, 2020To Fluke Calibration’s original 5800A and 5820A owners:Today Fluke is notifying you that the extended repair and calibration support period for the 5800A and 5820A calibrators is ending June 30th, 2020. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full lifecycle of the products.Year ofFluke ModelIntroductionEnd...

END OF SERVICE NOTICE: 5700A and 5720A (211 KB)February 5, 2020 To Fluke Calibration’s 5700A and 5720A Series owners: Today Fluke is notifying you that the extended repair support period for the 5700A Series I and II and 5720A calibrators is ending June 30th, 2020, due to severe parts availability limitations. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full...

Fluke Calibration offers pressure calibration and repair services in the United States through our accredited calibration laboratories in Phoenix, Arizona and Everett, Washington. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about...

Fluke Calibration provides calibration and repair services for humidity calibration equipment through our accredited calibration laboratories in American Fork, Utah (5128A RHapid-Cal® Humidity Generator and 1620A Digital Thermometer-Hygrometer) and Phoenix, Arizona (2456-LEM Laboratory Equipment Monitor). Our prices and turnaround times are competitive and our quality and capabilities are unmatched.For more information about these services or to request a quote, call 877-355-3225 or email us at...

1594A_1595A Calibration Constant Notification.pdf (97.63 KB)It was discovered that when a customer selects the “Restore Factory Default” button in the Config menu, the resistor calibration values are reset to the default values without requiring a password or notification to the customer that the values are being reset. The resistor calibration values are the instrument’s main calibration and the reset may cause out of tolerance measurements. Engineering has investigated this issue and the...

Update: MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (.zip)MET/CAL 11.0.2 Read Me (.pdf)Current MET/CAL Accuracy Files (.zip)Default Comm Settings File (Place in Shared Directory) (.zip) This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 11.0.2 release is an update to previous MET/CAL software. This update includes bug fixes.Do not manually uninstall the previous version. If you do this before attempting...

Hot Fix: MET/CAL version 11.0.2 Hot Fix 2 (.zip)Hot Fix: MET/CAL version 11.0.2 Hot Fix 2 Read Me(.pdf)Current MET/CAL Customers:The MET/CAL 11.0.2 Hot Fix 2 release is an update to previous MET/CAL software. This update includes a bug fix for legacy calibrator FSCs. It also includes the fix from the previous Hot Fix.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.0.2.Follow...

Zelfs de kleinste luchtlekkages kunnen leiden tot verspilling van producten en energie en verlies van productietijd, met name bij een productielijn die alleen kan functioneren met perslucht om gereedschappen en processen aan te drijven.

Ontdek hoe luchtlekdetectieapparatuur uitvaltijd voorkomt in een fabriek van 14.000 vierkante meter met zo'n 400 stuks persluchtgereedschap, aangedreven door een compressor met een vermogen van 200 pk.

We hebben onlangs elektriciens gevraagd naar hun top 5 van essentiële instrumenten. Er waren een paar gelijke scores, dus hier is hun top 7.

Learn how to improve power factor, including specific solutions for different root causes of poor power factor.

Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Ruska Instruments, founded in 1944 in Houston, Texas, grew from a small manufacturer of PVT (pressure, volume, temperature) instrumentation to a leading global manufacturer of precision laboratory pressure instrumentation.  Its deep tradition of pressure metrology makes it a household name in National Metrology Institutes and in other worldwide organizations with demanding pressure calibration needs.  The Ruska brand features primary pressure standards, transfer standards, air data test sets, accessories,...

Deskundige begeleiding door experts in zonne-energie bij het ontwerpen en inbedrijfstellen van een fotovoltaïsch systeem voor maximale prestaties, inclusief levensduur van apparatuur, veiligheid en rendement op de investeringen.

IntroductionFluke Calibration provides calibration and repair services for the former Hart Scientific line of temperature calibration equipment. Calibration and repair services for baths and industrial calibrators are provided in Everett, Washington, while digital thermometer readouts, 4180 and 4181 infrared calibrators, temperature probes (SPRTs, PRTs, thermistors, reference thermocouples) and other reference standards are calibrated and serviced in American Fork, Utah.Complete an online request...

