Fluke 87V Industrial Multimeter
Model#: Fluke 87V
Fluke 87V Industrial Multimeter is rated out of 5 by 163.
Key features
- Identify complex signal problems fast
- Supports accurate measurements on VFDs using a low-pass filter
- Captures intermittents as fast as 250 µS with Peak Capture
Product overview: Fluke 87V Industrial Multimeter
The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.
- Easy-access door for fast battery changes without breaking the calibration seal
- Analog bar graph for fast changing or unstable signals
- Large digit display with bright, two-level backlight for easier reading in low light
- Touch Hold keeps readings on display even after removing probes
The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.
Built to highest safety standards
All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.
Removable holster with built in test lead and probe storage for convenience
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.
Additional measurement features
The Fluke 87V is designed and built in the U.S. and comes with a lifetime warranty.
For a complete comparison of specifications, please visit our selection guide for digital multimeters.
 |  |  |  |  | |
|---|---|---|---|---|---|
| Fluke 87V Industrial Multimeter | Fluke 87V MAX True-rms Digital Multimeter | Fluke 289 True-RMS Data Logging Multimeter | Fluke 179 True-RMS Digital Multimeter | Fluke 1587 FC Insulation Multimeter | |
| CAT rating | CAT III 1000 V CAT IV 600 V | CAT III 1000 V CAT IV 600 V | CAT III 1000 V CAT IV 600 V | CAT III 1000 V CAT IV 600 V | CAT III 1000 V CAT IV 600 V |
| True-rms readings | ✔ | ✔ | ✔ | ✔ | ✔ |
| Voltage AC/DC | 1000 V | 1000 V | 1000 V | 1000 V | 1000 V |
| Current AC/DC | 10 A | 10 A | 10 A | 10 A | 400 mA |
| Resistance | 50 MΩ | 50 MΩ | 500 MΩ | 50 MΩ | 50 MΩ |
| Capacitance | 9,999 μF | 9,999 μF | 100,000 μF | 9,999 μF | 9,999 μF |
| Temperature | -200 °C to 1090 °C | -200 °C to 1090 °C | -200 °C to 1350 °C | -40 °C to 400 °C | -40 °C to 537 °C |
| Additional measurement capabilities | Frequency, continuity/diode test, motor drive (VFD) measurement, duty cycle, microamps, analog bar graph, relative reference | Conductance, continuity/diode test, duty cycle, frequency, microamps, motor drive (VFD) measurement, pulse width, elative reference | Conductance (50ns), duty cycle, frequency, continuity/diode test, low input impedance, microamps, pulse width | Continuity/diode test, frequency, microamps | Frequency, Pi/DAR timed ratio tests, continuity/diode test, motor drive (VFD) measurement, microamps, relative reference |
| IP rating | IP 30 | IP 67 | IP 42 | - | - |
| Battery life | 400 hours | 800 hours | 200 hours | 200 hours | 1000 hours |
| Drop test | 3 meters | 4 meters | - | - | - |
| Backlit keypad | No | Yes | No | No | No |
What's in the box:
- Fluke 87V Industrial Multimeter
- TL75 Test Leads (TL175 Eur)
- AC175 Alligator Clips
- Holster with tilt-leg, test lead storage
- 80BK Temperature Probe
- 9V Battery (Installed)
Specifications: Fluke 87V Industrial Multimeter
| Specifications | ||
| Voltage DC | Maximum voltage | 1000 V |
| Accuracy | ±(0.05% + 1) | |
| Maximum resolution | 10 µV | |
| Voltage AC | Maximum voltage | 1000 V |
| Accuracy | ±(0.7% + 2) True RMS | |
| AC bandwidth | 20 kHz with low pass filter; 3 dB @ 1 kHz | |
| Maximum resolution | 0.1 mV | |
| Current DC | Maximum amps | 10 A (20 A for 30 seconds maximum) |
