Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Test Kit
Key features
- Validate Cable Performance up to 10GBASE-T for EtherNet/IP, PROFINET, EtherCAT
- Get connected switch data rate, name, port number, and VLAN
- Detect the PoE class (1-8) and power, and perform a load test
- Cable diagnostics w/ length plus IntelliTone™ and remotes 2-8
- Manage results and print reports from LinkWare™ PC
Product overview: Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Test Kit
The LinkIQ™ is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable.
The included MS-IE Remote Adapter allows to identify miswired and split pairs on RJ45, M12X, M12D, and M8D terminated cables.
The LinkIQ™ supports EtherNet/IP, PROFINET, EtherCAT and other Industrial Ethernet protocols and qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb/s up to 10 Gb/s) and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE testing and load test up to Class 8 (90W).
Includes LinkIQ™ Main Unit, Remote ID #1-7, IntelliTone(TM) Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide,AC charger, RJ45/11 universal coupler, RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord, RJ45/11 Modular Adapter, Hanging strap with Remote ID holder, and duffle bag carry case.
Specifications: Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Test Kit
Feature | Description |
Languages supported in UI | English (SW v1.0) |
Weight | 1 lbs 6 oz (624g) |
Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 0 °C to +40 °C |
Power Adapter | Input: 100 to 240 VAC ±10%, 50/60Hz Output: 15 VDC, 2 A maximum Class II |
Host Interface | USB type C |
Display | 800 x 480 color capacitive multi-touch |
Dimensions | 8.5 in x 4.5 in |
Operating Temperature | 0°C to 45°C |
Storage Temperature | -10°C to +60°C |
Operating Relative Humidity | 0 % to 90 %, 0°C to 35°C 0 % to 70 %, 35°C to 45°C |
Operating Altitude | 4,000 m 3,200 m with ac adapter |
Vibration | Random, 2 g, 5 Hz-500 Hz |
Drop | 1 m drop, 6 sides |
Active Network Diagnostics
Feature | Description |
Diagnostic Protocols | Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) |
Nearest Device Diagnostics (If available through diagnostic protocols) | Switch Name Port Number VLAN Name Advertised Data Rates Advertised Duplex |
Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation with LLDP/CDP |
Power Over Ethernet Diagnostics | Advertised Power Class (1 to 4) (SW v1.0) Advertised Available Power Powered Pairs Diagnostics for both Single and Dual signatures |
Power Over Ethernet Measurements | Loaded Voltage (V) Loaded Power (W) |
Port Blink | Blink the light of the connected port |
Cable Test Specifications
Feature | Description |
Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs. |
Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only. Test Speed: 6 seconds for lengths < 70 m |
Cable Types | Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings (Straight through, Half-crossover, Full-crossover) Test speed: 1 second for lengths < 120 m |
Length (Maximum) | 305 m (1000 ft) |
Nominal Velocity of Propagation (NVP) | User settable |
Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe. Generates analogy tones compatible with general analog probes. |
Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |
Models: Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Test Kit
LIQ-KIT-IE Advanced Industrial Ethernet Kit
Includes:
- LinkIQ™ Main Unit
- Remote ID #1-7
- IntelliTone(TM) Pro 200 Probe
- RJ45-RJ45 patch cord (M-F)
- RJ45-RJ45 patch cord (M-F)
- Quick Reference Guide
- AC charger
- RJ45/11 universal coupler
- RJ45/M12X patch cord
- RJ45/M12D patch cord
- RJ45/M8D patch cord
- RJ45/11 Modular Adapter
- Hanging strap with Remote ID holder
- Duffle bag carry case