English

Fluke 1770 Series Three-Phase Power Quality Analyzers

Model#: Fluke 1773 Power Quality Analyzer Part#: 5117269 UPC#: 0 95969 91766 7
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.48ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke 1777 Power Quality Analyzer
  • Fluke 1777 touchscreen works with gloves
  • Measure over 500 power quality parameters with the Fluke 1770 series
  • Fluke 1777 Power Quality Analyzer
  • Fluke 1777 Power Quality Analyzer

Key features

  • New Firmware Update: Energy Loss Calculator
  • Automatically measure power and power quality parameters
  • At-a-glance power quality health for faster troubleshooting
  • Easily view V/A/Hz, power, dips, swells, and harmonics data
  • Capture high-speed transients up to 8 kV
  • Power directly from measurement circuit without a line cord
In stock
$8,475.99
Now with Care Plan options
FREE Shipping
30-day Returns
Product + Premium Care Plan
Premium Care Plan only (I already own the product)
No thanks

Product overview: Fluke 1770 Series Three-Phase Power Quality Analyzers

Fluke Premium Care eligible

When you invest in your Fluke test tools, you want your money to go as far as possible. Fluke Premium Care is a paid offering that provides coverage above and beyond the original product warranty, so you don’t need to worry about unexpected downtime caused by damaged test equipment, accessories, or tools in need of calibration or repair.

Learn more

Automatic measurements. More flexibility. Better power quality troubleshooting.

Fluke 1770 Series Three-Phase Power Quality Analyzers eliminate the complexities of power quality logging, troubleshooting, and analysis. Engineered to be the faster, easier way to perform power quality studies, the 1770 Series offers automatic measurements, a straightforward user interface and setup, best-in-class specifications, and a simplified reporting platform. The instrument can also be powered directly from the measurement circuit, eliminating the need to find a power outlet or use a lengthy extension cord

With the 1770 Series you’ll never miss a critical power quality event—from fast transients up to 8 kV, harmonics up to 30 kHz, dips and swells, as well as the voltage, current, and power measurements that enable you to characterize your electrical system.

Get the Fluke Guide to Choosing Power Quality Tools  

Automatic measurement capture

Whether you’re performing a quick system check or a detailed power quality study, consistent data is key. The Fluke 1770 Series offers a unique automatic measurement capture system that helps ensure you’re collecting the right data every time, while still giving you the flexibility to select and adjust specific parameters as needed. More than 500 power quality parameters are captured by default and the guided setup makes it easy to select the right parameters for the system you’re working on. Logged data is instantly viewable, downloadable, and shareable with Fluke Energy Analyze Plus software so you never need to wait to finish a session before reviewing results or analyzing data.

Fluke 1770 Series Three-Phase Power Quality Analyzers Overview
Power Quality Logger

Ultimate measurement confidence

The Fluke 1770 Series are 2-in-1 devices that combine the troubleshooting functionality of a power quality meter with the robust analysis and logging capabilities of a standalone power quality analyzer—in a single, easy-to-use, handheld device.

The ‘PQ Meter’ function gives you immediate access to live onscreen data in the field so you can quickly identify potential problems while troubleshooting. The detailed ‘PQ Logging and Analysis’ function eliminates the complexity of performing power quality studies by guiding you through the setup process ensuring you’re capturing the right data every time. Couple these measurement modes with a unique measurement connection autocorrect function and you can be confident that you never need to worry about going back for a second measurement—even if you were unsure about what to look for when you started.

Powerful analysis software with easy-to-create reports

Fluke 1770 Series Power Quality Analyzers come standard with the powerful Fluke Energy Analyze Plus software, designed to eliminate the hassles found with other multi-purpose application software. Energy Analyze Plus helps you evaluate power quality data right out of the box and without extensive training.

Energy Analyze Plus makes downloading, analyzing, tracking, and reporting power quality and energy data easier than ever. Quickly compare results to historical values, benchmark against industry norms, compare measured data to local conditions, and create a more complete picture of what’s occurring across your facility, even as the data is still being collected. Energy Analyze Plus offers unified support for the Fluke 1730, 1740, and 1770 Series of Energy Loggers and Power Quality Analyzers.