| Amps accuracy | ±(0.2% + 2) | |
| Maximum resolution | 0.01 µA | |
| Current AC | Maximum amps | 10 A (20 A for 30 seconds maximum) |
| Amps accuracy | ±(1.0% + 2) True RMS | |
| Maximum resolution | 0.1 µA | |
| Resistance | Maximum resistance | 50 MΩ |
| Accuracy | ±(0.2% + 1) | |
| Maximum resolution | 0.1 Ω | |
| Capacitance | Maximum capacitance | 9,999 µF |
| accuracy | ±(1% + 2) | |
| Maximum resolution | 0.01 nF | |
| Frequency | Maximum frequency | 200 kHz |
| Accuracy | ±(0.005% + 1) | |
| Maximum resolution | 0.01 Hz | |
| Duty cycle | Maximum duty cycle | 99.9% |
| Accuracy | ±(0.2% per kHz + 0.1%) | |
| Maximum resolution | 0.1% | |
| Temperature measurement | -200.0 °C to 1090 °C -328.0 °F to 1994.0 °F excluding probe | |
| 80 BK temperature probe | -40.0 °C to 260 °C -40.0 °F to 500 °F, 2.2 °C or 2% whichever is greater | |
| Conductance | Maximum conductance | 60.00 nS |
| Accuracy | ±(1.0% + 10) | |
| Maximum resolution | 0.01 nS | |
| Diode | Range | 3 V |
| Resolution | 1 mV | |
| Accuracy | ±(2% + 1) | |
| Duty cycle range | Accuracy | Within ±(0.2% per kHz + 0.1%) |
| Environmental Specifications | ||
| Operating temperature | –20 °C to + 55 °C | |
| Storage temperature | –40 °C to + 60 °C | |
| Humidity (without condensation) | 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C) | |
| Operating Altitude | 2000 m | |
| Safety Specifications | ||
| Overvoltage category | EN 61010–1 to 1000 V CAT III, 600V CAT IV | |
| Agency approvals | CE, CSA, RCM | |
| Mechanical and General Specifications | ||
| Size | 201 x 98 x 52 mm (with holster) | |
| Weight | 355 g 624 g – with holster | |
| Display | Digital | 6000 counts updates 4/sec. 19,999 counts in high–resolution mode |
| Analog | 32 segments, updates 40/sec | |
| Frequency | 19,999 counts, updates 3/sec at > 10 Hz | |
| Warranty | Lifetime | |
| Battery Life | Alkaline | ~400 hours typical, without backlight |
| Shock | 1 Meter drop per IEC 61010–1:2001 | |
| Vibration | Per MIL–PRF–28800 for a Class 2 instrument | |
Models: Fluke 87V Industrial Multimeter
Fluke 87V
Fluke 87V Industrial Multimeter
Includes:
- TL75 Test Leads (TL175 EUR)
- AC175 Alligator Clips
- Holster
- 9V Battery (Installed)
- 80BK Temperature Probe
Fluke 87V Industrial Multimeter is rated out of 5 by 163.
Rated 5 out of 5 by Dan360 from Standard others judged by More multi meter than I'll ever need. Buy quality and only cry once!
Date published: 2017-07-05
Rated 5 out of 5 by CN20106 from Very Good Meter I've had this meter a couple of months now and like this meter. I knew being a Fluke it would of good quality. The reason I got this particular model was it covers all of the standard features in one meter. The main one that I needed was to be able to measure 4-20ma signals. As for me Fluke is the only meter to have. I've still got my first Fluke meter and it still works. It's a Fluke 77 from 1993.
Date published: 2016-12-19
Rated 5 out of 5 by IVoidWarranties from Well Worth The Price I've been using Fluke test equipment on and (much to my chagrin) off again for nearly 40 years. They have always been durable, reliable, accurate, and easy to use, and the 87V is no exception. I purchased the 87V to replace an aging 77 that "grew legs" and wandered off earlier this year. (Thinking back, I don't think I've ever had to replace a Fluke meter because it failed on me.)
