Search results

The Fluke 289/ i400 AC Current Clamp Combo Kit is an industrial multimeter service kit. Together, they help solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment.

Calculate the cost of wasted energy, prevent downtime, and troubleshoot power quality with the Fluke 434-II and 435-II Power Quality Analyzers.

Locate potential mechanical problems in conveyors and partial discharges in electric grids.

The Fluke 3562 vibration monitoring sensor uses a batteryless sensor and software to continuously screen vibration readings all of your assets.

Turn any Fluke Calibration multi-channel thermometer readout into a real-time data logger with LogWare II.

9117 Annealing furnace from Fluke Calibration guards against contamination, anneals both SPRTs & HTPRTs & is fully programmable.

Continuously monitor and analyze vibration readings for production-critical assets.

Fluke Calibration's RF reference sources are designed mainly for RF calibration including spectrum analyzer, network analyzer & attenuator calibration.

The 6003A Three Phase Electrical Power Calibrator from Fluke Calibration offers compact, accurate three-phase power in a single, easy-to-use instrument.

The 6135A/PMUCal Phasor Measurement Unit Calibration System is the only fully automated and traceable PMU calibration system available today.

Trend Link V10 is a trend display program that works with the Full version of FlukeDAQ 6.0 (2680A-APSW) collecting and displaying data from any combination of Fluke Data Acquisition products.

6105A and 6100B electrical power calibrator from Fluke Calibration has high accuracy for calibrating secondary standard energy meters & type test applications.

The 1524 Reference Thermometers from Fluke’s Hart Scientific Division measure, graph, and record PRTs, thermocouples, and thermistors.

The modular, flexible 6270A Pressure Controller/Calibrator by Fluke Calibration lets you dramatically simplify the task of pneumatic pressure calibration.

The Fluke 287 electronics multimeter allows you to log and zoom in on problems. Now compatible with the Fluke Connect mobile app.

Designed for capturing power quality measurements in avionic and military systems, Fluke 437 Series II is the must-have 400 Hz Quality Analyzer.

The 1523 Reference Thermometer from Fluke’s Hart Scientific Division measures, graphs, and records PRTs, thermocouples, and thermistors.

Turn any Fluke Calibration single-channel handheld or Tweener readout into a real-time data logger with LogWare. It’s the easiest data acquisition program you’ll ever use.

Get stunning 640 x 480 resolution thermal images and surprising affordability.

Troubleshoot, quantify energy usage, perform quality of service surveys and create detailed reports with included Fluke Energy Analyze plus software.

The Fluke 2680 Series data acquisition systems combine the best of lab precision with the rugged flexibility required in rapidly changing industrial applications.

Metrology can be defined simply as the science of measurement, but it’s rarely that simple in practice. Measurements touch nearly every part of life, and that means metrology does as well. However, as a field, metrology is not a pillar. It’s made up of both larger subfields and more niche branches, and to better understand the work metrologists do every day, it’s important to know the differences between these types of metrology.Introduction to MetrologyAccording to The International Bureau...

A digital multimeter (DMM) is the first tool most of us reach for when troubleshooting an electrical issue. It provides a variety of measurement features that can help isolate a problem or narrow down the list of potential issues. Troubleshoot Transient Voltages in VFDs Using a Digital MultimeterWhen troubleshooting a variable frequency drive (VFD), a multimeter is an excellent tool to start with. Variable frequency drives are motor controllers that vary the frequency and voltage of power supplied...

Find out how air leak detection equipment prevents downtime for a 150,000 square foot plant that runs approximately 400 tools on compressed air, produced by a 200-horsepower compressor.

Even the smallest air leaks can compound product and energy waste and lost production time—especially for a production line that cannot function without compressed air to run its tools and processes.

What if there were a leak detection technology that could pinpoint the precise location of a leak from up to 50 meters away? The Fluke ii900 Sonic Industrial Imager, a “gamechanger” in the pursuit of finding compressed air leaks.

According to the U.S. Occupational Safety and Health Administration’s (OSHA) Recommended Practices for Health and Safety Programs, a 50-person plant typically can increase productivity by 13% and save more than $265,000 in faulty products by implementing a rigorous safety and health program.

