Cęgi prądowe i2000FLEXPQ4 (4 sztuki)
Wycofane
Ten produkt został wycofany z produkcji lub przeklasyfikowany
Omówienie produktu: Cęgi prądowe i2000FLEXPQ4 (4 sztuki)
Very large, flexible AC current clamps
A pack of 4 pieces of the i2000 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434.
- This 4-pack is perfect for use with 3-phase tools such as the Fluke 433 or Fluke 434
- Each clamp has two ranges: 200 A & 2000 A, 1 or 10 mV/ Amp output
- Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
- Maximum conductor Ø160 mm
- CAT III 600 V safety rating
Specyfikacje: Cęgi prądowe i2000FLEXPQ4 (4 sztuki)
Specifications | |
Nominal current range | 200 A 2000 A |
Continuous current range | 2 A - 200 A 20 A - 2000 A |
Maximum non-destructive current | 4000 A |
Lowest measurable current | 2 A |
Basic accuracy | 1% F.S. (48-65 Hz) (% reading + floorspec) |
Useable frequency | 1 Hz - 20 kHz |
Output level(s) | 10 mV/A 1 mV/A |
Safety Specifications | |
Safety | CAT III, 600 V |
Maximum voltage | 600 V AC |
Mechanical and General Specifications | |
Warranty | 1 year |
Battery life | 9 V, >100 h. |
Maximum conductor diameter | 160 mm |
Output cable length | 2.3 m |
BNC adapter | Yes |
BNC to banana adapter included | Yes |
Modele: Cęgi prądowe i2000FLEXPQ4 (4 sztuki)
i2000FLEXPQ4
Fluke i2000PQ4 Current Clamp, 4-pack