At first, I thought I could manage with a multimeter from another manufacturer. It worked, I suppose, but I missed my old 77 and decided to buy a new 87. I'm glad I did! And I'm looking forward to getting another one in about 30 years or so. :)
Date published: 2016-12-14
Rated 5 out of 5 by MotorJoe from Accurate and Rugged I am an Auto Technician that specializes in automotive electrical systems and computers. I have been doing this for 18 years. I use my Fluke 87V every day. I know that every morning that I go to turn it on, that it will work properly. It is extremely accurate and fast. Due to the speed of the meter, I can check computer networks buy using the min/max feature. Also the min/max feature allows me to check a vehicle for a parasitic draw. It has survived through very harsh environments. I would never think about buying any other brand meter. For me it is always only Fluke!!!
Date published: 2016-12-14
Rated 5 out of 5 by BobPo from My Favorite Meter I purchased the 87V meter about 9 months ago and it works great, It has become my favorite meter I like it's accuracy and easy to use controls.
I've used Fluke products for a while now, and feel very comfortable with any Fluke product. I use it both professionally and also at home for electric, electronics and automotive. I like using the thermometer function so I don't have to remember to carry another device. It is extremely durable.
Date published: 2016-12-12
Rated 5 out of 5 by PLCManager from Workhorse The benchmark of the industry. There is very little that I have found can't be done with this meter, aside from power sourcing. Its user friendly and hold up to the environment. The magnetic tether strap is god sent at times.
Date published: 2016-12-12
Rated 5 out of 5 by WW0215 from Reliability, Durability and Longevity I have to agree that the 87 is "built like a brick" I bought mine in 1998 and have only had to have it serviced one time due to my on negligence. Still spot on accurate today after all these years. I use the infrared attachment as well as the amp clamp. I also have several other Fluke meters and all demonstrate the same high degree of accuracy and reliability.
Date published: 2016-12-12
Rated 5 out of 5 by Bill D from Great Multimeter for VFD output measurements For voltage and frequency measurements, this meter is fairly accurate. The filter reading option gives the voltage as non-RMS which acts like an analog meter to compliment the complex waveform RMS voltage reading. Frequency measurements where spot on when confirmed with Fluke Scope Meter.
Date published: 2016-12-12
Rated 5 out of 5 by CRE EE from Fluke 87-V A Great Instrument As an electronics engineer, I know the importance of good, reliable, and accurate test tools. That is why when it came to my home and personal use, I chose the Fluke 87-V . At an affordable price, it offers the precision and reliability I came to expect from the Fluke instruments that I use at work.
Date published: 2016-12-11
Rated 5 out of 5 by EE4fun from Great DVMs Fluke makes reliable, durable, and dependable DVMs. I still use my Fluke 23 DVM after more than 25 years but purchased the 87V to get:
- Back light, for easier to see measurements in a poor lighting conditions.
- Larger display digits
- Relative measurements: to compare measurements (parts) or cancel out test lead contributions.
- Built-in capacitance and temperature reading ability.
- Higher diode test voltage
- Configurable 3 1/2 or 4 1/2 digit display
- Low current measurements (uA)
- Low voltage measurement (mV)
- Frequency and duty cycle measurements
- Min max average measurements
- Selectable continuity tone
- Built in fuse test
- Lead configuration error tone
- Optional magnetic DVM holding strap, to free up your hands or work space.
- Optional silicon lead and probe kit.
The DVM still provides autohold and a related min/max/ave function that helps you monitor a measurement by providing feedback when a new value is detected. Two different response times may used. This feature can also be combined with the high-resistance measurement ability to get a stable reading. A few other features provide bar graph adjustments and input low-pass filtering.
Date published: 2016-12-11
Rated 5 out of 5 by Kartman26 from Gold Standard for DMM's I own the 115 and this 87-V and they are both high quality, well-built meters. The 115 is good but the build quality of this meter is unsurpassed IMO. The display contrast of the LCD panel is much better on this meter, which makes it noticeably easier to read. The back lighting is more even as well in the 87-V, and has two brightness levels. Continuity readings for up to the most ohms of any multimeter I've seen. So many nice features like nano-siemens, 1,000 VDC & VAC, max/min for sine wave diagnosis, includes settings for micro volts for electronics, and many neat push button while turning on features you can find on youtube and in internet articles. For the price you know you are getting the best multimeter in the advanced category that hopefully lasts a lifetime.
