検索結果

検索条件:
Found 131 results containing the words:product
  • Comparing the Fluke 438-II and Fluke MDA-500

    Extend motor drive production performance, trend data over time and troubleshoot excess energy consumption. Compare the 438-II Power Quality and Motor Analyzer and the Fluke MDA-550 Motor Drive Analyzer.

    記事
  • 単相と三相の電源、単相電源と三相電源の違いとは?

    用途や構成など、単相電源と三相電源の違いについて学びます。

    記事
  • Want to be more proactive? Add route-based vibration to your technician’s toolkit

    .super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; } .super-custom body { margin: 0; } .super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup, .super-custom main, .super-custom menu, .super-custom nav, .super-custom section, .super-custom summary { display: block; } .super-custom audio, .super-custom canvas, .super-custom...

    記事
  • Fluke 910 and 910R GPS Week Number Rollover Event

    MEMORANDUM FOR U.S. OWNERS AND OPERATORS USING GPS TO OBTAIN UTC TIME (211.91 KB)A recent notice from Homeland Security announces a GPS Week Number Rollover Event scheduled for April 6th, 2019. This event will affect the 910 and 910R products that were purchased before 2007.Dept. of Homeland Security Notice     What will happen?On this date, at the rollover time, some units will lose date information and display a 1999 date for reporting purposes. Frequency deviation data may not be archived within...

    記事
  • Pressure Calibration and Repair Services

    Fluke Calibration offers pressure calibration and repair services in the United States through our accredited calibration laboratories in Phoenix, Arizona and Everett, Washington. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about...

    記事
  • 非接触電圧テスターとは?

    非接触電圧テスターとは? 障害が発生したアセットのトラブルシューティングを行う場合、最初に利用できるツールは、電圧テスターとも呼ばれる非接触型の検電器です。これらのポケットサイズの検電器は、電圧の存在を即座に識別します。

    記事
  • 5 ways test tools can improve safety around rotating machinery

    The electrical hazards associated with electro-mechanical equipment are severe and the electrical safety PPE requirements are extensive. But what about safety concerns from the mechanical side of rotating machinery?

    記事
  • The 7 Best Tools for Electricians in 2024

    We recently asked electricians what they considered their top 5 essential tools—there were a few ties, so we’re sharing their top 7.

    記事
  • Preventive maintenance vs predictive maintenance vs proactive maintenance

    What is the difference between preventive maintenance vs predictive maintenance programs? Learn how to move from a reactive to a proactive maintenance program.

    記事
  • Insulation tester vs megohmmeter

    What is the difference between an insulation tester and a megohmmeter? Compare insulation meters, testers, megohmmeters, and meggers to learn about what's best for your needs.

    記事
  • Maximizing Your Industrial Ethernet Cabling UpTime

    /* ************************************************************ */ /* After pasting this file into the textbox, put your content inside a block */ /* ************************************************************ */ .super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; font-size: 10px; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); } .super-custom body { margin: 0; font-family: "Helvetica Neue", Helvetica, Arial, sans-serif; font-size: 14px; line-height:...

    記事
  • How to adjust the level and span on your thermal camera

    Watch a video tutorial on adjusting level and span using your Fluke Ti400, Ti300 or Ti200 thermal imager to accurately locate specific trouble spots.

    記事
  • Top 3 solar PV safety hazards and how to avoid them

    Avoid these top 3 solar hazards and learn how to work safer when maintaining PV systems. You need to know the control measures to take and how to plan for a safe work environment.

    記事
  • Ruska pressure calibration

    Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

    記事
  • Hart Scientific Temperature Calibration

    Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

    記事
  • Pressurements deadweight testers and comparison test pumps calibration

    Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

    記事
  • DH Instruments (DHI) Pressure and Flow Calibration

    DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

    記事
  • DH Instruments (DHI), Ruska Instruments, Pressurements and the Fluke Calibration brand

    Ruska Instruments, founded in 1944 in Houston, Texas, grew from a small manufacturer of PVT (pressure, volume, temperature) instrumentation to a leading global manufacturer of precision laboratory pressure instrumentation.  Its deep tradition of pressure metrology makes it a household name in National Metrology Institutes and in other worldwide organizations with demanding pressure calibration needs.  The Ruska brand features primary pressure standards, transfer standards, air data test sets, accessories,...