Fluke Calibration offers instrument repair and calibration services for electrical and RF calibration equipment through our accredited calibration laboratories in Everett, Washington (see our Authorized Service Centers page for service outside of the US). Our prices are competitive and our turnaround times are excellent.Equipment types include:Frequency countersMulti-product and multifunction calibratorsVoltage, current and resistance calibratorsProcess calibratorsStandard resistorsZener reference...

Fluke Calibration offers flow calibration and repair services in the US through our accredited calibration laboratory in Phoenix, Arizona. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about these services or to request a quote call...

Make energy efficiency a part of your preventive maintenance plan to make a positive impact on your bottom line, improve plant performance, and maintain uptime.

Using Fluke tools for energy efficiency and cost savings. How the Figge Art Museum automated their HVAC control systems, reduced energy consumption and saved on annual energy costs

Hot Fix: MET/CAL version 11.1.0 Hot Fix 3 (.zip)Hot Fix: MET/CAL version 11.1.0 Hot Fix 3 Read Me (.pdf)Current MET/CAL Customers:The MET/CAL 11.1.0 Hot Fix 3 release is an update to previous MET/CAL software. This update includes bug fixes. It also includes the fixes from the previous Hot Fixes.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.1.0.Follow the instructions in...

Transformer infrared inspections can show you abnormal thermal overload patterns in cooling tubes which can be escalated for troubleshooting.

De experts van Fluke gaan naar de kern van uw vragen over onderhoud en metingen aan de hand van tips en trucs - in minder dan een minuut.

De effecten van wind op thermografie begrijpen. Geforceerde convectie kan in de vorm van wind, een ventilator of zelfs een pomp komen, en het resultaat van deze geforceerde convectie zal de temperatuur van het meetobject beïnvloeden.

Wat is de nauwkeurigheid van een digitale multimeter? Hoe zorgen digitale multimeters voor consistente meetwaarden? Wat wordt bedoeld met resolutie bij metingen? Wat is het bereik van een multimeter? Wat is het verschil tussen counts en digits? Het gebruik van een multimeter die de juiste metingen levert, is belangrijk. Het is nog belangrijker te weten wat deze metingen betekenen. Nauwkeurigheid en precisie zorgen ervoor dat de metingen die u verricht zinvol zijn; een hogere precisie maakt een...

Stroomtangen met flexibele spoelprobes zijn geschikt voor kleine ruimten.

Ontdek waarom reflecterende oppervlakken problemen veroorzaken met de emissiviteit en reflectiviteit bij infraroodthermografie en ontdek een eenvoudige manier om de nauwkeurigheid met uw warmtebeeldcamera te vergroten.

Ontdek waarom een onjuiste scherpstelling de temperatuur met 20 graden of meer kan verkeerd kan melden en hoe u de nauwkeurigheid van uw warmtebeeldcamera kunt verbeteren door een paar tips te volgen.

Lijst met de 5 belangrijkste industriële instrumenten voor storingzoeken in elektrische installaties voor bedrijven zonder onderhoudsmonteurs en hoofdelektriciens.

How to perform risk assessments when using Energized Electrical Work Permits (EEWPs). Anyone working with electricity is responsible for electrical safety and identifying hazards.

Detecteer basale problemen met de vermogenskwaliteit van driefasennetwerken met de veelzijdige Fluke 378 FC-stroomtang voor industriële elektriciens. Verhoog de productiviteit en veiligheid zonder de noodzaak van meetkabels.

How to find hot spots in electrical systems using a thermal camera. Learn what to look for and understand what causes emissivity anomalies during inspections.

Hoe u een bedrijfscultuur kunt cultiveren waarin werknemers de noodzakelijke stappen nemen om een cultuur van veiligheid op te bouwen

Ontdek hoe de bestverkopende tweepolige elektrische tester van Fluke u kan helpen bij het veilig testen op aanwezigheid van spanning op dubbelpolige stroomonderbrekers. Ontdek hoe de bestverkopende tweepolige elektrische tester van Fluke u kan helpen bij het veilig testen op aanwezigheid van spanning op dubbelpolige stroomonderbrekers.