Date published: 2016-12-10
Rated 5 out of 5 by HHuang from The best multimeter out there I bought this few years ago just to use for my hobby modifying cars. It had been a wonderful multimeter for me. I used to have an older version of Fluke back in Asia that I had for 20 years, and looks like this 87V is even more robust! It's so user friendly, all the button and knob are logically mark, the display is easy to read, all you ever one in a digital multimeter. The price is high but you got what you pay.
Date published: 2016-12-10
Rated 5 out of 5 by spell from A lot to like I bought my Fluke 87V as a backup for those situations where I needed to use two meters at the same time. It has quickly become my primary troubleshooting tool.
I like it's accuracy, solid feel and intuitive controls.
The only place for improvement is on the leads. They're perfectly functional, but compared with the "same" leads that shipped 3 years ago with my Fluke 289. They're clearly inferior. The silicone insulation is more rigid and there is excessive flashing at the over-molds at the meter end.
Date published: 2016-12-09
Rated 5 out of 5 by Jeff47 from I can always trust Fluke. I bought this a couple of years ago and I am glad I did. The quality and durability make it a pleasure to work with. The big thing I like about Fluke is that when I take a reading I don't have to wonder if it is right or not. Their meters have always been trustworthy. And if you drop it , it won't die. Great value!
Date published: 2016-12-09
Rated 5 out of 5 by Yafa from User friendly and built to last! I work in the mechanical trades. I'm also getting into working on automobiles and household electronics. The 87-5 is more multi meter than I'll ever need. But after a recommendation from one of my instructors and countless reviews online I know I've made the right choice. Accuracy is on point and fit and finish are amazing! Looking forward to getting more acquainted with my new Fluke.
Date published: 2016-12-09
Rated 5 out of 5 by Lee128 from Great Meter I purchased this multimeter for our new lab. We use a metal pegboard to store our tools and the magnetic mount strap came in handy for hanging up the meter in its case. I'm very pleased with the performance and quality of the meter. I like the flexibility of being able to change the probe tips between alligator and standard probes.
Date published: 2016-12-08
Rated 5 out of 5 by juansnapon from #1 Meeter I purchased the Fluke 87V about a year ago and it has never let me down. I work with a lot of technicians and my Fluke out preforms so of the other name brand units that are just to slow for I like to see. Others have Snap on and Mac branded units that they paid more for and still have issues with Hertz and the rate of change is way to slow when checking just basic voltage. I also own an 87 version one, that still works, it was clicking for a little, that's the reason why I got the new version 5, but it eventually started working again. I guess it just needed a rest. My 88 as well that the screen started to fade, repiared with just a cleaning of the contacts. I have not found a better meter.
Date published: 2016-12-08
Rated 5 out of 5 by Wibb from Old Faithful I work in the electric utility sector and we issue these meters to our relay test crews. Every tester/technician carries two Fluke DMM's (87 and 289) and every person prefers their Fluke 87. These meters are simple to use, reliable, and respond quickly (we flash DC circuits to prove electrical paths). I ordered several new meters this year as replacements for our vintage 87's and will be ordering more as we replace older meters. It would be difficult to find a better alternative for this meter.
Date published: 2016-12-08
Rated 5 out of 5 by JVaros from The goto handheld for troubleshooting wiring Initially started using these in the military while working Avionics on Fixed and Rotary wing aircraft. Fell in love with them back then and have continued to use to this day. Currently these are used by our service personnel and engineers in the lab. This is a good meter to own and put in the tool box. I continue to use mine at home along with a newer one at work. I am happy with both.
Date published: 2016-12-08
Rated 5 out of 5 by DanKrushinski from FLUKE Meters are the best. I have been in the industry for thirty years and I have always used FLUKE peoducts and I just purchased a FLUKE 87V. It has all the features a DVM should have and the quality is the best. I am very satisfied with my purchase. There is a reason everyone I know considers FLUKE meters to be the best.
Date published: 2016-12-08
Rated 5 out of 5 by deej from Still the One The Fluke 87V meter is solid all around. I've been 30 yrs. in Production Maintenance and International Service. Fluke meters have always been in my tool box, tool kit and tool bag. Reliable and accurate readings made troubleshooting down equipment quicker and easier to get to the root cause of failure.