    記事
  • Temperature Calibration and Repair Services

    IntroductionFluke Calibration provides calibration and repair services for the former Hart Scientific line of temperature calibration equipment. Calibration and repair services for baths and industrial calibrators are provided in Everett, Washington, while digital thermometer readouts, 4180 and 4181 infrared calibrators, temperature probes (SPRTs, PRTs, thermistors, reference thermocouples) and other reference standards are calibrated and serviced in American Fork, Utah.Complete an online request...

    記事
  • Electrical and RF Calibration and Repair Services

    Fluke Calibration offers instrument repair and calibration services for electrical and RF calibration equipment through our accredited calibration laboratories in Everett, Washington (see our Authorized Service Centers page for service outside of the US). Our prices are competitive and our turnaround times are excellent.Equipment types include:Frequency countersMulti-product and multifunction calibratorsVoltage, current and resistance calibratorsProcess calibratorsStandard resistorsZener reference...

    記事
  • Flow Calibration and Repair Services

    Fluke Calibration offers flow calibration and repair services in the US through our accredited calibration laboratory in Phoenix, Arizona. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about these services or to request a quote call...

    記事
  • 9 Things You’ll Love About the Fluke T6-1000 PRO Electrical Tester

    Why choose the Fluke T6 Electrical tester? Read 9 things to love about the first electrical tester that performs AC current, AC voltage and frequency up to 1000 V AC without test leads.

    記事
  • Best tools for energy efficiency management

    Make energy efficiency a part of your preventive maintenance plan to make a positive impact on your bottom line, improve plant performance, and maintain uptime.

    記事
  • Case study: See how the 438-II Motor Analyzer is building an underwater fan club

    Watch the video to see how the Point Defiance Zoo and Aquarium uses the Fluke 438-ii power quality analyzer and motor analyzer to reduce water and energy use.

    記事
  • Fluke Tools + Future of Wind Power and Solar Energy

    Watch this video to how Fluke tools are supporting the future of solar energy, wind power and renewable energy.

    記事
  • True RMS tools for energy efficient HVAC systems

    HVAC technology true-RMS meters are essential test tools for accurately measuring and troubleshooting complex HVAC control systems.

    記事
  • Five tips for taking quality thermal images

    The quality of a thermal image is much more than just aesthetics. It is critical to pinpointing specific areas of concern. A simple way to look at it is: IMAGE QUALITY = focus + optics + spatial resolution (pixels + field of view)

    記事
  • Thermal imaging training enables more accurate analysis

    This comprehensive article gives information on the amount of training a thermographer should have in different industries, and what the better educational courses cover.

    記事
  • How to inspect a motor with a thermal imager

    Seeing a motor’s heat signature under normal operating conditions—with at least 40 % of design load—can tell you a lot about its condition.

    記事
  • How infrared cameras help you stay safe on the job

    If you troubleshoot or maintain equipment in an industrial setting, staying safe depends partly on the environment and partly on you.

    記事
  • Four reasons a compact thermal camera is your secret weapon

    Watch an overview of Fluke’s PTi120 handheld compact thermal camera key features and ideal use

    記事
  • How Good Data Helps Manage PV and Microgrid Performance

    How to use data to prove the value of PV and microgrids in order to provide a safer, cheaper, more secure and more reliable distributed energy electric power system.

    記事
  • The difference between telephoto, macro and wide angle IR lenses

    Learn how for some use cases, a telephoto, macro or wide angle lens can prove invaluable. Plus, find out why ‘smart lenses' are better than the alternative.

    記事
  • Keep those motors running: electric motor maintenance preventing downtime

    Automotive customers have zero tolerance for bad parts and therefore, electric motor maintenance needs utmost care. One of our customers, CNP Myszkow, coats small parts for the automotive industry. After dip spin painting, they heat-treat the parts in a tunnel furnace. This is divided into several areas, each with different temperatures. An electric motor drives a fan in each area to ensure stable temperatures since temperature stability relates strongly to final product quality. Any changes from...

    記事
  • Best accessories to set up a pressure calibration

    Every process technician knows that the most difficult part about doing calibration in the field is getting all the hoses connected properly. Using the thread seal tape to seal up all the connections and having to take the time to reseal every time you perform calibrations. Not only is that time-consuming, but it could also lead to leak issues that throw off your measurements.In this video we're going to look at the best practices for doing a pressure calibration and what accessories, like fittings...

    記事
  • How to find the root cause of intermittent production stops

    How to find the root cause of production line stoppage and reduce downtime in manufacturing.

    記事
  • How to collect data with the Fluke 1748 Power Quality Logger?