Learn how for some use cases, a telephoto, macro or wide angle lens can prove invaluable. Plus, find out why ‘smart lenses' are better than the alternative.

Thermal imaging inspection reports communicate findings and produce action, such as a repair order or further monitoring of equipment. This article includes information on what to include in a report—a summary, thermal and digital (visible light) images,

How to measure current with a digital multimeter plus clamp accessory.

Improving energy efficiency and building performance through retro-commissioning entails commissioning older buildings that need fine tuning or were not properly commissioned initially.

Keeping all the components of a facility running safely and efficiently is no easy task. And nobody knows that better than maintenance managers. Tracking the operational health of all those components is key to preventing unexpected failures and costly downtime. The trouble is, routine maintenance checks often miss recurring problems. If maintenance technicians aren’t taking readings at the right moment, an intermittent fault can go undetected until it escalates into a full-fledged failure.The...

When you perform an energy or power quality survey you need to measure days or weeks of data, imagine the disappointment if when you return to the logger after that time you discover that you have failed to capture the correct measurements. The support teams at Fluke all too often get calls from users who don’t understand the measurements they have logged, usually they think the instrument is at fault. Usually though the problem is due to the user making a connection error, this can be due to incorrect...

Testing medical gases and piping systems in healthcare facilities and hospitals presents multiple challenges for maintenance teams. Learn why efficient leak detection is critical.

Compressed air lines are at the epicenter of success or failure for many factories. When compressed air lines are maximally intact, the equipment they run also function as expected. But when compressed air lines are compromised, the results can be detrimental.In a large factory, a compressor system can stretch hundreds of feet and sweep in and out through various other operational systems. Issues in a compressed air system can occur anywhere along those lines—including the compressor, air dryer,...

When the Society for Canadian Women in Science and Technology (SCWIST) was founded in 1981, it had a simple vision: empower, include, inspire, connect, and sustain Canadian women in science, technology, engineering, and math (STEM) fields. Today, SCWIST remains a leader in STEM programs, partnerships, scholarships, and networks for women of all ages in Canada. An advocate for women and girls pursuing STEM careers, they believe it is crucial to their mission to narrow the gender gap by encouraging...

The University of Washington (UW) is one of the top-ranked universities for electrical engineering nationwide. The University of Washington’s Electrical & Computer Engineering department (ECE) values innovation and high-impact research. They’re also committed to broadening the STEM population to include more women, underrepresented minorities, and foreign nationals. The UW ECE exceeded the national average of women in the field for undergraduate and graduate degrees in recent years.   Nhu Trong...

An I-V curve is a graphical representation of measured current (I) and power as a function of voltage (V). I-V curve tracing is integral to your evaluation of PV module performance and diagnosis of degradation in power output.

Acoustic imaging technology has emerged as a transformative tool in various industries, offering a novel approach to sound analysis. It provides precise visual representations of sound sources, contributing significantly to industrial maintenance, enhancing reliability, and ensuring safety. In this article, we will explore the fundamentals of acoustic imaging, its industrial applications, and the benefits it offers.Understanding Acoustic Imaging TechnologyAcoustic imaging technology excels at converting...

Learn how acoustic imaging cameras detect leaks, leak source factors and properties, leak type classification and leak rate quantification.

Compressed gases come with inherent risks no matter the industry, but for hospitals, the risks are even greater due to the nature of the business. Besides healing patients, healthcare facilities are constantly trying to mitigate risk. Learn how hospitals keep patients and employees safe around compressed gas systems.Same gases, different usesGases distributed for human use (patient care) are regulated by the U.S. Food and Drug Administration (FDA) as pharmaceuticals, which means they require a prescription...

Compressed air is the food and beverage industry’s “fourth utility” after the big three of water, electricity, and natural gas. The reliability of this fourth utility depends on predictable air pressure, which means even small leaks can come at a high price.Here’s a look at air leaks commonly found in the food and beverage industry, along with best practices and technologies to address them.The Fluke ii900 Industrial Acoustic Imager includes technology that adds a visual component to traditional...