Date published: 2016-12-08
Rated 5 out of 5 by JasonR from Great value I have been using a Fluke 87 III for almost 5 years. The person that had it before me retired just before I started. I have only had to change the battery once or twice. This meter is built tough, I have dropped it a few times and it keeps working great. I use the meter on 480VAC and under and 24VDC. If they can handle my abuse, I think they could handle almost anything.
Date published: 2016-12-08
Rated 5 out of 5 by Bill W from Great extra functions I wanted a meter that hertz measurement which this satisfied but it also stands up to a lot of industrial wear and tear. The lighted screen is great when inside control panels. Always feel confident and safe when verifying AC or DC voltages/amperage in various applications. I have used this meter inside, outside, rain, and snow. Great meter!
Date published: 2016-12-08
Rated 5 out of 5 by Wild Bill from Great Industrial Multimeter I love the accurses of this meter and the rugged construction of this meter, it is one of the bets meters on the market with all the features most maintenance employee need. to tackle your troubleshooting jobs.
Date published: 2016-12-08
Rated 5 out of 5 by Ruben19 from Amazing DMM I bought the 87V for school and work use. Its the best meter, the Fluke 87V does everything, it's very accurate and precise. I've had it for a while and it hasn't failed me at all. Very good meter I would highly recommend it to anyone who is looking for a dependable accurate meter.
Date published: 2016-12-08
Rated 5 out of 5 by bimrone from Fluke 87-V & Fluke 78 I had a Fluke 78 for years and now have stepped up to the 87-V. Fluke makes rugged instruments that are easy to use. Fluke provides good service too should any repairs be necessary. The Fluke 78 still works great after years of use and I gave it to my son. I will never buy another brand.
Date published: 2016-12-07
Rated 5 out of 5 by Guahan88 from The Only Brand of meters I trust I started my career in electro mechanical maintenance using a Beckman DMM, but after witnessing a coworker almost lose his life due to having his meter in ohms while measuring a high voltage source and the protection circuit failed, I switched to Fluke.
I have used and trusted with my life Fluke meters in my job since 1988, everything from the Fluke 12 , 70, 87II, 287, and I recently purchased my 87V, since my lose of my 87II due to theft. I would recommend Fluke meters to other people with out hesitation.
Date published: 2016-12-07
Rated 5 out of 5 by Bryan N from Reliable and rugged I have been using the Fluke 87 for several years and have never had any issue. This is a very reliable meter with a lot of functions that meet all my needs. I have also purchased the lead accessories which work very well and make the meter easy to measure circuits in many application.
Date published: 2016-12-07
Rated 5 out of 5 by Plyr3668 from Fluke - Fluke 87V Industrial Multimeter Not only is this a great product for work, it is an excellent tool and has all the necessary features to learn and obtain degree in electronics. Wouldn't go to work or school without it. I've also bought the accessories for this product and they compliment it well.
Date published: 2016-12-07
Rated 5 out of 5 by Makebacon from Old Faithful I have been using Fluke meters from the beginning of my career. Started with my first 87 II in A school for the US Navy. I have used other meters, but never liked any of them more than a Fluke. I now have the 87V and love how versatile it is. I use it at work as an industrial Maintenance Technician, and at home for everything else from automotive to HVAC, and basic electrical circuits.
Date published: 2016-12-07
Rated 5 out of 5 by Dan360 from Standard others judged by More multi meter than I'll ever need. Buy quality and only cry once!
Date published: 2017-07-05
Rated 5 out of 5 by CN20106 from Very Good Meter I've had this meter a couple of months now and like this meter. I knew being a Fluke it would of good quality. The reason I got this particular model was it covers all of the standard features in one meter. The main one that I needed was to be able to measure 4-20ma signals. As for me Fluke is the only meter to have. I've still got my first Fluke meter and it still works. It's a Fluke 77 from 1993.