  • “In-workshop” and “in-the-field” setup and download through PC application software
  • Simple data downloads using USB memory stick, WiFi, LTE, wired Ethernet, or USB cable
  • Analyze every measured detail of energy consumption and power quality state-of-health with automated reporting
  • One-touch reporting creates standardized reports conforming to standards like EN 50160, IEEE 519, GOST 33073 IEC 61000-2-2, or export data in PQDIF or NeQual compatible format or CSV for use with third-party software
  • Advanced analysis allows the user to choose any available logged parameter and create a highly customized view of measurements for advanced data correlation
Power Quality
Power Quality Logger Transient

High-speed voltage transient capture

Transients negatively impact otherwise healthy systems every day and their potential to damage your equipment can’t be underestimated. Whether your system is experiencing impulsive or oscillatory transients, the results can be devastating and cause problems ranging from insulation failures to total equipment failures. The Fluke 1775 and Fluke 1777 incorporate advanced transient capture technology to help you clearly identify high-speed voltage transients, so you have the data you need to stop them in their tracks. The Fluke 1775 Power Quality Analyzer has 1MHz sampling capability to capture fast transients, while the Fluke 1777 Power Quality Analyzer has 20MHz sampling capability to capture the fastest transients in high detail.

From traditional industrial systems to renewable energy systems to electric vehicles, we’ve got you covered

The Fluke 1770 Series was designed to be safe and easy to use in any measurement environ¬ment. The 1770 Series allows you to capture a full range of power quality variables as well as high-speed waveforms, high-speed transients, and higher frequency harmonics, all of which are instantly viewable on the large, high-resolution screen. With a best-in-class CAT IV 600 V / CAT III 1000 V overvoltage rating, these analyzers can be used at the service entrance or downstream, measuring AC and DC inputs, and harmonics measuring up to 30 kHz. With the 1770 Series you can be confident that you’ll capture the data you need to make better maintenance decisions no matter the task.

Applications177317751777
Energy surveys and load testing
Harmonic surveys
Nuisance circuit breaker tripping 
Electric utility power quality surveys 
Discovery of equipment failures caused by 8kV microsecond transients 
Discovery of equipment failures caused by 8kV nanosecond transients  
Power Quality Logger

Compliant to international standards

The Fluke 1770 Series offers the best-in-class accuracy you’ve come to expect from a Fluke Power Quality Analyzer in a future IEC 61000-4-30 Class A edition 3 compliant package. On top of that, the 1770 Series has been engineered to meet the future requirements of Class A edition, for conformance to EN 50160 and IEEE 519, so you’ll be prepared to tackle tomorrow’s measurement requirements, today.

Fluke 1770 Series Three-Phase Power Quality Analyzers

Work where, when, and how you want

No two days in the field are the same. You need a power quality analyzer that can go where you go and do what you need it to when you get there. With a full range of accessories and built-in features the Fluke 1770 Series makes it easier to get your job done. The slim ergonomic design and integrated hand strap make it easy to hold and the included hanging kit makes it easy to secure your analyzer inside a cabinet. The integrated internal power supply allows the unit to be powered directly from the measured circuit, while a 90-minute battery helps ensure you can still access and review data even when you aren’t connected to a live system.

Quickly and easily transfer data to your PC using the USB C, USB A, Ethernet, Wi-Fi, cellular network support options, depending on your requirements. With an internal GPS module and an optional double insulated antenna extension cable, for amplifying GPS signals indoors, you can easily time sync your data for more accurate troubleshooting and analysis.

Calculate current harmonics limits

When downloading data from the Fluke 1770 Series Power Quality Analyzers the included Energy Analyze Plus software package can compare measured voltage and current harmonic statistical data to different standards, like EN 50160 or IEEE 519, to determine if they exceed compliance limits. This powerful predictive maintenance feature enables current harmonics to be observed before distortion appears in the voltage allowing you to prevent unexpected failures or non-compliance situations and increase system uptime. With the proliferation of inverter-based loads and power generation, keeping current harmonics in check is becoming increasingly critical to ensure reliable power quality and avoid system downtime.

