Fluke i2000PQ4 Current Clamp, 4-pack
Model#: i2000FLEXPQ4 Part#: 2406566 UPC#: 0 95969 28455 4
Discontinued
This product is discontinued or reclassified
Fluke suggests:Fluke i3000 Flex AC Current Clamp, 4 Pack
Product overview: Fluke i2000PQ4 Current Clamp, 4-pack
Very large, flexible AC current clamps
A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.
- This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
- Each clamp has two ranges: 200 A & 2000 A, 1 or 10 mV/ Amp output
- Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
- Maximum conductor Ø160 mm
- CAT III 600 V safety rating
Specifications: Fluke i2000PQ4 Current Clamp, 4-pack
| Specifications | |
| Nominal current range | 200 A 2000 A |
| Continuous current range | 2 A - 200 A 20 A - 2000 A |
| Maximum non-destructive current | 4000 A |
| Lowest measurable current | 2 A |
| Basic accuracy | 1% F.S. (48-65 Hz) (% reading + floorspec) |
| Useable frequency | 1 Hz - 20 kHz |
| Output level(s) | 10 mV/A 1 mV/A |
| Safety Specifications | |
| Safety | CAT III, 600 V |
| Maximum voltage | 600 V AC |
| Mechanical and General Specifications | |
| Warranty | 1 year |
| Battery life | 9 V, >100 h. |
| Maximum conductor diameter | 160 mm |
| Output cable length | 2.3 m |
| BNC adapter | Yes |
| BNC to banana adapter included | Yes |
Models: Fluke i2000PQ4 Current Clamp, 4-pack
i2000FLEXPQ4
Fluke i2000PQ4 Current Clamp, 4-pack
UPC#: 0 95969 28455 4