Countless facilities support clusters of electronic devices, especially computers and other networked machines. Installing proper grounding and the performance of regular grounding tests can result in consistent power quality.Grounding is a low-resistance conductive connection between electrical circuits, equipment and the earth. It impacts the stability of reference voltage in a power system. Proper wiring and grounding are required in any electrical system for safe equipment operation. It is essential...

Fluke Connect software on the 377 FC and 378 FC clamp meters allows you to record, analyze, and share results with others. Trend data for preventive maintenance.

Maximize your pneumatic tools performance with the Fluke ii900 Acoustic Imaging Camera. Diagnose pressure drop and air flow issues in compressed air lines quickly and easily.

For more information: Barbara Ellis (425) 446-4949 barbara.ellis@fluke.com The next generation of wireless vibration monitoring is here! Fluke Reliability introduces the Fluke 3563 Analysis Vibration Sensor: reveal machine fault causes quickly to prevent equipment downtime Everett, Wash., June 24, 2021 – Fluke Reliability, an operating company of Fluke Corporation, is proud to announce its newest product, the Fluke 3563 Analysis Vibration Sensor system. Vibration monitoring helps maintenance...

The new meter’s thin jaw, CAT III 1500 V safety rating, and IP54 rating for dust and water make it ideal for installation and troubleshooting in solar environments.

Marathon Petroleum Company in the U.S. has received an award for their use of acoustic imaging in the turnaround process. The innovation award recognizes Marathon for “improving process safety by deploying a device that detects leaks, which often can’t be seen or heard, through the sound frequencies they emit.” The press release from Marathon continues, “The Fluke Acoustic Imager pinpoints leaks up to 400 feet away and displays them on its LCD screen, using color variations to form a visual...

Learn why improper focus can misreport temperature by 20 degrees or more and how to improve your thermal camera accuracy by following a few tips.

Baseline and trend your machine health monitoring in one place to analyze and troubleshoot issues quickly and efficiently.

See why Fluke makes the best liquid bath calibrators & sells the most. Excelling in range of baths, controllers, automation, technology, mixing, & maintenance.

Get tips for automating your lab with calibration automation software. Get more done more accurately with less experienced staff who learn as they go.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

In the past, motor repair meant dealing with traditional three-phase motor failures that were largely the result of water, dust, grease, failed bearings, misaligned motor shafts, or just plain old age. But motor repair has changed in a big way with the introduction of electronically controlled motors, more commonly referred to as adjustable speed drives (ASDs).

Last Updated: Sept 27, 2013 PLEASE READ THESE TERMS OF USE CAREFULLY. BY ACCESSING OR USING OUR websites, mobile applications or other products or services, YOU AGREE TO BE BOUND BY THESE TERMS OF USE AND ALL TERMS INCORPORATED BY REFERENCE. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT USE OUR WEBSITES, MOBILE APPLICATIONS OR OTHER PRODUCTS OR SERVICES. These Terms of Use ("Terms") apply to your access to, and use of, the websites, mobile applications and other products or services (collectively,...

The current trend in factory automation is to replace traditional control schemes in which each device has its own control wiring with bus systems that link a number of devices via the same cable. One benefit of bus networks is that they require far fewer cables and wires to connect devices to controllers. One of the most popular and widely used of these bus systems is Foundation Fieldbus.

The electrical power issues that most frequently affect industrial plants include voltage sags and swells, harmonics, transients, and voltage and current unbalance. The proper tools to correct these issues include knowledge and electrical test instruments ideally suited for each task.

Moving or reconfiguring a production line can disrupt a complex and finely tuned system. When you move a line, electrical distribution systems, variable frequency drives (VFDs), programmable logic controllers (PLCs), lighting, communication circuitry, controls, emergency stop systems, and more are susceptible to unanticipated changes ranging from glitches to outright failures.

Voltage stability may be a problem in areas where loads are cycling on and off during the day. Large compressors, motors, welding machines, arc furnaces, power factor correction capacitors and other large electrical machinery along with system impedance can easily cause voltage dips, swells, and transients.