Date published: 2016-12-19
Rated 5 out of 5 by IVoidWarranties from Well Worth The Price I've been using Fluke test equipment on and (much to my chagrin) off again for nearly 40 years. They have always been durable, reliable, accurate, and easy to use, and the 87V is no exception. I purchased the 87V to replace an aging 77 that "grew legs" and wandered off earlier this year. (Thinking back, I don't think I've ever had to replace a Fluke meter because it failed on me.)
At first, I thought I could manage with a multimeter from another manufacturer. It worked, I suppose, but I missed my old 77 and decided to buy a new 87. I'm glad I did! And I'm looking forward to getting another one in about 30 years or so. :)
Date published: 2016-12-14
Rated 5 out of 5 by MotorJoe from Accurate and Rugged I am an Auto Technician that specializes in automotive electrical systems and computers. I have been doing this for 18 years. I use my Fluke 87V every day. I know that every morning that I go to turn it on, that it will work properly. It is extremely accurate and fast. Due to the speed of the meter, I can check computer networks buy using the min/max feature. Also the min/max feature allows me to check a vehicle for a parasitic draw. It has survived through very harsh environments. I would never think about buying any other brand meter. For me it is always only Fluke!!!
Date published: 2016-12-14
Rated 5 out of 5 by BobPo from My Favorite Meter I purchased the 87V meter about 9 months ago and it works great, It has become my favorite meter I like it's accuracy and easy to use controls.
I've used Fluke products for a while now, and feel very comfortable with any Fluke product. I use it both professionally and also at home for electric, electronics and automotive. I like using the thermometer function so I don't have to remember to carry another device. It is extremely durable.
Date published: 2016-12-12
Rated 5 out of 5 by PLCManager from Workhorse The benchmark of the industry. There is very little that I have found can't be done with this meter, aside from power sourcing. Its user friendly and hold up to the environment. The magnetic tether strap is god sent at times.
Date published: 2016-12-12
Rated 5 out of 5 by WW0215 from Reliability, Durability and Longevity I have to agree that the 87 is "built like a brick" I bought mine in 1998 and have only had to have it serviced one time due to my on negligence. Still spot on accurate today after all these years. I use the infrared attachment as well as the amp clamp. I also have several other Fluke meters and all demonstrate the same high degree of accuracy and reliability.
Date published: 2016-12-12
Rated 5 out of 5 by Bill D from Great Multimeter for VFD output measurements For voltage and frequency measurements, this meter is fairly accurate. The filter reading option gives the voltage as non-RMS which acts like an analog meter to compliment the complex waveform RMS voltage reading. Frequency measurements where spot on when confirmed with Fluke Scope Meter.
Date published: 2016-12-12
Rated 5 out of 5 by CRE EE from Fluke 87-V A Great Instrument As an electronics engineer, I know the importance of good, reliable, and accurate test tools. That is why when it came to my home and personal use, I chose the Fluke 87-V . At an affordable price, it offers the precision and reliability I came to expect from the Fluke instruments that I use at work.
Date published: 2016-12-11
Rated 5 out of 5 by EE4fun from Great DVMs Fluke makes reliable, durable, and dependable DVMs. I still use my Fluke 23 DVM after more than 25 years but purchased the 87V to get:
- Back light, for easier to see measurements in a poor lighting conditions.
- Larger display digits
- Relative measurements: to compare measurements (parts) or cancel out test lead contributions.
- Built-in capacitance and temperature reading ability.
- Higher diode test voltage
- Configurable 3 1/2 or 4 1/2 digit display
- Low current measurements (uA)
- Low voltage measurement (mV)
- Frequency and duty cycle measurements
- Min max average measurements
- Selectable continuity tone
- Built in fuse test
- Lead configuration error tone
- Optional magnetic DVM holding strap, to free up your hands or work space.
- Optional silicon lead and probe kit.
The DVM still provides autohold and a related min/max/ave function that helps you monitor a measurement by providing feedback when a new value is detected. Two different response times may used. This feature can also be combined with the high-resistance measurement ability to get a stable reading. A few other features provide bar graph adjustments and input low-pass filtering.
