Search results

The Fluke 3562 vibration monitoring sensor uses a batteryless sensor and software to continuously screen vibration readings all of your assets.

Continuously monitor and analyze vibration readings for production-critical assets.

Eliminate the hassle of setting up complex measurements. Simplify your troubleshooting process.

Measure 4 to 20 mA signals without breaking the loop

Ideal for solar installations and troubleshooting PV arrays.

All-in-one solar irradiance meter ideal for PV installation and maintenance.

Accurately and safely troubleshoot energized and de-energized wires up to CAT IV 600V

Accurately and safely troubleshoot energized and de-energized wires up to CAT IV 600V

The slim and thin jaw can easily fit into tightly packed wires. The lightweight and compact design allows you to carry it around in your pocket

Get more out of your ScopeMeter 190 Series III and 120B Series with FlukeView-2 ScopeMeter Software

Get faster precision laser alignment for industrial machines.

Join our three-day course in advanced topics in temperature metrology. Validate, refresh or expand your knowledge.

Versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Fluke 417D/62 MAX+ Laser Distance Meter HVAC Kit - troubleshoot electrical/HVAC problems. Dust and water-resistant: IP54 rated. IR thermometer tests for overheating; meter measures distance, area, and volume.

Copper qualification tester kit troubleshoots and qualifies Ethernet network cabling.

Get accurate, precise measurements. Portable, lightweight power analyzer with 10 hours of battery life.

Fluke Calibration’s PPCH-G™ is a gas pressure controller/calibrator for gas pressure operation from 1 to 100 MPa & has FLASH memory for software updates.

Pressure Transducer Calibration - Fluke Calibration offers digital pressure calibrators that are rugged, reliable, versatile, and include flash memory for software updates.

The Fluke 700SC is used to communicate with the Fluke 726, the Fluke 754, and the Fluke Calibration 3130. It allows you to connect these products to a PC. It also can connect a Fluke Calibration dry-well with a 754.

High current adapter to connect two shunts in series for measurement (LC to LC)

NetDAQ Data Acquisition Units are ideal for small-to-medium scale process monitoring and test systems. Efficiently measure, record & analyze. Learn more.

LC male to spade lug terminals

Fluke DAQ version 6.0 is a powerful & versatile application for quick & easy configuration, data logging and data analysis using Fluke Calibration instruments.

The FPG8601 piston gauge from Fluke Calibration addresses the need for a means of maintaining long term traceability with very low uncertainty in the pressure range under that covered by conventional piston gauges.

The 6003A Three Phase Electrical Power Calibrator from Fluke Calibration offers compact, accurate three-phase power in a single, easy-to-use instrument.

The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.

MET/TRACK® Calibration Asset Management Software is the powerful test & measurement database management system for MET/CAL® Plus.

Fluke Calibration 8508A is an 8.5-digit resolution multi-meter designed for metrologists, providing superior accuracy & stability over a wide range of measurements.

Temperature sensor calibration software from Fluke Calibration is Windows based, easy to use, and automates data collection and report generation for temperature calibration laboratories.

Fluke Calibration's RF reference sources are designed mainly for RF calibration including spectrum analyzer, network analyzer & attenuator calibration.

5320A multifunction DC calibrator is an accurate, flexible instrument that allows you to calibrate many different models of electrical testers efficiently.

5522A is a resistance calibrator that calibrates a wide variety of electrical test equipment, provides reverse power protection and is remarkably affordable.

An accurate & economical solution if you need to calibrate digital multimeters, clamps, thermometers & other electronic test instruments. Learn more.

The Fluke 5520A multi-product calibrator has been upgraded to the 5522A. By clicking, you’ll go to the old 5520A page that has a link to the new 5522A.

Trend Link V10 is a trend display program that works with the Full version of FlukeDAQ 6.0 (2680A-APSW) collecting and displaying data from any combination of Fluke Data Acquisition products.

5700A/EP from Fluke Calibration is an upgrade service that extends both the performance & service life of your existing 5700A Multifunction Calibrator.