Monitoring three-phase power quality is a must. Whether you troubleshoot mysterious electrical problems or provide additional services to a client, it is three-phase power that is provided to commercial and industrial customers and three-phase power that is distributed throughout a facility.

The digital multimeter is the mainstay of electrical troubleshooting and the tool that most of us reach for first. In Beyond the Multimeter, we look at five examples of how reaching for an oscilloscope next can make troubleshooting faster, easier, and more effective.

Fluke News Plus Predictive Maintenance Archive Articles

Inductive heating, which typically occurs when phase conductors are routed around metal mounting channels, supports, or braces, can cause catastrophic and deadly failures in electrical distribution and control equipment.

Late on a Sunday afternoon the Kern County Fire Department responded to a call at a store on Rosedale Highway in Bakersfield, California. Crews found that a row of solar panels on the roof had caught fire. Some of the panels were still live when the crew arrived, so the fire crew had to take extra precautions until electrical power could be disconnected.

Avoiding arc flash hazard at an asphalt plant where safety is a top expectation, with the use of Fluke wireless tools.

Predictive maintenance (PdM) programs monitor equipment condition, with the goal of identifying problems in advance and avoiding equipment failure. One powerful tool for monitoring rotating equipment is thermal imaging.

Capacitance is the ability of a component or circuit to collect and store energy in the form of an electrical charge.

CNX 3000 wireless test tool field trial by electrical contractor AECI in industrial facilities: trouble call applications

Sometimes the infrared images you need to capture are the ones that are almost impossible to take. With a full 180-degree articulating lens and 5.7 inch touchscreen, the new Fluke® TiX560 and TiX520 Infrared Cameras allow thermographers to easily navigate over, under, and around objects to preview and capture images with ease. The cameras are ideal for predictive maintenance, R&D, oil and gas, and utility applications where flexibility and higher resolution are essential.

Read an introductory overview in this app note of the Fluke 8588A & 8558A bench multimeters for calibration adjustment & performance verification processes.

Fluke's latest 8588A and 8558A high performance DMMs include several new and innovative improvements to help you do your job right. See for yourself here.

If you knew how much it cost to run that equipment

For the most part industrial and commercial electrical systems are getting safer and more reliable. The U.S. Fire Administration's most recent report, analyzing data from 2001, estimates that 8.7% of the nation's 47,785 non-residential fires were caused by electrical distribution equipment. That's 32% fewer than in 1998.

Measuring live voltages and current in today's high energy environments can result in a severe hazard to equipment and users if proper precautions are not applied. Given the risk of transients, surges, and old-fashioned human error, it always pays to follow safe work practices and use test instruments rated for the voltage or current you're measuring.

Since a small increase in current flow to a motor produces a proportionately larger amount of heat, motor amperage exceeding nameplate values should be carefully investigated as a possible cause. These overload trips, though often caused by motor loading issues, can also indicate bearing failure, insulation breakdown or voltage unbalance.

Boilers and their associated systems are an important part of a modern commercial building's central energy plant. Prevent costly downtime and expensive equipment failures.

Four must-have measurement practices for the mechanical maintenance team: thermal, vibration, insulation, electrical

In Part I of this short application note series, we discussed inspection points on motors to make during an energy audit or other efficiency program. Part I covers basic motor efficiency strategy and describes tests and cost savings for voltage and current unbalance and for power factor. Part II covers inspection points that are best incorporated into regular, long-term preventive maintenance.

Troubleshooting motor and drive problems such as single-phasing (losing one of the phase voltages) and flashover currents to outer bearings.

 If you're still using these solenoid testers, it's time to trade up to an solid-state electrical tester.

With energy savings, there's intent and then there's plan. Industrial facilities in the United States show a sustained interest in energy management. That's the intent: Reduce overall energy usage or sustain usage but increase the amount produced per kW used.In manufacturing, a plan will only stick if it has both the wisdom of experience guiding the vision and the ROI numbers to back up the effort. But in energy, there just isn't the body of research out there for an industrial plant manager to use to set baselines for what "reasonable" energy usage looks like in a manufacturing facility.