Date published: 2016-12-11
Rated 5 out of 5 by Kartman26 from Gold Standard for DMM's I own the 115 and this 87-V and they are both high quality, well-built meters. The 115 is good but the build quality of this meter is unsurpassed IMO. The display contrast of the LCD panel is much better on this meter, which makes it noticeably easier to read. The back lighting is more even as well in the 87-V, and has two brightness levels. Continuity readings for up to the most ohms of any multimeter I've seen. So many nice features like nano-siemens, 1,000 VDC & VAC, max/min for sine wave diagnosis, includes settings for micro volts for electronics, and many neat push button while turning on features you can find on youtube and in internet articles. For the price you know you are getting the best multimeter in the advanced category that hopefully lasts a lifetime.
Date published: 2016-12-10
Rated 5 out of 5 by HHuang from The best multimeter out there I bought this few years ago just to use for my hobby modifying cars. It had been a wonderful multimeter for me. I used to have an older version of Fluke back in Asia that I had for 20 years, and looks like this 87V is even more robust! It's so user friendly, all the button and knob are logically mark, the display is easy to read, all you ever one in a digital multimeter. The price is high but you got what you pay.
Date published: 2016-12-10
Rated 5 out of 5 by spell from A lot to like I bought my Fluke 87V as a backup for those situations where I needed to use two meters at the same time. It has quickly become my primary troubleshooting tool.
I like it's accuracy, solid feel and intuitive controls.
The only place for improvement is on the leads. They're perfectly functional, but compared with the "same" leads that shipped 3 years ago with my Fluke 289. They're clearly inferior. The silicone insulation is more rigid and there is excessive flashing at the over-molds at the meter end.
Date published: 2016-12-09
Rated 5 out of 5 by Jeff47 from I can always trust Fluke. I bought this a couple of years ago and I am glad I did. The quality and durability make it a pleasure to work with. The big thing I like about Fluke is that when I take a reading I don't have to wonder if it is right or not. Their meters have always been trustworthy. And if you drop it , it won't die. Great value!
Date published: 2016-12-09
Rated 5 out of 5 by Yafa from User friendly and built to last! I work in the mechanical trades. I'm also getting into working on automobiles and household electronics. The 87-5 is more multi meter than I'll ever need. But after a recommendation from one of my instructors and countless reviews online I know I've made the right choice. Accuracy is on point and fit and finish are amazing! Looking forward to getting more acquainted with my new Fluke.
Date published: 2016-12-09
Rated 5 out of 5 by Lee128 from Great Meter I purchased this multimeter for our new lab. We use a metal pegboard to store our tools and the magnetic mount strap came in handy for hanging up the meter in its case. I'm very pleased with the performance and quality of the meter. I like the flexibility of being able to change the probe tips between alligator and standard probes.
Date published: 2016-12-08
Rated 5 out of 5 by juansnapon from #1 Meeter I purchased the Fluke 87V about a year ago and it has never let me down. I work with a lot of technicians and my Fluke out preforms so of the other name brand units that are just to slow for I like to see. Others have Snap on and Mac branded units that they paid more for and still have issues with Hertz and the rate of change is way to slow when checking just basic voltage. I also own an 87 version one, that still works, it was clicking for a little, that's the reason why I got the new version 5, but it eventually started working again. I guess it just needed a rest. My 88 as well that the screen started to fade, repiared with just a cleaning of the contacts. I have not found a better meter.
Date published: 2016-12-08
Rated 5 out of 5 by Wibb from Old Faithful I work in the electric utility sector and we issue these meters to our relay test crews. Every tester/technician carries two Fluke DMM's (87 and 289) and every person prefers their Fluke 87. These meters are simple to use, reliable, and respond quickly (we flash DC circuits to prove electrical paths). I ordered several new meters this year as replacements for our vintage 87's and will be ordering more as we replace older meters. It would be difficult to find a better alternative for this meter.
Date published: 2016-12-08
Rated 5 out of 5 by JVaros from The goto handheld for troubleshooting wiring Initially started using these in the military while working Avionics on Fixed and Rotary wing aircraft. Fell in love with them back then and have continued to use to this day. Currently these are used by our service personnel and engineers in the lab. This is a good meter to own and put in the tool box. I continue to use mine at home along with a newer one at work. I am happy with both.