Fluke Calibration 5141, 5142 and 5144 molbox RFM gas flow calibrator kits feature molbox RFM and molbloc-L configurations optimized to cover a very wide workload combined with molstic-L and other interconnect hardware needed for a complete calibration system.

The Fluke 525A temperature / pressure calibrator has been replaced by the 525B. By clicking, you’ll go to the old 525A page that has a link to the new 525B.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

The Fluke 7004N & 7010N Nanoscan Volt Maintenance Systems have been upgraded to the Fluke 734A voltage reference and DC voltage standard. Learn more.

397 Universal Waveform Generator from Fluke Calibration offers versatility, high resolution, wide frequency range, and a great performance-to-price ratio.

The 5502A Multi-Product Calibrator is the ideal electrical calibrator for metrology professionals who calibrate low-to-medium accuracy electrical instruments

The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.

Fluke Calibration offers PPCH™ Automated Pressure controller/Calibrator for Hydraulic Pressure Applications.

The modular, flexible 6270A Pressure Controller/Calibrator by Fluke Calibration lets you dramatically simplify the task of pneumatic pressure calibration.

The low pressure transducer is calibrated by pressure transducer calibration using the Fluke Calibration - Low Pressure Digital Pressure Calibrator Model 7250LP.

Fluke 7250, 7250i, 7250xi and 7250LP (formerly Ruska) digital pressure controller calibrators. Official Fluke & Ruska. Unmatched performance. Learn more

The Model 7050 High Precision Digital Indicator from Fluke Calibration is a high precision instrument used for pressure measurement and as a calibration system.

The Fluke Calibration 7250Sys Multi-range Pressure Calibration System is a complete, turn-key system ideally suited for the test and calibration of pressure sensors, pressure transducers, pressure transmitters, pressure switches and pressure gauges.

Model 720A Kelvin-Varley Divider is a high-resolution primary ratio standard with absolute linearity of 0.1 ppm, temperature coefficient of linearity of 0.1 ppm/ºC, and self-calibration capability.

Achieve precise calibration for oscilloscopes up to 4GHz with the Fluke 9500C. Features Active Head Technology™ for efficient, automated multi-channel calibration.

GPS frequency standards by Fluke Calibration have accurate gps frequency references that can be installed, monitored & managed virtually from any location.

The 27 GHz Fluke Calibration 96270A RF Reference Source is the simplest, most accurate and cost effective single instrument for calibrating spectrum analyzers and RF power sensors and more.

The Fluke Calibration 96040A RF Reference Source enables you to simplify your RF calibration system by replacing many of the instruments and accessories that make up your current system.

A40B Series Precision Current Shunts from Fluke Calibration exhibit excellent self-heating power coefficient, stability & low temperature coefficient.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

The Fluke Calibration 2700G series provides accurate pressure measurements up to 0.02% of full scale with an easy-to-use interface and rugged design.

Fluke Calibration 5960A calculates argon triple point using a reproducible process, produces a 30-hour temperature plateau & increases SPRT calibration efficiency.

The 7526A Precision Process Calibrator is a multifunction calibrator offering the best balance of economy and accuracy for temperature & pressure calibration.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Fluke Calibration's 5686 SPRT covers temperatures from –260 °C to 232 °C. It complies completely with ITS-90 & is small yet reliable & stable.

The 5790B AC Measurement Standard is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

For more information: Barbara Ellis (425) 446-4949 barbara.ellis@fluke.com The next generation of wireless vibration monitoring is here! Fluke Reliability introduces the Fluke 3563 Analysis Vibration Sensor: reveal machine fault causes quickly to prevent equipment downtime Everett, Wash., June 24, 2021 – Fluke Reliability, an operating company of Fluke Corporation, is proud to announce its newest product, the Fluke 3563 Analysis Vibration Sensor system. Vibration monitoring helps maintenance...

New tester combines the company’s advanced cable performance technology with switch diagnostics

Everett, Washington, February 25, 2020-- Fluke Reliability today announced that its eMaint Computerized Maintenance Management System (CMMS) has been awarded the 2020 Gartner Peer Insights Customers’ Choice distinction for Enterprise Asset Management (EAM) Software. "We are honored to be recognized as a Gartner Peer Insights Customers’ Choice solution,” said Ankush Malhotra, Vice President and General Manager of Fluke Reliability. “Great customer relationships are paramount to us, so to be...