    With all Power Meters, Power Quality Analyzers, Energy Loggers or Power Loggers you can measure quite a number of Power parameters. In fact, the number of variables these instruments can measure, log and store is in many cases overwhelming. Imagine yourself setting up, downloading and analyzing a 32GB file with a logging of 500+ parameters over a month period…..So, wishing for “I want to log everything” is in most cases not the best idea, and certainly not the most efficient way. This leaves...

    記事
  • Voltage fluctuations, flicker and power quality

    Flickering lights can have an adverse effect on health, causing fatigue, lack of concentration, migraines and in some cases, epileptic shock. The severity of reaction and sensitivity varies from person to person. Some people can see a higher rate of flickering light than others. Fluorescent lamps can occasionally develop a fault that can cause them to have noticeable flicker.While health effects are a main concern, the production line of an industrial plant can also be affected. Workers can feel...

    記事
  • Get peak variable speed drive efficiency through power quality analyzer

    Variable-speed motors and drives are normally much more efficient than fixed-speed types, but even they don’t always work at peak efficiency. An analysis of VSDs at one drinking water pumping station helped save over 20% of energy costs – repaying many thousands of Euros every year.Load measurement at input and output of a VSD The main energy cost for water companies comes from pumping water up from the well and through the network. Variable-speed drives match output to demand and so help minimize...

    記事
  • Understanding the arc flash boundary

    The arc flash boundary is the minimum “safe” distance from exposed energized conductors or circuit parts that has the potential for an arc flash. The required arc-rated clothing and PPE increases rapidly as a worker approaches the potential source of an arc flash

    記事
  • Arc flash vs arc blast

    Arc flash vs arc blast. When an arc fault occurs, the result is a massive electrical explosion. The light and heat emitted by the explosion is known as the arc flash, and the pressure wave is known as the arc blast.

    記事
  • Guide to Digital Multimeter Safety

    Take digital multimeter safety precautions to handle the conditions found in your work environment. Understand multimeter CAT ratings and ingress protection (IP) codes.

    記事
  • Hand pumps and pressure test gauges for field pressure testing

    It's important to select the proper pump and gauge to match the testing application at hand—a good guideline is the testing device should be 4-10 times more accurate than the device being tested.

    記事
  • From Test Tools to Face Shields: How Fluke is Adapting to Assist in the Fight Against COVID-19

    Learn how Fluke shifted resources to meet the global demand for PPE face shields in the fight against COVID-19.

    記事
  • Tank level measurement and inspections using thermal imaging

    Discover how to use a thermal camera for tank level measurement and inspection. See practical tips for getting the best thermal readings.

    記事
  • Remote power monitoring for maintenance managers

    Keeping all the components of a facility running safely and efficiently is no easy task. And nobody knows that better than maintenance managers. Tracking the operational health of all those components is key to preventing unexpected failures and costly downtime. The trouble is, routine maintenance checks often miss recurring problems. If maintenance technicians aren’t taking readings at the right moment, an intermittent fault can go undetected until it escalates into a full-fledged failure.The...

    記事
  • Documenting approach to pressure switch testing

    Classic methods for pressure switch testing have been superseded with the introduction of new pressure test tools. Today most pressure switches are tested with a pressure gauge mounted to a pump to supply and measure pressure, and a digital multimeter set to continuity to verify the opening and closing of the switch. The technician or electrician making the test is required to interpret the pressure applied to the switch when the continuity beeper sounds indicating contact closure of the switch....

    記事
  • How to use a phasor diagram?

    When you perform an energy or power quality survey you need to measure days or weeks of data, imagine the disappointment if when you return to the logger after that time you discover that you have failed to capture the correct measurements. The support teams at Fluke all too often get calls from users who don’t understand the measurements they have logged, usually they think the instrument is at fault. Usually though the problem is due to the user making a connection error, this can be due to incorrect...

    記事
  • Calibrating at the bench with a pressure comparator

    A pressure comparator is a convenient instrument for bench pressure calibration. Bench calibrations are performed to maintain reference conditions and to obtain the lowest possible uncertainties. The bench is also a convenient place to inspect, adjust, and repair the devices under test.

    記事
  • Calibrating a HART Smart Pressure Transmitter

    Verifying and documenting the performance and adjusting a HART smart pressure transmitter can require a bucket full of tools. Performing this task with a HART enabled calibrator like the Fluke 754 simplifies the task and reduces what you need to carry.