The application note explains what kind of logging these meters can perform, how to use the recording feature, and the information that can be provided to you. This note also discusses how FlukeView Forms PC software is used to increase the power of the Recording feature.

A Florida county water utilities department uses Fluke tools to measure VFD output filtering, Min/Max frequency, phase-to-phase voltage imbalances and motor insultation resistance checks.

A Canadian engineer keeps wind farm in New Brunswick up and running by using a Fluke multimeter.

A dry-block calibrator is a tool for calibrating temperature measurement devices. Unlike other calibration methods, dry-block calibrators use a dry-well to provide a stable and uniform temperature source, making them ideal for accurate temperature calibration.These devices are critical in ensuring that temperature sensors and thermometers provide correct readings, vital in various industries where precise temperature control is required. In this article, we’ll discuss how dry-block calibrators...

Fluke Corp. introduces the new Fluke® TiX620 Infrared Camera, joining the TiX640, TiX660 and TiX1000 models as part of the Fluke Expert Series. The TiX620 is an ideal infrared camera for the experienced thermographer. Its 640 x 480 resolution provides high measurement accuracy and 5.6 inch high-resolution LCD screen affords a premium in-field viewing experience making identification of problem spots quicker and easier. The large screen enables thermographers to identify issues and edit images directly on camera while still in the field — reducing time in the office that was previously spent optimizing images and generating reports.

In the last decade or so the trend in factory automation has been to replace the traditional control scheme, where each device has its own control wiring, with bus systems that link multiple devices through the same cable. One of the most popular and widely used bus systems is Foundation Fieldbus, which includes two different protocols–H1 and HSE (High-speed Ethernet) protocol. Each of those protocols meets different needs within the factory automation environment and uses different physical media...

Few things are as disposable as paper towels. But the next time you nonchalantly toss away (or compost) a paper towel, keep in mind that there's a lot more to it than meets the eye.

EVERETT, Wash., May 17, 2018 – Fluke Calibration has released the results of their second annual Calibration and Metrology Compensation Survey. Data collected in this survey shows median annual base salary information across multiple industries and disciplines in the field of metrology in the United States, and how those incomes differ between educational backgrounds, ranging from high school diploma to doctorate degree and including years of service and job roles, such as metrologist, calibration...

This case history comes from an electrical contractor. Several of this contractor's clients operate large commercial buildings.

Because power quality issues are difficult to pinpoint, clients often reach the wrong conclusions about their power issues. That often leads to expensive solutions that don't actually correct the underlying problem.

New true-rms T6 Electrical Testers — the first tools with FieldSense technology — are now available EVERETT, Wash., Dec 4, 2017 – Troubleshooting electrical systems has traditionally required gaining access to metallic contact points so the test leads can make contact. And while pen-style non-contact voltage testers have been available for some time, these tools only detect voltage. They do not give the user a measured value.Fluke has now developed FieldSense technology that takes the open-fork,...

Vibration screening helps maintenance and reliability teams avoid rotating machine failure.

This application note explains how to use the MDA-550 Motor Drive Analyzer and a shaft voltage probe to measure motor shaft voltage discharge events.

Proportional smart control valves play critical roles in process industries. Accurately assessing valve performance, however, can be a cumbersome routine.

In infrared imaging, precise focus means a lot more than just getting a clear image. It can mean the difference between catching or overlooking a problem.

As California approaches a state-wide mandate to add solar to all new residential construction, the skilled labor gap and solar installation expertise will be top of mind.

The Industrial Internet of Things (IIOT)-the concept of interconnected applications, equipment, and technology- is more than just an abstraction.

Learn how infrared cameras measure heat signatures and use color palettes, spatial resolution, and proper focus to create a thermal image.

Pressure is all around us, affecting us in a multitude of ways every day. From the moment you wake up, you’re interacting with different kinds of pressure in manners you might not even think about. Any time you grab or push something, you’re exerting pressure on it. Even just sitting in a chair is creating pressure. It’s a crucial building block of physics.In this article, we’ll cover what exactly pressure is and the different types of pressure that you can measure.What Is Pressure?Pressure...