English

Fluke FEV350 EV Charging Station Analyzer

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.74ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke FEV350 EV Charging Station Analyzer
  • Fluke FEV350 EV Charging Station Analyzer
  • Fluke FEV350 EV Charging Station Analyzer
  • Fluke FEV350 EV Charging Station Analyzer
  • Fluke FEV350 EV Charging Station Analyzer
  • Fluke FEV350 EV Charging Station Analyzer
New

Key features

  • Test the safety and functionality of AC electrical vehicle charging stations with the all-in-one solution
  • Pass/fail test results
  • Auto control pilot (CP) with waveform analysis
  • Compatible with TruTest™ Data Management Software

Product overview: Fluke FEV350 EV Charging Station Analyzer

The FEV350 is a complete solution for safety and performance testing of AC EV charging stations with Type 2 or Type 1 connectors. Designed for technicians required to perform and document multiple tests quickly and efficiently without carrying multiple tools.

Spend less time processing test results and compiling reports with TruTest

  • Easily manage measurement data from EVSE inspections
  • Quickly create inspections and reports
  • Control Pilot waveform analysis with easy pass/fail visuals
  • Compare site data to previous site data to see changes over time
  • Quickly access the latest firmware to update your FEV350
  • Download a free 60-day demo version of TruTest. Purchase a software key to unlock the Lite or Advanced version.

The solution includes TruTest EV Charging software module for documentation and reporting. The solution performs the available measurements below in addition to the supporting measurements with Fluke’s compatible multifunction installation testers for installation certification/inspections via wireless Bluetooth connection, wiring configuration diagrams, and info screens for seamless integration with TruTest software for report generation. The Fluke FEV350 provides predetermined test plans and pass/fail indications on measurement results to simplify analysis and time spent testing. The FEV350 EV Charging Station Analyzer is designed in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722.

Available measurements:
  • PE (protective) earth pre-test to ensure no dangerous voltage is present 
  • Visual Inspection
  • 30 Ma Rcd + 6 Ma Rdc-Dd Trip Test
  • Nominal Voltage + Phase Sequence
  • Auto Control Pilot (Cp) with Waveform Analysis
  • Proximity Pilot
  • Error Testing
Supported measurements with compatible Fluke multi-function testers:
  • Earth Bond
  • Insulation
  • Loop/Line Impedance

See Models tab for different kits including FEV350 for the best package for your needs. Compatible with Bluetooth 5.0

Specifications: Fluke FEV350 EV Charging Station Analyzer

Test function specifications

The operational error specification reference for digit counts is defined as ±(% of reading + digit counts). The operational error for other specifications that reference a % are defined as the % of the reading unless otherwise specified. The operational error specification reference temperature for all readings is 23 °C ±5K temperature coefficient of 0.1 %/°C.

Test/functionDisplay rangeMeasurement rangeOperational errorNominal values
PE pre-test
Touch voltage, safe range50 V AC/DC-50%--
Touch voltage, dangerous range>50 V AC/DC+0%--
Visual inspectionSee checklist
Earth bond, RLO[1]--@ >200 mA Itest
Insulation, RINS[1]--@ 500 V Unom
Loop/Line impedance[1]--no trip loop
RCD/RDC-DD pre-test
Uf5V to 110V -(0 % + 0 digits),
+(10 % + 3 digits)
@ Itest
0.33 x IΔN AC
Re166 Ω to 3667 Ω-10 % to +15 %
RCD test (IΔN 30 mA)
RCD type A, B/B+, RDC-PD--@ mains 100 V AC to 253 V AC
RCD trip time with AC, half wave, DC (0°, 180°)
    x0.5 (30 mA)0 ms to 510 ms±(2 % + 3 ms)
    x1 (30 mA)TN: 0 ms to 310 ms
TT @120 V: 0 ms to 310 ms TT @230 V: 0 ms to 210 ms
    x5 (30 mA)0 ms to 50 ms
Ramp current (0°, 180°)
    AC @RCD type B/B+12.0 mA to 36.0 mA, 17 steps with
1.5 mA
±1.5 mA
    AC half wave @RCD type A and RCD-PD7.5 mA to 48.0 mA, 28 steps with
1.5 mA
    DC @RCD type B/B+12.0 mA to 66.0 mA, 37 steps with
1.5 mA
 