Date published: 2016-12-08
Rated 5 out of 5 by DanKrushinski from FLUKE Meters are the best. I have been in the industry for thirty years and I have always used FLUKE peoducts and I just purchased a FLUKE 87V. It has all the features a DVM should have and the quality is the best. I am very satisfied with my purchase. There is a reason everyone I know considers FLUKE meters to be the best.
Date published: 2016-12-08
Rated 5 out of 5 by deej from Still the One The Fluke 87V meter is solid all around. I've been 30 yrs. in Production Maintenance and International Service. Fluke meters have always been in my tool box, tool kit and tool bag. Reliable and accurate readings made troubleshooting down equipment quicker and easier to get to the root cause of failure.
Date published: 2016-12-08
Rated 5 out of 5 by JasonR from Great value I have been using a Fluke 87 III for almost 5 years. The person that had it before me retired just before I started. I have only had to change the battery once or twice. This meter is built tough, I have dropped it a few times and it keeps working great. I use the meter on 480VAC and under and 24VDC. If they can handle my abuse, I think they could handle almost anything.
Date published: 2016-12-08
Rated 5 out of 5 by Bill W from Great extra functions I wanted a meter that hertz measurement which this satisfied but it also stands up to a lot of industrial wear and tear. The lighted screen is great when inside control panels. Always feel confident and safe when verifying AC or DC voltages/amperage in various applications. I have used this meter inside, outside, rain, and snow. Great meter!
Date published: 2016-12-08
Rated 5 out of 5 by Wild Bill from Great Industrial Multimeter I love the accurses of this meter and the rugged construction of this meter, it is one of the bets meters on the market with all the features most maintenance employee need. to tackle your troubleshooting jobs.
Date published: 2016-12-08
Rated 5 out of 5 by Ruben19 from Amazing DMM I bought the 87V for school and work use. Its the best meter, the Fluke 87V does everything, it's very accurate and precise. I've had it for a while and it hasn't failed me at all. Very good meter I would highly recommend it to anyone who is looking for a dependable accurate meter.
Date published: 2016-12-08
Rated 5 out of 5 by bimrone from Fluke 87-V & Fluke 78 I had a Fluke 78 for years and now have stepped up to the 87-V. Fluke makes rugged instruments that are easy to use. Fluke provides good service too should any repairs be necessary. The Fluke 78 still works great after years of use and I gave it to my son. I will never buy another brand.
Date published: 2016-12-07
Rated 5 out of 5 by Guahan88 from The Only Brand of meters I trust I started my career in electro mechanical maintenance using a Beckman DMM, but after witnessing a coworker almost lose his life due to having his meter in ohms while measuring a high voltage source and the protection circuit failed, I switched to Fluke.
I have used and trusted with my life Fluke meters in my job since 1988, everything from the Fluke 12 , 70, 87II, 287, and I recently purchased my 87V, since my lose of my 87II due to theft. I would recommend Fluke meters to other people with out hesitation.
Date published: 2016-12-07
Rated 5 out of 5 by Bryan N from Reliable and rugged I have been using the Fluke 87 for several years and have never had any issue. This is a very reliable meter with a lot of functions that meet all my needs. I have also purchased the lead accessories which work very well and make the meter easy to measure circuits in many application.
Date published: 2016-12-07
Rated 5 out of 5 by Plyr3668 from Fluke - Fluke 87V Industrial Multimeter Not only is this a great product for work, it is an excellent tool and has all the necessary features to learn and obtain degree in electronics. Wouldn't go to work or school without it. I've also bought the accessories for this product and they compliment it well.
Date published: 2016-12-07
Rated 5 out of 5 by Makebacon from Old Faithful I have been using Fluke meters from the beginning of my career. Started with my first 87 II in A school for the US Navy. I have used other meters, but never liked any of them more than a Fluke. I now have the 87V and love how versatile it is. I use it at work as an industrial Maintenance Technician, and at home for everything else from automotive to HVAC, and basic electrical circuits.
Date published: 2016-12-07