Fluke 87V Industrial Multimeter
Fluke 87V Industrial Multimeter is rated out of 5 by 103.
Key features
- Identify complex signal problems fast
- Supports accurate measurements on VFDs using a low-pass filter
- Captures intermittents as fast as 250 µS with Peak Capture
Product overview: Fluke 87V Industrial Multimeter
The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations.
Identify complex electrical problems fast
- Supports accurate measurements on VFDs using a low-pass filter
- Captures intermittents as fast as 250 µS with Peak Capture
- Blocks high-frequency, high-energy noise generated by large drive systems with specially designed shielding
Removable holster with built in test lead and probe storage for convenience
- Holds probe during testing for easier viewing
Offers relative mode to remove test lead interference from low ohms measurements
- Improves accuracy of low-resistance measurements
Safety features
- All the inputs in the 87V are updated to the third edition of the EN 61010-1 to 1000 V CAT III and 600 V CAT IV
- Designed to withstand spikes of more than 8000 V
- Audible Input Alert warning against wrong use of input jacks
Additional tool features
- Designed and built in the U.S.
- Comes with a lifetime warranty
- Easy access door for fast battery changes without breaking the calibration seal
- 6,000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
- Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Includes an analog bar graph for fast changing or unstable signals
- Presents a large digit display with bright, two-level backlight for easier reading in low light
- Delivers 0.05% DC accuracy
- Provides 10,000 µF capacitance range for components and motor caps
- Auto and manual ranging for maximum flexibility
- Holds readings on display for safe viewing after removing probes using Touch Hold technology
Specifications: Fluke 87V Industrial Multimeter
Specifications | ||
Voltage DC | Maximum voltage | 1000 V |
Accuracy | ±(0.05% + 1) | |
Maximum resolution | 10 µV | |
Voltage AC | Maximum voltage | 1000 V |
Accuracy | ±(0.7% + 2) True RMS | |
AC bandwidth | 20 kHz with low pass filter; 3 dB @ 1 kHz | |
Maximum resolution | 0.1 mV | |
Current DC | Maximum amps | 10 A (20 A for 30 seconds maximum) |
Amps accuracy | ±(0.2% + 2) | |
Maximum resolution | 0.01 µA | |
Current AC | Maximum amps | 10 A (20 A for 30 seconds maximum) |
Amps accuracy | ±(1.0% + 2) True RMS | |
Maximum resolution | 0.1 µA | |
Resistance | Maximum resistance | 50 MΩ |
Accuracy | ±(0.2% + 1) | |
Maximum resolution | 0.1 Ω | |
Capacitance | Maximum capacitance | 9,999 µF |
accuracy | ±(1% + 2) | |
Maximum resolution | 0.01 nF | |
Frequency | Maximum frequency | 200 kHz |
Accuracy | ±(0.005% + 1) | |
Maximum resolution | 0.01 Hz | |
Duty cycle | Maximum duty cycle | 99.9% |
Accuracy | ±(0.2% per kHz + 0.1%) | |
Maximum resolution | 0.1% | |
Temperature measurement | –200.0 °C – 1090 °C –328.0 °F – 1994.0 °F excluding probe | |
80 BK temperature probe | –40.0 °C – 260 °C –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater | |
Conductance | Maximum conductance | 60.00 nS |
Accuracy | ±(1.0% + 10) | |
Maximum resolution | 0.01 nS | |
Diode | Range | 3 V |
Resolution | 1 mV | |
Accuracy | ±(2% + 1) | |
Duty cycle range | Accuracy | Within ±(0.2% per kHz + 0.1%) |
Environmental Specifications | ||
Operating temperature | –20 °C to + 55 °C | |
Storage temperature | –40 °C to + 60 °C | |
Humidity (without condensation) | 0% – 90% (0 °C – 35 °C) 0% – 70% (35 °C – 55 °C) | |
Operating Altitude | 2000 m | |
Safety Specifications | ||
Overvoltage category | EN 61010–1 to 1000 V CAT III, 600V CAT IV | |
Agency approvals | CE, CSA, RCM | |
Mechanical and General Specifications | ||
Size | 201 x 98 x 52 mm (with holster) | |
Weight | 355 g 624 g – with holster | |
Display | Digital | 6000 counts updates 4/sec. 19,999 counts in high–resolution mode |
Analog | 32 segments, updates 40/sec | |
Frequency | 19,999 counts, updates 3/sec at > 10 Hz | |
Warranty | Lifetime | |
Battery Life | Alkaline | ~400 hours typical, without backlight |
Shock | 1 Meter drop per IEC 61010–1:2001 | |
Vibration | Per MIL–PRF–28800 for a Class 2 instrument |
Models: Fluke 87V Industrial Multimeter
Fluke 87V
Fluke 87V Industrial Multimeter
Includes:
- TL75 Test Leads
- AC175 Alligator Clips
- Holster
- 9V Battery (Installed)
- 80BK Temperature Probe
Reviews: Fluke 87V Industrial Multimeter
Rated 2 out of 5 by johnrh from Good meter, bad support Its a good meter, when the display went bad i contacted fluke to have it repaired, I was bluntly told that my version was too old and they didn't support it any longer but they offered to sell me a new one. The older meters are the ones that need support, not the newer ones. At their price point they should do better.