Fluke 1770 Series Three-Phase Power Quality Analyzers

What's in the box:

Fluke 1777

  • 3PHVL-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clips (set of four)
  • AC285 green alligator clip
  • MP1-3R/1B Magnetic Probes (set of four)*
  • Black 1M USB-C cable
  • Line cords (US, EU, UK, AUS, BRA)
  • FLUKE-17XX-TL blue stacking 0.18M test lead
  • Green test lead
  • WI-FI/BLE MODULE **
  • 17XX CABLE MARKER cable marker set
  • 17XX BATT W/HOUSING battery (installed)
  • MA-C8 wall outlet adapter
  • I17XX-FLEX1500/24 flexible 1500A AC current clamps (set of four)
  • 32GB micro-SD card (installed) *
  • C1777 Hard case *
* Items not included with 1775 and 1773 standard models
** Items not included with 1773 standard model

Specifications: Fluke 1770 Series Three-Phase Power Quality Analyzers

Key features

Voltage inputs
Number of inputs4 inputs, 3 phases and neutral referenced to PE (5 connectors)
Measurement category1000 V CAT III / 600 V CAT IV
Maximum input voltage1000 V rms / 1000 V dc (1700 Vpk)
Nominal voltage rangeWye and single phase: variable (50 V – 1000 V)
Delta: Variable (100 V – 1000 V)
IEC 61000-4-30 Class A compliance for the nominal voltages (Vdin) 100 V – 690 V
Input impedance10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE
BandwidthDC to 30 kHz for PQ measurements, excluding transients
Resolution24-bit synchronous sampling
Sampling frequency80 kS/s at 50/60 Hz
Scaling1:1, variable for use of potential transformers
Voltage transients
Measurement range±8 kV
Sampling rate1775: 1 MS/s
1777: 1 MS/s, 20 MS/s
BandwidthDC to 1 MHz
TriggerAdjustable trigger level. Triggers on high-frequency components > 1.5 kHz
Resolution14-bit synchronous sampling
Current inputs
Number of inputs4 inputs 3 phases and Neutral, range selected automatically to attached sensor
RangeAC1 A to 1500 A with i17XX-FLEX1500 12
1 A to 1500 A with i17XX-FLEX1500 24
3 A to 3000 A with i17XX-FLEX3000 24
6 A to 6000 A with i17XX-FLEX6000 36
40 mA to 40 A with clamp i40s-EL
4 A to 400 A with clamp i400s-EL
DC20 A to 2000 A with 80i-2010-EL clamp
BandwidthDC to 30 kHz
Resolution24-bit synchronous sampling
Sampling frequency80 kS/s at 50/60 Hz
Scaling1:1, variable
Input voltageClamp: 50 mV / 500 mV rms; CF 2.8
Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4
all at nominal probe range
Input impedance11 kΩ
Aux inputs
Wired connection with 17XX-AUX adapter
Number of inputs2
Input rangeDirect: 0 V dc to ± 10 V dc
0 V to 1000 V dc
Input impedanceDirect: 2.92 MΩ
Scale factorFormat: mx + b (gain and offset) user configurable
Displayed unitsUser configurable (up to 8 characters, for example °C, psi, or m/s)
Data acquisition voltage and current
Input mains frequencyDC, 50/60 Hz  15 % (42.5 Hz … 57.5 Hz, 51 Hz … 69 Hz)
Topologies1-φ, 1-φ IT, Split phase, 3-φ delta, 3-φ wye IT, 3-φ Aron/Blondel (2 element delta), 3-φ delta open leg, 3-φ high leg delta
Data storageFluke 1773/1775: 8 GB internal (expandable with microSD card)
Fluke 1777: 32 GB microSD card (installed)
Memory sizeTypical 10 logging sessions of 8 weeks with 1-minute intervals and 100 events.
