Fluke Networks MT-8200-61-TNR IntelliTone™ Pro 200 Tone Generator
Model#: MT-8200-61-TNRPart#: 4586079UPC#: 7 54082 12745 1
Fluke Networks MT-8200-61-TNR IntelliTone™ Pro 200 Tone Generator is rated out of 5 by 2.
Key features
- Verifies and troubleshoots copper cabling, service and continuity
- Kit includes IntelliTone™ Pro 200 Toner, adapters, patch cables, test leads
- SmartTone analog signals for locating cabling on active networks
- Four distinct cadences for isolating individual wire pairs
- Supports VDV cable types inc. RJ45/11, coax, bare wire
In stock
$237.11
Product overview: Fluke Networks MT-8200-61-TNR IntelliTone™ Pro 200 Tone Generator
Digital and analog tone generator verifies and troubleshoots copper cabling in networks—identifying the type of service and verifying continuity. F-type connector supports VDV cables: RJ45, RJ11, coaxial, bare wire, banana jacks/test leads. Diagnoses 10/100 Gigabit Ethernet link connectivity with NIC/hub indication.
Specifications: Fluke Networks MT-8200-61-TNR IntelliTone™ Pro 200 Tone Generator
| General specifications | |
| Operating temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Storage temperature | -4 °F to +140°F (-20 °C to °C) |
| Operating relative humidity (% RH without condensation) | 95 % (50 °F to 95 °F; 10 °C to 35 °C) 75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C) |
| Vibration | Random, 2 g, 5 Hz-500 Hz |
| Shock | 1 m drop test |
| Safety | EN 61010-1, Category: None |
| Altitude | 3000 m |
| EMC | EN 61326-1, FCC Part 15 B |
| Battery type and life | 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
| Applications | Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cable Map function of the IntelliTone 200. |
| Toner specifications | |
| Dimensions | 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
| Display | LED |
| Control | Thumbwheel switch |
| Toner interface | Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) - two conductor wiring |
| Toner frequency | "IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500 - 1200Hz, 4 songs" |
| Ouptut power | 5 V p-p |
| Auto power down | Turns off automatically after 2 1/2 hours of inactivity |
Models: Fluke Networks MT-8200-61-TNR IntelliTone™ Pro 200 Tone Generator
MT-8200-61-TNR
Fluke Networks MT-8200-61-TNR IntelliTone™ Pro 200 Tone Generator
UPC#: 7 54082 12745 1
Includes:
- IntelliTone™ Pro 200 LAN Toner
- Coax F connector adapter
- RJ11 and RJ45 patch cables
- Test leads with alligator clips
- Lanyard
- Quick start guide
- 9-volt battery
Rated 4 out of 5 by kimya from good job i bought this and very happy with it , but i wonder if i can use it with cables connected to poe 90w switch or not ?
Date published: 2022-10-29
Rated 5 out of 5 by James91 from Great tool Have used the fluke intellitone for years for troubleshooting and verifying cables. Such a reliable tool its every techs must have piece of equipment.
Date published: 2021-05-25