Fluke TL71 Premium Test Lead Set

Fluke TL71 Premium Test Lead Set is rated 2.9 out of 5 by 26.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 47.09ms
  • Fluke TL71
  • Fluke TL71
  • Fluke TL71
  • Fluke TL71

Key features

  • One pair comfort grip probes with right-angle test leads
  • WearGuard ™ indicator exposes contrasting color when damaged
  • Recommended for µV measurements

Product overview: Fluke TL71 Premium Test Lead Set

The Fluke TL71 Premium Multimeter Test Lead Set is a pair of comfort grip probes (red and black) with flexible silicone-insulated, right-angle test leads. These distinctive comfort grip probes are heat and cold resistant.

As with all Fluke products, these test leads undergo a battery of safety tests to be rated at:

CAT II 1000 V, 10 A rating

CAT III 1000 V, CAT IV 600V with protective cap

The WearGuard™ test lead indicator shows wear and tear easier. It exposes a contrasting color when the leads are damaged and need to be replaced. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures.

The Fluke TL71 Premium Test Leads are compatible with all instruments that accept standard 4 mm (0.16 in) shrouded banana connectors. Some of the compatible tools include:

Fluke 902 FC True-RMS HVAC Clamp Meter

Fluke 87V Industrial Multimeter

Fluke 115 Field Technicians Digital Multimeter

Fluke 787B ProcessMeter™

These test leads come with a one-year warranty.

What's in the box:

One pair (red, black) Fluke TL71 Test Leads

Pair of protective caps (red and black)

Specifications: Fluke TL71 Premium Test Lead Set

Lead Length1.2 (4 ft), 2mm diameter probe tip
Category RatingCAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max
Operating temperature-20°C to 55°C (-4°F to 131°F),
90 % RH altitude: 2000 m (6,562 ft)

Models: Fluke TL71 Premium Test Lead Set

Fluke TL71
Buy it
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 134.61ms
  • bvseo-msg: HTTP status code of 404 was returned;
Rated 1 out of 5 by from Poor quality I purchased a set of these TL71 leads and they failed after 2 days. The positive banana plug is stuck in the meter, I did not put any strain on the leads. I'm surprised at this since I own several Fluke meters with various lead sets and I've never had a problem before.
Date published: 2019-01-03
Rated 1 out of 5 by from Poor quality I’ve seen the bad reviews on these before purchase and said let me give it a shot....I had an old pair of fluke leads that I lost...bought these to replace them. 2nd day my red lead bent after applying small pressure..3rd day I got back Feed from testing a modulating gas valve...I’m so disappointed I can’t even begin to explain. I’m going to buy the standard set and hope for the best. If not buy a used older fluke pair like the ones I had...never failed me..after being used and abused...I love or should say (loved) Fluke products..always preferred
Date published: 2018-11-29
Rated 1 out of 5 by from POOR QUALITY The internal part of the plug on the common lead that plugs into the meter broke off inside the meter. I'm sooooooo disappointed to spend almost 20 bucks for 3 months to use.
Date published: 2018-07-28
Rated 1 out of 5 by from Still junk No sign of improvement yet, apparently Fluke doesn't want to acknowledge the poor quality of this lead set. I'm still getting fairly new Fluke meters that ship with this lead set returned to my shop with a detached banana plug from the lead connector lodged inside an input jack on the meter.
Date published: 2017-10-30
Rated 2 out of 5 by from Proves are failing It's my second set of Fluke TL 71 leads. They worked great for 6 months but now the positive lead is completely failing. Either a loose or bad connection inside the lead. Obviously not what I was expecting from Fluke.
Date published: 2017-03-12
Rated 1 out of 5 by from These fail frequently and prematurely I work for a calibration lab and I certify a LOT of hand held meters and you'd be amazed at how many sets of TL71s fail to maintain continuity under mild stresses. And by that I mean a slight tug at the connector end or probe end will often be enough to open the circuit but with no pressure applied, they appear to be okay. The other major failure I'm seeing lately is the banana plug separates from inside the guard and ends up lodged into the meter's input jack(s). Poor build quality. Period. Fluke: please do something about this. Just phase it out and start over.
Date published: 2016-08-30
Rated 1 out of 5 by from Bad quality control I purchased a pair of these from Amazon. The probe is warped. I am returning them. Why is there no quality control?
Date published: 2016-05-12
  • y_2023, m_1, d_29, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasreviews, tv_11, tr_15
  • loc_en_US, sid_3739317698612, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 24.71ms