Het verschil tussen een oscilloscoop en een digitale multimeter (DMM) kan het eenvoudigst worden omschreven met plaatjes in plaats van met getallen. Meer informatie, inclusief wanneer u ze moet gebruiken.

Waarom weerstand meten? Om de conditie van een stroomkring of component vast te stellen. Hoe hoger de weerstand, hoe lager de stroom en vice versa. In het algemeen is de weerstand van componenten die worden gebruikt om stroomkringen te regelen (zoals schakelaars en relaiscontacten) aanvankelijk heel laag en neemt deze in de loop van de tijd toe als gevolg van factoren als slijtage en vuil. De weerstand van belastingen zoals motoren en magneetkleppen neemt in de loop van de tijd af als gevolg van...

stappen voor het meten van frequentie met een digitale multimeter

Stappen voor het gebruik van een multimeter in de diodetestmodus

Hoe de ii900 Acoustic Imager luchtlekdetector u kan helpen de achterliggende oorzaak van problemen met apparatuur te vinden en kostbare uitvaltijd te voorkomen.

Doorgang is de aanwezigheid van een volledig stroompad. Een ingeschakelde gesloten schakelaar heeft bijvoorbeeld doorgang.

Meer informatie over warmtebeeldcamera's voor gebouw- en woninginspecties. Zoek de beste warmtebeeldcamera voor HVAC.

Belangrijke veiligheidsmededeling met betrekking tot de Fluke 8x V-serie digitale multimeters

To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

Hot Fix: MET/TEAM version 2.3.0 Hot Fix 2 (.zip)This Hot Fix is to resolve an issue that causes failures to save MET/CAL results data when using Windows Authentication. If you do not use Windows Authentication, this is not a necessary update.Current MET/TEAM Customers:The MET/TEAM 2.3.0 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations...

Hot Fix: MET/CAL version 10.2.2 Hot Fix (.zip)Documents:MET/CAL version 10.2.2 Hot Fix Readme (.pdf)This hot fix applies to both MET/TEAM and MET/CONNECT versions of MET/CAL.Current MET/CAL Customers:The MET/CAL 10.2.2 Hot Fix release is an update to previous MET/CAL software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on each MET/CAL Client PC.Do not uninstall MET/CAL 10.2.2.Follow the instructions...

Hot Fix: MET/TEAM version 3.0.0 Hot Fix 2 (.zip)Documents:MET/TEAM version 3.0.0 Hot Fix 2 Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.0.0 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes bug fixes only. It includes all items resolved in the first MET/TEAM 3.0.0 Hot Fix.After installing this Hot Fix, you must install MET/CAL version 10.4.0. This Hot Fix is not compatible with MET/CAL version 10.2.xThis download does not include an installer. The included...

Hot Fix: MET/TEAM version 3.0.0 Hot Fix (.zip)Documents:MET/TEAM version 3.0.0 Hot Fix Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.0.0 Hot Fix release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/TEAM server.Do not uninstall MET/TEAM 3.0.0.Follow the instructions in the MET/TEAM 3.0.0 Hot Fix readme file to install this update.New...

Hot Fix: MET/TEAM version 3.2.0 Hot Fix (.zip)Documents:MET/TEAM version 3.2.0 Hot Fix Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.2.0 Hot Fix release is an update to previous MET/TEAM software. This update includes security fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/TEAM server.Do not uninstall MET/TEAM 3.2.0.Follow the instructions in the MET/TEAM 3.0.0 Hot Fix readme file to install this...

MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

FlukeView® Forms Demo/Reader Software Downloads (.exe)You can download the free Demo/Reader version of FlukeView® Forms from this page. It allows you to open any FlukeView® Forms file and view or edit data that has been saved by a FlukeView® Forms user. It also allows you to see how data can be displayed, formatted, printed and saved in FlukeView® Forms.This demonstration software does not include the FlukeView® Forms Designer, which allows you to customize your forms.System Requirements for...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

Definitie deelontlading. Lees hoe deelontlading plaatsvindt, wat de oorzaken van deelontlading zijn en wat de 4 hoofdtypen deelontlading zijn.

