All digital multimeter articles
The latest technology available combines a digital multimeter with a thermal imager and adds wireless capabilities so measurements can be taken from a safe distance, saved and even stored in secure data centers for later analysis.
Compare IP rating, battery life and other features. What is the difference between the Fluke 87V MAX and the 87V digital multimeter?
Fluke multimeters tested by Adam Savage. Trusted tool recommendation for budget multimeter review.
A digital multimeter is essentially a voltage-measuring tool with some current abilities. A clamp meter is basically a current-measuring tool with some voltage abilities. They are distinctly different instruments, each with its own advantages.
Learn how to test continuity using a digital multimeter.
Steps for measuring ac voltage with a digital multimeter.
Steps for using a multimeter in the Diode Test mode.
How to measure current with a digital multimeter plus clamp accessory.
If you’re an electrician or technician who is responsible for keeping industrial systems and processes up and running safely, efficiently, and cost effectively you know that the quicker you can find a problem, the quicker you can fix it.
Common Terminology and Abbreviations for DMM Products
Few things are as disposable as paper towels. But the next time you nonchalantly toss away (or compost) a paper towel, keep in mind that there's a lot more to it than meets the eye.
The 189 was the first Fluke handheld DMM that offered two ways to measure AC volts. In the Vac function, the measurement was essentially the same as most Fluke DMMs, but the 189 also allows you to measure ac volts while in the Vdc function.
The most popular reason for paralleling conductors is to provide higher ampacity than a single conductor can provide. "In a typical building design, the largest conductors are usually 500 kcmil or 600 kcmil". "And many electrical contractors will actually object to 600 kcmil. If ampacity above 400 A is necessary, using parallel conductors is the only reasonable solution.
HSI Security Systems installs, maintains and monitors electronic life-safety systems throughout Northwest Oregon and Southwest Washington. We're an electrical contractor that specializes in low voltage systems and rudimentary electrical controls.
Checking your test leads to make sure they are in good condition and rated for the job at hand is the best insurance for accuracy and safety
Read harrowing true stories about extreme testing experiences with Fluke tools.
Understand how to use under-utilized functions on your DMM such as Fast/Peak and Min/Max.
A Canadian engineer keeps wind farm in New Brunswick up and running by using a Fluke multimeter.
Making sure that equipment delivers peak performance at all times requires ongoing troubleshooting on the part of maintenance technicians. Depending on the size and scope of the facility, operations will change over and produce many different products and packages in varying size runs.
Founded in 1997, LIFETECH S.R.O. develops, designs and distributes equipment for water and air treatment and purification. The company also services its equipment, as well as equipment made by other manufacturers. Lifetech has about twenty employees overall, with five in the Development Department.
In the world of handheld digital multimeters, maintenance professionals are being deluged with new models, new manufacturers, new functionality, claims about ruggedness, claims about water- and dust-resistance - the list goes on and on.
Troubleshooting robotic equipment with the Fluke 175 True RMS Digital Multimeter at Briggs & Stratton plant; manufactures small engines for generators, pumps, pressure washers
A Florida county water utilities department uses Fluke tools to measure VFD output filtering, Min/Max frequency, phase-to-phase voltage imbalances and motor insultation resistance checks.
Find out what the hidden dangers of making voltage and current measurements with a tester that does not have the fuse protection that was designed into the tester - dangers than can cause serious burns, and possibly even death.
Find out what dual impedance and voltage detection are and why it's good to have them built into your multimeter. Find out about impedance basics, ghost voltages, non-contact voltage detection and the absence or presence of voltage testing.
The application note explains what kind of logging these meters can perform, how to use the recording feature, and the information that can be provided to you. This note also discusses how FlukeView Forms PC software is used to increase the power of the Recording feature.
Read success stories from ONSITE PC Assitance owner Robert Johns. Working on mostly low voltage equipment for home offices and small-to-medium business, Johns uses the Fluke 116 to measure for low voltage, auto-ranging and min/max temperature.
Expert Chuck Newcombe compares digital multimeters of yesterday with today's DMMs with true-rms ac measurement capability. Get the facts about the subtle points you should know when making rms measurements.
Astronomers from the University of New South Wales (UNSW) in Australia have been working in Antarctica's interior since 1996. In collaboration with astronomers from France, Italy and the United States, they're seeking the perfect location for the next generation of deep-space telescopes.