Date published: 2018-10-01
Rated 5 out of 5 by toolnut from Made well and has a great track record Excellent meter that is replacing a couple different meters that I was using to handle different tasks. Very durable and reliable. Looking for a good deal on one for a while and found it. Made in the USA is a plus.
Date published: 2018-07-31
Rated 4 out of 5 by deej from Good DMM, lots of useful features Good meter for all around Maintenance duties, Reliable.
Date published: 2018-07-10
Rated 3 out of 5 by Mr Bob from In My Opinion: Superb Meter Has Disappointments.. Meter itself seems to be fine; all ranges & calibrations seem nominal. Packaging indicates unit was manufactured within a month of arrival. Packaging also indicates meter was made in the US… but surprisingly, no ‘made in’ markings were found on the actual instrument.
It irks me to have confidence in ordering a ‘Lexus’ grade instrument, only to be disappointed by:
1.) Low end stiff springy leads! Where’s the forever ‘fabled in story and song’ Fluke silicone leads? Yes the ones included are (TL75) Fluke branded, but look/feel ‘econobudget’. See photo below.
2.) No included printed manual! Whats with that?!? (If desired one can be ordered free of charge; and/or viewed/downloaded online.)
3.) No Underwriters Laboratories (UL) Certification! Unless I missed it, but close examination of the instrument & packaging revealed nothing. Meter does exhibit other certifications….
The above three surprises earned a two star rating reduction. It’s sad one can’t order and expect the best without having to scrutinize ad copy.
Date published: 2018-07-03
Rated 5 out of 5 by Gnbilly from Ease of use and features. I bought this to replace a 179 that was stolen. I like the added features.
Date published: 2018-06-30
Rated 5 out of 5 by 1Soxfan from Fluke 87 V, calibrated out of the box? I've been using these for a lot of years and they work very well. I purchased a new one this week and there's no certificate of Calibration? I assume Fluke wouldn't sell me an out of tolerance produce. And given their product line, knows the importance of a calibration certificate. So is the unit calibrated or not?
Date published: 2018-05-25
Rated 5 out of 5 by Joe A from I replaced a 1989 model #87 I have always had good performance from Fluke equipment.
Date published: 2018-05-22
Rated 5 out of 5 by DMxxxxxx from Nice features for the price $450. Full features for what you get.
Grainger is the best rep to get test eq from quickly.
Date published: 2018-05-18
Resources: Fluke 87V Industrial Multimeter
- 80 Series V | Users manual
- 80 Series V | Users manual supplement
- 80 Series V | Calibration manual
- 80 Series V | Calibration manual supplement
- 80 Series V | Getting started
- 80 Series V | Getting started supplement
- 80 Series V | Safety sheet
- 80 Series V, 83 V, 85 V, 87 V | Quick reference guide
- 83, 87, 88 Series V | Statement of memory volatility
- 88 V | Quick reference guide