What's in your toolbox? Yuengling Tampa Brewery
|Fluke thermal imager||Detecting possible problems in motors and mechanical equipment (such as an overheated motor on a spent grain pump).|
|Fluke 810 Vibration Tester||Identigying bearing problems in rotation equipment, such as blower motors and pumps.|
Investigating possible problems detected with the thermal imager.
|Fluke 1735 Three-Phase Power Logger||Comparing current draw against rotational speed and output pressure on positive displacement pumps to help verify bearing problems detected with a Fluke 810 Vibration Tester.|
|Fluke 9040 Phase Rotatio Indicator||Verifying correct connections in three-phase systems.|
|Fluke 744 Documenting Process Calibrator||Verifying the performace of temperature and pressure measurement instruments.|
Viewing and changing device parameters in HART-compatible instruments.
|Fluke 707 Loop Calibrator||Verifying that analog PLC cards are reading signals and working properly.|
|Fluke 700PTP-1 Pneumatic Test Pump||Delivering air at known pressure to calibrate instruments and sensors.|
|Fluke 322 Clamp Meter||Checking current draw and power consumption.|
|Fluke 771 Milliamp Process Clamp Meter||Checking instrument and control signals without breaking the circuit or interrupting the process.|
|Fluke i3000s Flex AC Current Clamp||Measuring currents of up to 1,500 amps through any leg of a substation.|
|Fluke Networks test tools||Testing and repairing the Ethernet network that links 60 programmable logic controllers (PLCs) in the brewery.|