For more information:Warren PaynePayneSpencer(253) 653-0522warren@paynespencer.comSurvey also reveals a significant number of respondents either retiring or changing professions in the next five years, reducing the number of skilled techniciansEVERETT, Wash., Oct. 26, 2022 – Calibration services — in-house as well as calibration service providers — are being driven mostly by the demands of the electrical segment where there are increasingly more stringent requirements on quality assurance....

For more information:Warren Payne(253) 653-0522warren@paynespencer.comThe company honors John Fluke’s legacy of giving customers ‘a little bit more than they paid for’ and always building toward the futureEVERETT, Wash., March 9, 2023 – In 1948, the John Fluke Engineering Company was founded in a basement workshop in Springfield, Conn. A U.S. Navy World War II veteran and graduate of the Massachusetts Institute of Technology, John Fluke pioneered a highly accurate benchtop power meter which...

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N (Recalled Cable). We have received your information, and your order is in process. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have...

New wire tracers can quickly and accurately pinpoint energized and de-energized wires, breaks, and shortsEVERETT, Wash., June 27, 2023 – Tracing and troubleshooting wiring issues can be a frustrating, time consuming — and sometimes dangerous — job. The new Fluke 2052 Advanced and 2062 Advanced Pro Wire Tracers accurately and safely troubleshoot energized and de-energized wires in residential, commercial, and industrial environments up to CAT IV 600 V — the highest protection available on...

People are using more electricity today than ever before as the world reduces its reliance on fossil fuels. As a result, electricity is quickly becoming the energy resource of choice thus increasing the demand for skilled electricians. From the rise of electric vehicles to the search for sustainable energy solutions, the electrical industry is at the center of it all. Yet, the availability of qualified workers is failing to keep pace with the fast-growing industry.It’s a challenge that organizations...

For more information:Warren Payne(253) 653-0522warren@paynespencer.comThe powerful alignment tool makes it practical to align most machines in the facility, not just a select fewEVERETT, Wash., Jan. 12, 2023 – Misalignment causes at least half of all damage to rotating machinery, but instead of fixing the problem, teams often just treat the symptoms of misalignment by replacing bearings, couplings, and seals because they think alignment takes too long. The new Fluke 831 Laser Shaft Alignment Tool...

For more information:Warren PaynePayneSpencer(253) 653-0522warren@paynespencer.comThe 5560A defines a new class of multi-product electrical calibrators with a host of new technologies to meet the demands of modern calibration labsEVERETT, Wash., Jan. 17, 2023 — Calibration technicians are facing increasing workloads with devices that require even more accuracy. The new Fluke Calibration 5560A Multi-Product Calibrator meets the demands of modern workloads by enabling technicians to calibrate more...

Support related questionsProduct related questionsCalibration related questionsLearning and training related questionsGeneral topic questionsSupport-related questionsHow can I request a repair for my Fluke meter?Visit our support page: Request RepairCan I find software downloads on your website?Yes, you can find software downloads here: Software DownloadsWhere can I find replacement parts for specific Fluke models?For replacement parts, please visit: Replacement PartsHow can I connect my Fluke device...

TechGirls is a not-for-profit lab conducting social and scientific research about women’s labor market participation in Science, Technology, Engineering, and Mathematics (STEM) fields. To extend their reach and help more people, TechGirls collaborates with artists and communities to present their study findings in a beautiful, accessible, and compelling way.Saadia Muzaffar, President and co-founder, along with their sibling (and co-founder) Saira Muzaffar, saw and heard the everyday career struggles...

Based on our data, the profile that emerges is that immigrant women educated and experienced in STEM fields tend to be drivers of the decision in choosing Canada, and their decision is in large part based on non-economic factor of personal well-being, safety, security, and mobility.67% of our participants were the primary applicants on their immigration file, which means that in Canadian Immigration’s points-based system, their labour market fit was deemed highly relevant, with their skills assessed...