    記事
  • Find problems early by monitoring motor and drive efficiency

    More than 40% of industrial motors work at or below 40% of their load rating. That means poor power factor and inefficient operation. Efficiency of all motors can drop over their lifetime, which increases energy and maintenance costs and can even increase plant downtime. Monitoring drive efficiency catches the symptoms early.The four key power quality measures are:active (real, useful) power in KW,apparent power (complex, that you actually pay for) in kVA,reactive (imaginary, wasted) power in kvar,...

    記事
  • Manual approach to pressure switch testing

    Accurate calibration of pressure switches is a critical step in ensuring process quality and the safe operation of equipment. The setup is like pressure gauge calibration except now a voltage or continuity across a set of switch contacts needs to be read either by a digital multimeter or the calibrator. The purpose of the calibration is to detect and correct errors in the set point and dead band of the pressure switch. Calibrators can save you time by reducing steps and reducing the amount of equipment...

    記事
  • Calibrating at the bench with a deadweight tester

    A deadweight tester is a proven method of pressure calibration that is usually chosen for bench applications when accuracy and reliability are the top requirements. Calibrations are performed at the bench for convenience and to maintain reference conditions.

    記事
  • Hot spot detection—what to look for

    How to find hot spots in electrical systems using a thermal camera. Learn what to look for and understand what causes emissivity anomalies during inspections.

    記事
  • How to calibrate a temperature sensor in the field

    Pairing a Fluke dry well with a handheld documenting calibrator allows for a complete field temperature sensor calibration solution.

    記事
  • How to keep control valve positioners on target

    Learn how to avoid calibration drift on control valve positioners as part of your preventive maintenance program.

    記事
  • PV システムの無負荷ブレーク定格遮断を安全に開放する方法

    電流を遮断しないように設計された、ソーラー PV 無負荷ブレーク遮断の必要条件について説明します。

    記事
  • From the soapy water leak test to ultrasonic leak detection

    Compressed air lines are at the epicenter of success or failure for many factories. When compressed air lines are maximally intact, the equipment they run also function as expected. But when compressed air lines are compromised, the results can be detrimental.In a large factory, a compressor system can stretch hundreds of feet and sweep in and out through various other operational systems. Issues in a compressed air system can occur anywhere along those lines—including the compressor, air dryer,...

    記事
  • FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N Recall Form Submitted

    Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N (Recalled Cable). We have received your information, and your order is in process. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have...

    記事
  • Fluke 17XX Quadcable Recall

    table, th, td { border: 1px solid black; border-collapse: collapse; } table { width: 100%; } th { height: 50px; background-color: #ffc20e; text-align: center !important; } td { height: 50px; text-align: center; } SAFETY WARNING! PLEASE READ! Important Recall Information regarding FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N Dear Fluke Customer, Fluke Corporation has identified a safety issue affecting FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N cables produced from April 2021 up...

    記事
  • 2638A Firmware

    2638A Firmware (.zip)TITLEUSE WITH2638A 1.06.01 Firmware2638ATITLE2638A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Changed default Auto Record from OFF to ON, instrument will by default record data.Default measurement rate...

    記事
  • 6 ways to maximize instrumentation calibration success

    To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

    記事
  • MFC-CB v1.00b Embedded Software

    MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    記事
  • molbox1 v5.41 Embedded Software

    molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    記事
  • molbox RFM™ v1.20d Embedded Software

    molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

    記事
  • National Instruments LabView® driver for Fluke data acquisition instruments

    National Instruments LabView® driver for Fluke data acquisition instruments (.zip)This driver is compatible with these Fluke data acquisition products:2680 Series Data Acquisition Systems2640A NetDAQ Data Acquisition Unit2645A NetDAQ Data Acquisition Unit

    記事
  • 6270A Embedded Software, Update by USB

    6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

    記事
  • 8270A/8370A Embedded Software

    8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

    記事
  • 6105A/6100B Electrical Power Standards Firmware Upgrade

    6105A/6100B Electrical Power Standards Firmware Upgrade (.zip)Documents:6105A/6100B firmware Change History and Installation Instructions (.doc)6105A/6100B Electrical Power Standards Firmware UpgradeThis firmware upgrade is suitable for all 6105A and 6100B units that have 2.xx or 4.xx firmware fitted.Note this firmware upgrade is NOT suitable for the 6105A/610B that currently has 1.xx or 3.xx firmware loaded. This upgrade can only be done at a service center.Note this firmware upgrade is NOT suitable...

