Fluke 1773, 1775 and 1777 Power Quality Analyzers Software and Firmware
Fluke Energy Analyze Plus
Fluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and 1777.
Fluke 177x v3.2.1 Firmware File (.bin)
To update instruments running firmware revision 2.0 or earlier, create a directory titled ‘Fluke177x’ on a USB stick and copy the firmware binary to that directory location.
Please note that Firmware v3.2.1 includes cybersecurity enhancements that support compliance with the European Radio Equipment Directive (RED) 2014/53/EU + 2022/30, and is compatible with Fluke Energy Analyze Plus v3.13 or higher.
To update instruments, create a directory titled ‘Fluke177x’ on a USB stick and copy the firmware binary to that directory location.
The USB stick must be exFAT or FAT32 formatted, and the above-mentioned directory must be located at root level. Refer to firmware release notes for more details. Note: Formatting the USB stick will erase all existing data on the USB stick.
Plug the USB stick into the instrument and follow the instructions on the display. You can also use ‘17xx Setup’ function of Energy Analyze Plus to start the update process without a USB stick. For detailed information, refer to the instrument manual.
Fluke 177x v3.2.1 Firmware Release Information (.pdf)
Fluke 177x Energy Loss Calculator Guide (.pdf)
In every electrical system some energy is lost. This energy is not delivered to the loads in your system and is therefore wasted.
The Energy Loss Calculator (ELC) mode is helps identify where these energy losses exist in your electrical system. ELC mode is available on 1775/7. Requires Firmware v3.1 or above.
Fluke 177x Calibration Tool v1.33 (.zip)
This application supports calibration of the Fluke 177x product family. See the Fluke 177x calibration manual for requirements.