Wie heeft de multimeter uitgevonden? Van galvanometers en voltmeters tot digitale multimeters met warmtebeeldtechniek en draadloze functionaliteit. Geschiedenis van Fluke-multimetermodellen.

De AC-frequentie is het aantal cycli per seconden in een wisselstroomsinusgolf (AC-sinusgolf).

Bekijk de verschillen tussen de akoestische beeldcamera's van de Fluke ii900 en ii910 in termen van specificaties en functionaliteit.

Door de Fluke Connect-software te gebruiken met de 377 FC- en 378 FC-stroomtangen kunt u resultaten registreren, analyseren en met anderen delen. Leg trendgegevens vast ten behoeve van preventief onderhoud.

Het rendement op uw investering (return on investment, ROI) dat u kunt verwachten wanneer u een infraroodcamera (ook wel warmtebeeldcamera genoemd) toevoegt aan uw inspectiemiddelen, is afhankelijk van allerlei variabelen. Bijvoorbeeld of u manager bent van een industriële installatie of een installateur/adviseur. Hieronder vindt u een aantal voorbeelden van de bijdrage die een warmtebeeldcamera kan leveren aan de ROI. Manager van een industriële installatie Het gebruik van een warmtebeeldcamera...

Fluke experts show you how to calibrate a pressure transducer including a step-by-step pressure transducer calibration procedure, certificate, and tips.

Maximaliseer de prestaties van uw pneumatische instrumenten met de Fluke ii900 Acoustic Imager. Stel snel en eenvoudig een diagnose van de drukval en de luchtstroom in persluchtleidingen.

Deelontlading testen en bewaken met een Fluke ii910 akoestische beeldvormingscamera. Ontdek hoe u een deelontladingstest uitvoert.

If you are purchasing a calibrator to calibrate pressure measurement devices, follow these 2 simple steps to ensure you get what you need.

.super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; font-size: 10px; -webkit-tap-highlight-color: transparent } .super-custom body { font-family: "Helvetica Neue",Helvetica,Arial,sans-serif;font-size:14px;line-height:1.42857143;color:#333;background-color:#fff;margin:0}.super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup,...

The “manufacturing” process here relies on “shots” of laser energy focused on a target the size of a BB.The product: a nuclear reaction six times hotter than the core of the sun . . . and a growing understanding of fusion reactions that could one day free the planet from dependence on dwindling fossil fuels.Here at the National Ignition Facility (NIF) at California’s Lawrence Livermore National Laboratory, scientists are working to create nuclear fusion reactions that unleash more energy...

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

.sub-title { padding-top: 10px; } .warning { padding: 0 30px; } .hr-warning { margin: 25px 0px 30px 0px; font-size: 1px; line-height: 1px; border-top: 0px solid #ffffff; border-right: 0px solid #ffffff; border-bottom: 1px solid #000000; border-bottom-color: #000000!important; border-left: 0px solid #ffffff; } Fluke Energy Analyze PlusFluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and...

See the key differences between the Fluke 787 vs 789 as determined by Fluke engineers. What are the key feature and spec differences? See the comparison here.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Learn about viscosity, compressibility, head pressure, safety, fluid compatibility, pressure stability, fitting & tube selection, & reference standards.

There are a few instruments used to perform infrared (IR) thermometer and IR imager calibration. These instruments fall into two categories, cavities and flat-plates. To calculate the uncertainty in using these instruments, the temperature uniformity must be known. This is especially true with flat-plates. This uncertainty may be given in an instrument’s specification. However, there is not a standardized test method to test the uniformity of a flat-plate calibrator as there is with other classes...

Learn the basics of infrared temperature calibration including how infrared thermometers work, emissivity, blackbodies, detecting radiance & more.