    記事
  • CalTool for Analog Free Utility

    CalTool for Analog Free Utility (.exe)TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.00TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.002003.01.27molbox1 (w/MFC option installed) & MFC-CBHelp File IncludedInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionCalTool™ for Analog is used to calibrate the analog circuits of molbox1 and MFC-CB. CalTool for Analog is PC based application that assists in the calibration...

    記事
  • 96270A/96040 Firmware Update

    96270A/96040 Firmware Update (.exe)Documents:96xxx Firmware Release Notes (.doc)96xxx Firmware Upgrade Instructions (.pdf)96270A/96040A RF Reference Source Firmware UpgradeDownload instructions and a list of firmware revision history, new features and resolved issues for the upgrade versions are documented at the link above. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have...

    記事
  • 9640A Firmware Upgrade

    9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

    記事
  • Fluke DPC/Track2 60-Day Trial

    Fluke DPC/Track2 60-Day Trial (.exe)Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke handheld’s documenting features.Using a labor-intensive, manual pen-and-paper system steals valuable resources and wastes time. And there’s also a high probability for measurement errors.With DPCTrack2, calibration time drops by 50% or more. Work assignments and calibration results...

    記事
  • COMPASS® for Pressure Version 4 Release Notes

    Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

    記事
  • CalTool for RPTs Free Utility

    CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

    記事
  • molbox1+ or molbox1+S v6.01 Embedded Software

    molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

    記事
  • 6270A Embedded Software, Update by Serial RS-232 Port

    6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

    記事
  • 超音波リーク・ディテクターから超音波カメラによるエアリークの検出へ

    テキサス州フォート・ワースの郊外に拠点を置く ADG Concepts のアナリスト/デザイナー、ジェイソン・デュプリースト氏によれば、圧縮空気、ガス、真空システムでは、能力を増やすよりも能力を引き上げる方が良いとのことです。コンサルティングから始まって設計、運搬、そして導入に至る ADG のプロジェクトは、1 つの機器の導入から、最大級の製造および生産施設の一部にある大規模な複数の設備や中央システムに至る、さまざまな場面で展開されています。  ...

    記事
  • 2021 年の世界エンジニアリング・デーを祝う

    毎年 3 月 4 日は、世界エンジニアリング・デーです。毎年開催される世界的なこの祝賀行事では、技術者の功績が紹介されています。車輪の発明から火星探査用の探査機に至るまで、技術は、私たちの文化の中で主導的役割を果たしています。そのため、世界エンジニアリング・デーでは、技術の進歩や技術によって現代の生活にもたらされる知恵だけを称賛しているのではありません。この日は、技術をキャリアとして奨励し、世界をより良くするために私たちを鼓舞することも目的としています。...

    記事
  • 1586A Firmware

    1586A Firmware (.zip)TITLEUSE WITH1586A 1.06.01 Firmware1586ATITLE1586A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Corrects an issue with user defined Alarm and Timestamp configuration getting lost.Note: Users of 2680A-APSW...

    記事
  • Temperature and pressure, nuclear fusion calibration at the National Ignition Facility

    The “manufacturing” process here relies on “shots” of laser energy focused on a target the size of a BB.The product: a nuclear reaction six times hotter than the core of the sun . . . and a growing understanding of fusion reactions that could one day free the planet from dependence on dwindling fossil fuels.Here at the National Ignition Facility (NIF) at California’s Lawrence Livermore National Laboratory, scientists are working to create nuclear fusion reactions that unleash more energy...

    記事
  • 10 reasons you need a 1594A or 1595Aa Super-Thermometer

    With ratio accuracy as good as 0.06 ppm (0.000015 °C) the Fluke Calibration Super-Thermometer is sure to become a highly valued instrument in your calibration laboratory. It is an ideal choice for applications that previously required the use of complex and expensive bridges, such as calibrating SPRTs, PRTs, and thermistors.10 reasons to choose the Super Thermometer for your high accuracy temperature measurements.1. Accurate enough for the primary lab, economical enough for the secondary labThe...

    記事
  • How to Accurately Calibrate a Hygrometer

    Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

    記事
  • How to connect a Fluke 729 Automatic Pressure Calibrator to a HART Transmitter

    In this video, we're going to show you how the Fluke 729 Automatic Pressure Calibrator connects to a HART transmitter.TranscriptMenu settingsThe first thing you do is connect up your mA jacks to the transmitter to the plus and minus. Then connect up your pressure line from the Fluke 729 to the transmitter as well. And then press the HART button.You're now on the HART pulling screen; it's trying to find the device. There are two things you need to do here.Enable that 250 ohm internal HART resistorPress...