The number of possible logging sessions and logging period depends on user requirements
Real time accuracyInternal: 3 ppm (0.26 s per day, 8 s per month)
NTP (internet time): Depending on internet latency, typical < 0.1 s absolute to UTC
GPS: < 1 ms absolute to UTC
Trend interval
Measured parameterSee operator manual
Trend intervalUser selectable: 1 sec, 3 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min
Averaging interval min/max valuesVoltage, Current: ½ cycle RMS (20 ms at 50 Hz, 16.7 ms at 60 Hz)
Aux, Power: 200 ms
Total harmonic distortionTHD for voltage and current is calculated on 50 harmonics
Power quality measurements
Measured parameterSee operator manual
Harmonicsh0 … h50
% fund and RMS for voltage, current and power
Phase angles for voltage and current up to h11
Interharmonicsih0… ih50
% fund and RMS for voltage and current
Supraharmonics2–9 kHz with 200 Hz bins
9–30 khz with 2 kHz bins
RMS for voltage and current
Harmonics measurement methodGrouped, sub-grouped and single harmonic bins according to IEC 61000-4-7.
Method selected automatically based on configured PQ standard or user configurable.
Total harmonic distortionCalculated on up to 50 harmonics (depends on selected PQ standard)
Mains signaling2 frequencies in the range from 110 Hz to 3000 Hz
EventsVoltageDip, swell, interruption, rapid voltage change, mains signaling, waveshape deviation, transients
CurrentInrush current
Triggered recordingsHalf cycle RMS of voltage and current for 10 s
Waveform of voltage and current for 10/12 cycles
Mains signaling: 200 ms RMS of mains signaling voltage up to 120 s
Transients: Waveform of voltage
(Fluke 1777: 1 MS/s or 20 MS/s, 500,000 pts, Fluke 1775: 1 MS/s, 25,000 pts)
Standard compliance
PowerIEEE 1459
HarmonicsIEC 61000-4-7: Class 1
IEEE 519 (short time and very short time harmonics)
FlickerIEC 61000-4-15 Class F1
Power qualityIEC 61000-4-30 Class A, IEC 62586 PQI-A-PI
Power quality complianceEN 50160 + GOST + NEQUAL + NETCODE + FOL
Interfaces
Ethernet1 Gbit/s 1000BASE-T
USB type AUSB 2.0 high speed for USB flash drives to transfer measurement data, firmware updates and license installation. Max. supply current: 500 mA
USB-CUSB 2.0 high speed for data download to PC and calibration (requires USB type A to USB-C or USB-C to USB-C cable)
Auxiliary power supply for the Analyzer (requires USB C power adapter PD 2.0 or higher with 9 V 1.8 A support)
USB 3.0 super-speed for USB-C flash drives to transfer measurement data, firmware updates and license installation. Max. supply current: 900 mA
WiFi/BLE module1802.11 ac 2.4 GHz / 5 GHz, support for concurrent access point and client mode
Bluetooth 5.0/BLE
Antenna: Internal and external2
LTE/4G module3LTE-A Cat 12
Worldwide LTE-A and UMTS/HSPA+ coverage
Antenna: External2
GPSMCX connector to attach a GNSS antenna for GPS/GLONASS2
1 Not in 177X/BASIC versions
2 Requires 5m extension cable, Fluke p/n 5263915
3 Availability and supported providers vary by country. Check with your local Fluke representative.

