Fluke 753 Process Calibrator Firmware Upgrade
Follow the steps below to upgrade your Fluke 753 Process Calibrator to the latest firmware.
Step 1: Download the Firmware
- Download firmware version 1.06 or 1.16 depending on which firmware your calibrator is currently using, and save the firmware upgrade file.
- For calibrators currently running firmware versions 1.00, 1.01, 1.02, 1.03, 1.04 or 1.05 download firmware V1.06 (.exe).
- 2. For calibrators currently running firmware versions 1.10, 1.11, 1.13, 1.14 or 1.15 download firmware V1.16 (.exe).
Step 2: Prepare the Update
- Ensure that your calibrator is connected to a Windows PC via USB cable.
- Plug in the battery charger to ensure continuous power.
Step 3: Install the Firmware
- Run the downloaded firmware exe file.
- Follow the on-screen instructions.
- Do not disconnect the calibrator or turn off the PC during the update.
- When the update completes, power the calibrator off and back on.
Note - It is NOT necessary to recalibrate your unit after the firmware update has been completed.
Fluke 753 Firmware Release Information (pdf)
Fluke 753/754 Windows Driver
Download 753/754 Windows Driver »
This is the driver that will enable Windows programs to communicate with the 753 and 754 through the USB port. Download this self-extracting installer and run it. Once installed, the 753/754 will be assigned to a Windows COM port. If necessary for the software package you are using, launch the windows device manager and you see what COM port has been assigned.
Important Notes
- If you have already installed DPCTrack2, then it will install this driver and, it should not be necessary to do it again.
- For other software that communicates with the 753, you will need to install this driver.
- Some software will automatically find the appropriate COM port and some will require that you manually configure it by inputting the COM port that the 753 is communicating on (this is shown in the Windows Device Manager). See the particular software for more information.
Optional information is available for download regarding licensing for the open−source software that is included.
- Open-source software licensing information V1.06 (.iso) for firmware version 1.06.
- Open-source software licensing information V1.16 (.iso) for firmware version 1.16.
If you experience any problems during the update, launch the update application and try again. If problems still occur, contact the Fluke Technical Support team or call 1-800-44-FLUKE (1-800-443-5853) for further assistance.