    記事
  • Fluke 1773, 1775 and 1777 Power Quality Analyzers Software and Firmware

    .sub-title { padding-top: 10px; } .warning { padding: 0 30px; } .hr-warning { margin: 25px 0px 30px 0px; font-size: 1px; line-height: 1px; border-top: 0px solid #ffffff; border-right: 0px solid #ffffff; border-bottom: 1px solid #000000; border-bottom-color: #000000!important; border-left: 0px solid #ffffff; } Fluke Energy Analyze PlusFluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and...

    記事
  • Case study: Innovative Use of Acoustic Imaging in Petrochemical Turnaround

    Marathon Petroleum Company in the U.S. has received an award for their use of acoustic imaging in the turnaround process. The innovation award recognizes Marathon for “improving process safety by deploying a device that detects leaks, which often can’t be seen or heard, through the sound frequencies they emit.” The press release from Marathon continues, “The Fluke Acoustic Imager pinpoints leaks up to 400 feet away and displays them on its LCD screen, using color variations to form a visual...

    記事
  • Helpful tips for inspecting electrical substations

    Inspecting electrical utility substations and lines with thermal imaging. What to expect and what you might find.

    記事
  • How to reach manufacturing excellence with OEE benchmarks

    Highly successful manufacturing plants rank high in availability, performance, and quality. A plant’s most substantial capital investments are in their facilities and equipment, and most manufacturing systems are built to meet a specific capacity level that meets demand. This is why capacity maintenance is critical to the success, and competitiveness, of manufacturing plants today.The more efficiently a company can produce a product, the more products it can produce at a lower cost which results...

    記事
  • Performing high-pressure calibration

    Learn about viscosity, compressibility, head pressure, safety, fluid compatibility, pressure stability, fitting & tube selection, & reference standards.

    記事
  • Buying the right temperature calibration bath for your laboratory

    Learn the questions you should ask before you buy a temperature calibration bath. Learn the 4 key specifications that should be customized for your application.

    記事
  • Automating temperature sensor calibration with the Fluke Calibration 1586A Super-DAQ

    Use the 1586A Super-DAQ to automate temperature sensor calibration The 1586A Super-DAQ Precision Temperature Scanner provides a unique feature for automating sensor calibration that can greatly increase your lab productivity—without a PC and software. When the Super-DAQ is connected to a Fluke Calibration dry-well or fluid bath, it can control the temperature source to run the calibration automatically. You simply program the number of set-point temperatures and their values, select a scan sequence,...

    記事
  • Infrared Temperature Calibration 101

    Learn the basics of infrared temperature calibration including how infrared thermometers work, emissivity, blackbodies, detecting radiance & more.

    記事
  • Understanding and Dealing with High Frequency Error Sources in Oscilloscope Calibration

    Metrologists & calibration technicians deal with a variety of high frequency considerations such matching errors. Understanding how sources of errors in oscilloscope calibration influence the results & how to address them can simplify scope calibration, reduce errors & ease the burden of uncertainty analysis

    記事
  • How End-of-Life Calibrators Can Help You Upgrade to the Newest Technology and Reduce Production Risks

    Owning an end-of-life calibrator presents risks to your business or workflow & can prevent you from leveraging the latest technology. Learn more here.

    記事
  • Three Reasons to Consider a Modular Pressure Control System

    Learn the most common reasons why someone might upgrade to a modular pressure control system for their existing calibration standards.

    記事
  • Now You Can Use MET/CAL™ Software by Itself or With the Asset Management Software of Your Choice

    Learn how MET/CONNECT Calibration Integration Software allows you to use MET/CAL Software without an asset management application or with the one of your choice.

    記事
  • Fluke ii910 産業用超音波カメラ

    コンベアの潜在的な機械的不具合と、電気網の部分放電を特定します。

    製品情報
  • Fluke 190 シリーズ III ScopeMeter® テスト・ツール

    ScopeMeter テスト・ツールは、頑丈なポータビリティと高性能なベンチ・オシロスコープを組み合わせています。

    製品情報
  • Fluke C37XT 保護ハード・ツール・ケース (EVA 製)

    高耐久の仕切り付き EVA フォーム・ケースで、さまざまなマルチメーターを安全に持ち運び可能

    製品情報
  • 43X II PRODUCT Brochure

    ドキュメント