Electrical measurement accuracy

ParameterRangeResolutionIntrinsic Accuracy at Reference Conditions
% of Reading + % of Full Scale
Voltage1000 V0.1 V0.1 % of nominal voltage
in accordance with
IEC 61000-4-30 Class A1,2
  ±(0.04 % + 0.004 %)3
Voltage dips and swells-0.1 V0.2 % of Vnom1,2
Voltage transients±8 kVpk-±5 % +0.25 %)
Voltage harmonics/interharmonics100 %0.1 % / 0.1 mV≥1 % Vnom1:  ±2.5 % of rdg.
<1 % Vnom1:  ±0.025 Vnom
THD on voltage100 %0.1 % / 0.1 V±(2.5 % + 0.5 %)
Voltage distortions 2-9 kHzMax 100 V0.1 mV±(2.5 % + 0.1 V)
Voltage distortions 9-30 kHzMax 100 V0.1 mV±(2.5 % + 0.1 V)
Current
(Rogowski clamp mode)
With iFlex 1500 A,
i17XX-FLEX1500 24
150 A
1500 A
0.01 %
0.1 A
±(1 % + 0.02 %)
With iFlex 3000 A,
i17XX-FLEX3000 24
300 A
3000 A
0.01 A
0.1 A
±(1 % + 0.03 %)
With iFlex 6000 A,
i17XX-FLEX6000 36
600 A
6000 A
0.1 A
1 A
±(1.5 % + 0.03 %)
With AC clamp 40 A,
i40s-EL
4 A
40 A
0.001 A
0.01 A
±(0.7 % + 0.02 %)
With AC clamp 400 A,
i400s-EL
40 A
400 A
0.01 A
0.1 A
±(2 % + 0.2 %)
 ±(0.7 % + 0.1 %)
With AC/DC clamp
2000 A, 80i-2010s-EL
200 A
2000 A
0.01 A
0.1 A
±(0.8 % + 0.2 %)
Current min/max100 %defined by accessoryx2 of intrinsic accuracy
Current harmonics/interharmonics100 %0.1 % / 0.01 A≥3 % Inom:  ±2.5 % of rdg.4
<3 % Inom:  ±0.15 % of Inom
THD on current100 %0.1 %±(2.5 % + 0.5 %)
Frequency42.5 Hz … 69 Hz0.001 Hz±0.01 Hz
Voltage unbalance100 %0.1 %±0.15 %
Current unbalance100 %0.1 %±0.15 %
Flicker Pinst, Pst, Plt0 to 200.015 %
Mains signaling voltageUp to 3 kHz
0-15 % of Vnom
0.1 V / 0.1 %1-3 % Vnom: ±0.15 % of Vnom
3-15 % Vnom: ±5 % of rdg.
AUX input±10 V0.1 mV±(0.2 % + 0.05 %)
1 Nominal voltage in the range of 100 V to 690 V. Also known as Udin.
2 0 °C to 45 °C: Intrinsic Accuracy x2. Outside of 0 °C to 45 °C: Intrinsic Accuracy x3
3 Only for calibration laboratories
4 With iFlex 1500A, I17XX-FLEX1500 24

Power/Energy

ParameterDirect Input1Clamp i40S-EL
Power range W, VA, varClamp: 50 mV / 500 mV
Rogowski: 15 mV / 150 mV
4 A / 40 A
Clamp: 50 W / 500 W
Rogowski: 15 W / 150 W
4k W / 40 kW
Max. resolution W, VA, var0.1 W1 W / 10 W
Phase (voltage to current)1±0.2°±1°
ParameteriFlex 1500A, I17XX-FLEX1500 24iFlex 3000A, I17XX-FLEX3000iFlex 6000A, I17XX-FLEX6000
Power range W, VA, var150 A / 1500 A300 A / 3000 A600 A / 6000 A
150 kW / 1.5 MW300 kW / 3 MW600 kW / 6 MW
Max. resolution W, VA, var0.1 kW / 1kW1 kW /10 kW1 kW / 10k W
Parameter I17XX-FLEX1500 24I17XX-FLEX3000I17XX-FLEX6000
Active power PPF ≥ 0.99150 A / 1500 A300 A / 3000 A600/6000 A
1.2 % + 0.005 %1.2 % + 0.0075 %1.7 % + 0.0075 %
Active energy Ea0.1 ≤ PF < 0.99(1.2+√(1-PF2)/(2 PF)) % + 0.005 %(1.2+√(1-PF2)/(2 PF)) % + 0.0075 %(1.7+√(1-PF2)/(2 PF)) % + 0.0075 %
Apparent power S
Apparent energy Eap
0 ≤ PF ≤ 11.2 % + 0.005 %1.2 % + 0.0075 %1.7 % + 0.0075 %
Reactive power Q
Reactive energy Er
0 ≤ PF ≤ 12.5 % of measured apparent power/energy
Additional uncertainty
(% of power high range)
VP-N > 250 V0.02 %0.02 %0.02 %
Phase (voltage to current)-0.28°0.28°0.28°

1 Nominal voltage in the range of 100 V to 690 V. Also known as Udin.

Reference Conditions

Environmental: 23 °C ±5 °C, instrument operating for at least 30 minutes, no external electrical/magnetic field, RH <65 %

Input conditions: Cos Φ/PF=1, Sinusoidal signal f=50/60 Hz, power supply 120 V/230 V ±10 %.