Test/functionDisplay rangeMeasurement rangeOperational errorNominal values
RDC-DD test (IΔN +6 mA EV)
Trip time (0°, 180°)@ mains 100 V AC to 253 V AC
    +3 mA DC0.000 s to 10.100 s±(2 % + 3 ms)
    +6 mA DC
    +60 mA DC0 ms to 310 ms
    +200 mA DC0 ms to 110 ms
Ramp current (0°, 180°)smooth ramp
2.0 mA to 6.0 mA
±0.6 mA
Mains voltage
L-N, L-PE, N-PE0 V to 280 V 0V to 253 V±(3 % + 3 digits)RIN L-N:
>30 MΩ, R
IN L-PE:
>10 MΩ,
40 Hz to 70 Hz,
crest factor 2,
Vmax peak: 560 V
L-L0 V to 490 V0 V to 440 VRIN L-L: >30 MΩ,
40 Hz to 70 Hz,
crest factor 2, Vmax peak: 980 V
Frequency40.00 Hz to 70.00 Hz±0.20 Hz--
Phase sequenceright, left, none--voltage imbalance:
<20 % voltage difference between phases,
phase imbalance:
120° ±10°
50 V to 280 V
phase to N
CP signal analysis
Voltage-15.000 V to
15.000 V
-15.000 V to
-2.000 V,
2.000 V to
15.000 V
±0.5 %RIN: 1 MΩ
0.9000 kHz to
1.1000 kHz;
U
CP+ >2.000 V,
U
CP- <-2.000 V
PWM duty cycle2.0 % to 98.0 %3.0 % to 97.0 %±5 digits
Current indication0.0 A to 80.0 A--Based on duty cycle[3]
Frequency0.9000 kHz to 1.1000 kHz0.001
CP state indicationA, B, C, D--Based on voltage[2]
x1, x2--Based on frequency[2]
 
Test/functionDisplay rangeMeasurement rangeOperational errorNominal values
CP state simulationA-->900  kΩ ±0.2 %--
BUpper level: 4610  Ω
±0.2 %[2]
Nominal level: 2740  Ω
±0.2 %[2]
Lower level: 1870  Ω
±0.2 %[2]
CUpper level: 1723  Ω
±0.2 %[2]
Nominal level: 1300  Ω
±0.2 %[2]
Lower level: 909  Ω
±0.2 %[2]
DUpper level: 448  Ω
±0.2 %[2]
Nominal level: 270  Ω
±0.2 %[2]
Lower level: 140  Ω
±0.2 %[2]
PP state simulationopen-->900  kΩ--
13 A1500  Ω ±1.5 %[2]
20 A680  Ω ±1.5 %[2]
32 A220  Ω ±1.5 %[2]
63 (70) A100  Ω ±1.5 %2]
Error<60  Ω (56 Ω ±5 %)
Fault simulationPE error (earth fault/PE open)------
CP error E @ 0 Ω
or 120 Ω
-0  Ω/ +2  Ω,
120  Ω
±1.5 %[2]
Diode short--
Error D
PP voltage measurement
(Type 2 with socket)
0.10 V to 15.00 V±(1.0 % + 3 digits)RIN: 1 MΩ
 
Test/functionDisplay rangeMeasurement rangeOperational errorNominal values
PP resistor measurement
Type 2 with cable (Rc)50.0 Ω to 499.9 Ω
500  Ω to 5000 Ω
±1.0 %--
Type 1 with cable (S3, R6, R7)
CP resistor measurement (R1)800  Ω to 1200 Ω±1.0 %--
[1]   The test requires a multi-function tester (MFT). See the documentation of the MFT for the display range, measurement range, and operational error or accuracy values.
[2]   According to IEC 61851-1.
[3]   According to table A.8 of IEC 61851-1.
 