By Sean Anderson, Fluke Application SpecialistIf you work in HVAC, you already know your tools can make or break your day. There’s nothing worse than troubleshooting a stubborn system with a multimeter that wasn’t built for the job. That’s why I always keep the Fluke 116 Digital HVAC Multimeter on my belt. It’s compact, accurate, and, most importantly, built with HVAC techs in mind.Let’s break down why this tool is a must-have and how it makes long days in the field a little easier.Learn...

This application note discusses the importance of temperature sensors in oil exploration, the types used, and their applications in the field.

By Will White, Fluke Solar Application SpecialistOptimizing the efficiency of bifacial solar modules through precise I-V curve measurement is key to maximizing energy yield and return on investment (ROI) for solar professionals. Compared to traditional monofacial modules, bifacial solar modules have gained popularity in the solar industry due to their ability to capture sunlight from both sides, potentially increasing energy yield.Despite these advancements, the capacity rating under Standard Test...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

5560A/5550A/5540A Firmware (update)What's NewThe latest firmware updates for the Fluke 5560A/5550A/5540A bring some sought-after features that customers have requesting. The full list of key changes can be found below, but here are a few new additions to highlight:Control up to three 52120A Transconductance Amplifiers via rear panel connectorUsing the rear panel connector on your Fluke 5560A/5550A/5540A, you can now remotely control up to three 52120A Transconductance Amplifiers through your 5560A/5550A/5540A...

.super-custom .fluke-icon { margin-right: 20px; font-size: 2.2rem; } .super-custom a { color: #212121; text-decoration: none; } Thank you for contacting Fluke! We’ll contact you when CableHealth becomes available.   Join the Fluke Community You’ll get: Fluke discounts, promotions and the latest news Innovative tips on using Fluke products Exclusive product previews and more ‍‍ ‍‍ ‍‍ ‍‍

The Fluke Calibration 5790B AC Measurement Standard is a multi-purpose AC measurement and transfer standard designed for the most demanding calibration applications. It combines the accuracy you would expect from a thermal transfer standard with the ease of use of a digital multimeter.Absolute AC voltage measurement uncertainties are as low as 24 ppm for one year in a 23 °C ± 5 °C environment. The 5790B in combination with the Fluke Calibration A40B Current Shunts allow you to make absolute or...

The competition honors innovative products that increase efficiency and safety of mechanical and electrical installations EVERETT, Wash., May 8, 2019 – The Fluke® T6-1000 Electrical Tester won the 2019 Best New Product Award in the Protective Tools, Hardware, and Equipment category at the Mécanex/Climatex/Expolectriq/Éclairage (MCEE) Show held in Montréal in April. The MCEE New Products Competition recognizes the most innovative products that increase the efficiency and safety of mechanical...

Fluke ruggedness, safety, and ergonomics are now available in its new line of 11 premium 1000 volt-rated insulated hand toolsEVERETT, Wash., May 28, 2019 – Electricians and facility maintenance technicians should ideally work on de-energized electrical equipment, but that isn’t always possible, so their hand tools should provide as much protection as possible. The new Fluke™ 1000 V Insulated Hand Tools are designed to keep workers safe in hazardous areas and are rugged enough to use in the...

Thermocouples are often the go-to device for temperature measurement. They’re fast, simple to use, and accurate — everything you look for in a piece of measurement equipment. However, thermocouples are only able to operate due to the Seebeck effect, the phenomenon in which a temperature difference between two points creates a voltage. Fluke 6332A /7342A Temperature Calibration BathsThis article will explain the Seebeck effect, its history, and how Seebeck coefficients affect thermocouples.Seebeck...

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

PressCal Software Demo Version (.zip)Download size: 2.17 MBMenu driven, easy to use softwareMaintain multiple Deadweight Tester filesPressure equivalent calculations with all corrections appliedAutomatic generation of calibration certificatesPre-loaded calibration dataTwelve pressure unitsWindows 95 or higher running on a 486 PC (minimum) 

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...