Current and power specifications: Input voltage >100V

Input current > 10 % of current range

Primary conductor of clamps or Rogowski coil in center position

Temperature coefficient: Add 0.1 x specified accuracy for each degree °C above 28 °C or below 18 °C

General specifications

Key features
WarrantyAnalyzer: 2 years (battery not included)
Accessories: 1 year (including battery)
Calibration cycle2 years
Size (L X W X HD)28.0 cm x 19.0 cm x 6.2 cm (11.0 in x 7.5 in x 2.4 in)
Weight2.1 kg (4.6 lb)
Anti-theft protectionSlot to support Kensington lock
Environmental specifications
Operating temperature range-10 °C to 50 °C
Storage temperature range-20 °C to 60 °C
Operating humidityIEC 60721-3-3: 3K5, modified:
-10 °C to 30 °C: ≤95 %, no condensation or ice
35 °C: 70 %
40 °C: 55 %
50 °C: 35 %
IP RatingIEC 60529: IP50
VibrationIEC 60721-3-3 / 3M2
Power supply
Voltage range100 V – 600 V -15 % / +10 % (85 V … 660 V)
Power consumptionMax. 40 VA
Mains frequency50/60 Hz (42.5 Hz … 69 Hz)
UPSLi-Ion battery BP1770 with extended temperature range, customer replaceable
On-battery runtime: 1.5 hours
Safety
GeneralIEC 61010-1: Pollution Degree 2
Power supplyOvervoltage Category IV 600 V
With Mains Adapter MA-C8: Overvoltage Category II 300 V
MeasurementIEC 61010-2-030: CAT IV 600 V, CAT III 1000 V
Altitudes 2000 m to 4000 mDerate to:
Power Supply: Category IV 300 V
With MA-C8 Adapter: Category II 150 V
Measurement: CAT IV 300 V, CAT III 600 V, CAT II 1000 V

Models: Fluke 1770 Series Three-Phase Power Quality Analyzers

Fluke 1773 Power Quality Analyzer
FLUKE-1773, POWER QUALITY ANALYZER
Part#: 5117269
UPC#: 0 95969 91766 7

Packaging Includes

  • FLUKE-1773 Power Quality Analyzer
  • I17XX-FLEX1500 24 iFLEX 1500A 24 IN (2.0M) current probes (set of four)
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clips (set of four)
  • AC285 green alligator clip
  • Black 1M USB-C cable
  • Line cords (US, EU, UK, AUS, BRA)
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
Fluke 1773/Basic Power Quality Analyzer (No probes)
FLUKE-1773/BASIC, POWER QUALITY ANALYZER
Part#: 5272757
UPC#: 1 95112 01850 7

Packaging Includes

  • FLUKE-1773 Power Quality Analyzer
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clips (set of four)
  • AC285 green alligator clip
  • Black 1M USB-C cable
  • Line cords (US, EU, UK, AUS, BRA)
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
Fluke 1775 Power Quality Analyzer
FLUKE-1775, POWER QUALITY ANALYZER
Part#: 5117278
UPC#: 0 95969 91767 4

Packaging Includes

  • FLUKE-1775 Power Quality Analyzer
  • I17XX-FLEX1500 24 iFLEX 1500A 24 IN (2.0M) current probes (set of four)
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clips (set of four)
  • AC285 green alligator clip
  • Black 1m USB-C cable
  • Line cord
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • MP1-3R/1B Magnet Probe set
  • FLUKE-174X-HANGER magnetic hanging kit
  • FLUKE-177X-4204, WI-FI/BLE module
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
  • Black soft case
Fluke 1775/Basic Power Quality Analyzer (No probes)
FLUKE-1775/BASIC, POWER QUALITY ANALYZER
Part#: 5272784
UPC#: 1 95112 01853 8

