English

Fluke 28 II Rugged Digital Multimeter

Fluke 28 II Rugged Digital Multimeter is rated 4.7 out of 5 by 10.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.03ms
  • REVIEWS, PRODUCT
  • Fluke 28 II Rugged Digital Multimeter
  • Fluke 28 II Rugged Digital Multimeter with leads, clips, temperature probe
  • Fluke 28 II Rugged Digital Multimeter is waterproof and dustproof

Key features

  • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • MSHA approval
  • Limited lifetime warranty

Product overview: Fluke 28 II Rugged Digital Multimeter

The standard for rugged

The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The meter offers an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 28 II Rigged Digital Multimeter is built to work in the toughest environments.

Other key capabilities

  • Measure up to 1000 V AC and DC
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended AC voltage bandwidth– 15 Hz to 20 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • Peak min-max
  • Hi resolution 20,000 count display mode
  • True-rms ac voltage and current for accurate measurements on non linear signals
  • Backlit keypad buttons allow for easy visibility in low-lit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
  • Long battery life (800 hours)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks

Specifications: Fluke 28 II Rugged Digital Multimeter

Accuracy Specifications
DC voltageRange0.1 mV to 1000 V
Accuracy0.05% + 1
AC voltageRange0.1 mV to 1000 V
Accuracy0.7% + 4
DC currentRange0.1 μA to 10 A
Accuracy0.2% + 4
AC currentRange0.1 μA to 10 A
Accuracy1.0% + 2
ResistanceRange0.1 Ω to 50 MΩ
Display counts6000
Capacitance1 nF to 9999 μF
Frequency0.5 Hz to 199.99 kHz
Temperature-200°C to +1090°C
Low pass filter (Measurement on VSD’s)Yes
ComplianceCAT IV 600 V , CAT III 1000 V
IP ratingIP 67
PowerThree AA batteries
Battery life800 hours
General Specifications
DisplayBar graph/backlightYes/Yes
Data storagePeak transient capture250 μS
Min/Max/AvgYes
Reading holdYes
Other featuresRelative readings (zero)Yes
Battery typeThree AA batteries
Warranty and protectionSafety ratingCAT IV 600 V/CAT III 1000 V
Mine safetyMSHA Approved
External protectionRubber holster
Drop test10 feet drop test
Dustproof/waterproofYes, IP 67 rated
WarrantyLimited lifetime
Size (H x W x L) with holster6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in)
Weight with holster698.5 g (1.54 lb)

Models: Fluke 28 II Rugged Digital Multimeter

Fluke 28 II
Fluke 28 II Rugged Digital Multimeter
Buy it
  • TL75 test leads
  • AC175 alligator clips
  • 80BK-A type-K thermocouple leads

Reviews: Fluke 28 II Rugged Digital Multimeter

Rated 2 out of 5 by from Great meter, useless battery design I purchased this unit approximately one year ago it has performed flawlessly and reliably. Working in remote areas I thought it prudent to read the manual for battery replacement. Manual states that you require AA batteries and Phillips head screwdriver, imagine my surprise when the batteries fail and I go to replace them and find that the screws in the manual referred to as Phillips head are a specialised type screw which no sane person would carry in their toolbox. Being 150km from the nearest town with a hardware store that was the end off the days work being unable to test the solar setup. Getting home I find in my toolkit a torque head that fits this unusual screw, opening the compartment I find a battery holder that Quasimodo on a sad day would have designed. Seriously if that’s the best you could come up with you need to fire the person responsible and hire someone from kindergarten.
Date published: 2020-06-11
Rated 5 out of 5 by from DURABLE!!! This meter lasted a ship reck and 4 days in brackish water and still works!!! Love this thing and I couldn't talk more highly about it.
Date published: 2019-02-06
Rated 5 out of 5 by from Rugged As All Get Out!! As much as my tools get abused this meter was a must have, and it's proven its worth every time my clumsy self drops it or gets it wet.
Date published: 2017-01-19
Rated 5 out of 5 by from Safe Meter I bought this meter about a year ago and liked its safety features Readings were quick and stable. A big plus is It uses three AA alkaline batteries that can last up to 600 hours. The unit is packed with a pair of PVC test leads that does not plug into the meter easily, it requires a lot of force to get them seated properly. This premium Fluke multi meter should have been packaged with a set of premium Fluke silicone test leads.
Date published: 2016-12-12
Rated 5 out of 5 by from Easy to use I have had this meter for years and love it its rugged and dependable and I use it more than my newer fluke
Date published: 2016-12-08
Rated 5 out of 5 by from Rugged Meter I bought this meter a few months ago the primary reason why I purchased this model is because of its rugged skin its able to survive use in high humid/hot/rain and constant temperature differences in the Gulf Coast. Very dependable high resolution helps the instrument be more accurate.Also the capability to be used as a bench meter.
Date published: 2016-12-08
Rated 5 out of 5 by from My new favorite I've used the 80 series for decades but when looking for a new meter for work I came across this one. Just about all of the same functions and features as the 80's but in a rugged case. Brilliant.
Date published: 2016-12-07
Rated 5 out of 5 by from Bulletproof...well, close. I purchased this meter back in March while I was working in an automotive R&D test facility. I have had several DMMs, but usually a splash of diesel or a hard drop would kill them. I finally splurged and went with a meter that I knew I'd be happy with, and I'm glad I did. I can rinse this off if it gets something nasty on it, and now at my new position in an aerospace R&D group, it's still trusted enough to be allowed through calibration and is my go-to for quick measurements.
Date published: 2016-12-07
  • y_2020, m_11, d_20, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_fluke-28-ii, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.71ms
  • REVIEWS, PRODUCT