General Specifications
Input electrical ratings1 Φ: 250 V max
3 Φ: 230/400V max, 50/60 Hz, max 1 A
Internal power consumption3 W max
Size (H x W x D)~(263 mm x 123 mm x 63 mm)
~(10.35  in x 4.84 in x 2.48 in), without the TY1 or TY2 plug
Weight~0.9 kg, without the TY1 or TY2 plug
~1.4 kg, with the TY1 or TY2 plug
Battery4 x AA/IEC LR6 alkaline or IEC HR6 NiMH
Temperature
Operating-10 °C to 40 °C (14 °F to 104 °F)
Storage-20 °C to 50 °C (-4 °F to 122 °F)
Relative humidity
Operating10 % to 85 %, 0 °C to 40 °C
(32 °F to 104 °F), non-condensing
Storageup to 95 %
Wireless radio, Bluetooth 5.0
Frequency range2412 MHz to 2462 MHz
Output power<100 mW
Altitude3000 m
SafetyIEC 61010-1: Pollution Degree 2, IEC 61010-2-030, CAT II 300 V, Protection Class II
PerformanceIEC 61557-1, IEC 61557-6, IEC 61557-7, IEC 61557-10
Ingress protectionIEC 60529: IP40
 
Electromagnetic Compatibility (EMC)
International IEC 61326-1: Basic Electromagnetic Environment, CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
Caution: This equipment is not intended for use in residential environments and may not provide adequate protection to radio reception in such environments. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.

Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.

Models: Fluke FEV350 EV Charging Station Analyzer

FEV350/TY2
FEV350 EV Charging Station Analyzer kit for Type 2 connector
Buy it
FEV350/TY2 includes:
  • FEV350/BASIC Test Analyzer
  • FEV300-CON-TY2
  • Zero Adapter/TY2
  • TPAK Magnetic Hanger
  • Soft Carrying Bag
FEV350/TY2 PRO
FEV350 EV Charging Station Analyzer kit for Type 2 connector with TruTest software license
Buy it
FEV350/TY2 PRO includes:
  • FEV350/BASIC Test Analyzer
  • FEV300-CON-TY2
  • Zero Adapter/TY2
  • TPAK Magnetic Hanger
  • Soft Carrying Bag
  • TruTest Software License
FEV350/TY2/TY1
FEV350 EV Charging Station Analyzer kit for Type 1 and 2 connectors
Buy it
FEV350/TY2/TY1 includes:
  • FEV350/BASIC Test Analyzer
  • FEV300-CON-TY1
  • FEV300-CON-TY2
  • Zero Adapter/TY1
  • Zero Adapter/TY2
  • TPAK Magnetic Hanger
  • Soft Carrying Bag
FEV350/TY2/TY1 PRO
FEV350 EV Charging Station Analyzer kit for Type 1 and 2 connectors with TruTest software license
Buy it
FEV350/TY2/TY1 PRO includes:
  • FEV350/BASIC Test Analyzer
  • FEV300-CON-TY1
  • FEV300-CON-TY2
  • Zero Adapter/TY1
  • Zero Adapter/TY2
  • TPAK Magnetic Hanger
  • Soft Carrying Bag
  • TruTest Software License
FEV350/KIT
FEV350 EV Charging Station Analyzer kit for Type 1 and 2 connectors with 1664 FC Multifunction Tester
Buy it
FEV350/KIT includes:
  • FEV350/BASIC Test Analyzer
  • FEV300-CON-TY2
  • Zero Adapter/TY2
  • TPAK Magnetic Hanger
  • Soft Carrying Bag
  • 1664 FC Multifunction Tester
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 150.81ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 24.1ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.
Chat with ourFluke assistant
Clear Chat