Packaging Includes

  • FLUKE-1775 Power Quality Analyzer
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clip
  • AC285 green alligator clip
  • Black 1m USB-C cable
  • Line cord
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
  • Black soft case
Fluke 1777 Power Quality Analyzer
FLUKE-1777, POWER QUALITY ANALYZER
Part#: 5126630
UPC#: 0 95969 91901 2

Packaging Includes

  • FLUKE-1777 Power Quality Analyzer
  • I17XX-FLEX1500 24 iFLEX 1500A 24 IN (2.0M) current probes
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clip
  • AC285 green alligator clip
  • Black 1m USB-C cable
  • Line cord
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • MP1-3R/1B Magnet Probe set
  • FLUKE-174X-HANGER magnetic hanging kit
  • FLUKE-177X-4204, WI-FI/BLE module
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
  • FLUKE-1777 HARDCASE rolling hard case
Fluke 1777/Basic Power Quality Analyzer (No probes)
FLUKE-1777/BASIC, POWER QUALITY ANALYZER
Part#: 5272819
UPC#: 1 95112 01856 9

Packaging Includes

  • FLUKE-1777 Power Quality Analyzer
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clip
  • AC285 green alligator clip
  • Black 1m USB-C cable
  • Line cord
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
  • FLUKE-1777 HARDCASE rolling hard case
FLUKE-1777/FPC

Fluke 1777 Power Quality Analyzer Bundled with Premium Care 1-Year Standard Plan

Includes:

  • Premium Care 1-Year Standard Plan
  • FLUKE-1777 Power Quality Analyzer
  • I17XX-FLEX1500 24 iFLEX 1500A 24 IN (2.0M) current probes
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clip
  • AC285 green alligator clip
  • Black 1m USB-C cable
  • Line cord
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • MP1-3R/1B Magnet Probe set
  • FLUKE-174X-HANGER magnetic hanging kit
  • FLUKE-177X-4204, WI-FI/BLE module
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
FLUKE-1775/FPC

Fluke 1775 Power Quality Analyzer Bundled with Premium Care 1-Year Standard Plan

Part#: 5335300
UPC#: 7 54082 15531 7

Includes:

  • Premium Care 1-Year Standard Plan
  • FLUKE-1775 Power Quality Analyzer
  • I17XX-FLEX1500 24 iFLEX 1500A 24 IN (2.0M) current probes (set of four)
  • FLUKE-17XX flat cable voltage test lead 3-phase+N
  • AC285 black alligator clips (set of four)
  • AC285 green alligator clip
  • Black 1m USB-C cable
  • Line cord
  • FLK-17XX 0.18M test lead set
  • Green test lead
  • MP1-3R/1B Magnet Probe set
  • FLUKE-174X-HANGER magnetic hanging kit
  • FLUKE-177X-4204, WI-FI/BLE module
  • Cable marker set (for voltage and current)
  • FLUKE-174X-MA-C8 wall outlet adapter
  • Black soft case
FPC1S-FPQ170-1

Premium Care 1-Year Standard Plan for Fluke 177X Series PQ Analyzer

Part#: 5326110
UPC#: 1 95112 03834 5

Includes:

Premium Care 1-Year Standard Plan

FPC3S-FPQ170-1

Premium Care 3-Year Standard Plan for Fluke 177X Series PQ Analyzer

Part#: 5326122
UPC#: 1 95112 03835 2

Includes:

Premium Care 3-Year Standard Plan

FPC1G-FPQ170-1

Premium Care 1-Year Gold Plan for Fluke 177X Series PQ Analyzer

Part#: 5326809
UPC#: 1 95112 03843 7

Includes:

Premium Care 1-Year Gold Plan

FPC3G-FPQ170-1

Premium Care 3-Year Gold Plan for Fluke 177X Series PQ Analyzer

Part#: 5326811
UPC#: 1 95112 03844 4

Includes:

Premium Care 3-Year Gold Plan

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 24.66ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.74ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.
Chat with ourFluke assistant
Clear Chat