Tiếng Việt Vietnam

Fluke 805ES

Tính năng chính

  • Low-profile 90-degree sensor body allows the sensor to get into tight spots
  • Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed
  • Powerful "U" shaped magnet mount creates a firm connection to flat, or curved measurement surfaces
  • Rugged, sealed cable connector with strain relief tail reduces cable wear
  • Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment
  • Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter

Tổng quan sản phẩm: Fluke 805ES

External Vibration Sensor for the 805 Vibration Meter

The Fluke 805ES is an external vibration sensor that is ideal in situations for which it is either difficult or impractical to use the onboard vibration sensor tip of the 805 Vibration Meter. The 805ES allows you to take measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in out-of-reach places where it is difficult to apply sufficient manual pressure to the 805 Vibration Meter.

Thông số kỹ thuật: Fluke 805ES

Measurement range7 g pk (68.7 m/s² pk)
Frequency range0 to 6000 cpm (0 to 100 Hz)
Relay3A Form C 480 VAC
Relay (Contacts) (DPDT)Normally open / closed
Temperature range (Operating)-13 to 140°F (-25 to 60°C)
Enclosure ratingIP66
Size (Width x Height x Depth)4.35 x 3.30 x 4.35 in (110.5 x 83.8 x 110.5 mm)
Weight2.5 lb (1.134 kg)
Sensing elementMagnet
Housing materialAluminum alloy
Electrical connectorScrew terminals
Screw terminal wire size24-14 AWG (0.2 - 2.5 mm²)
Cable input3/4-14 NPT
Mounting hole size0.25 in (6.4 mm)
Sensing geometryInertial element

Model: Fluke 805ES

Fluke 805ES

External Vibration Sensor for 805 Vibration Meter

Hãy mua ngay