Fluke TL175 TwistGuard™ Test Leads

Fluke TL175 TwistGuard™ Test Leads is rated 4.6 out of 5 by 61.
  • y_2024, m_12, d_2, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_29, tr_32
  • loc_en_US, sid_1699190505524, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.03ms
  • REVIEWS, PRODUCT
  • Fluke TL175 Reduce Tip Exposure
  • Fluke TL175 TwistGuard™ Test Leads Kit
  • Fluke TL175 Retractable Test Leads
  • Fluke TL175 TwistGuard Test Leads

Key features

  • Patented TwistGuard™ reduces tip exposure, and the New WearGuard™ silicone leads indicate when to replace leads
  • Heavy-duty strain relief tested to 30,000+ bends without failure
  • Rated CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A
  • see compatible products below

Product overview: Fluke TL175 TwistGuard™ Test Leads

Twist. Test. Stay Safe.

The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. By simply twisting the test lead the user can change the exposed probe tip length from 19 mm to 4 mm (0.75 in to 0.16 in).

They work well, are very durable, and add a whole new level to safety…along with the ability to twist them to expose the entire probe for more traditional feel while testing”- S.C., verified customer

Patented TwistGuard™ extendable tip

The adjustable tip shroud meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. The correct category rating for the tip exposure being used is always visible on the test leads. This makes the TL175 test leads suitable for use in many environments:

  • CAT II 1000 V
  • CAT III 1000 V
  • CAT IV 600 V

Safety inside and out

WearGuard™ lead wire wear indicator makes it easier to see insulation wear and tear. If the inner, white insulation layer shows through the outer, black layer, damage is indicated, and the leads must be replaced. The silicone insulation withstands high temperatures and remains flexible in cold temperatures. While the universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs.

What's in the box:

  • One pair (red, black) Fluke TL175 TwistGuard™ Test Leads
  • Exposed probe tip length from 19mm to 4mm (0.75 inch to 0.16 inch

Specifications: Fluke TL175 TwistGuard™ Test Leads

Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Exposed probe tip length: 19 to 4 mm (0.75 to 0.16 in)
Environmental ratings: -20°C to 55°C (-4°F to 131°F), altitude: 2000 m (6,562 ft)

TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip.
Conforms to EN61010-031

Models: Fluke TL175 TwistGuard™ Test Leads

Fluke TL175
Fluke TL175 TwistGuard™ Test Leads

Buy it

Are they compatible with the fluke 325 clamp meter?

Asked by: Pc13
Yes, the Product Fluke TL175 TwistGuard™ Test Leads are compatible with the Fluke 325 Clamp Meter.
Answered by: FlukeCorporation
Date published: 2024-01-12
  • y_2024, m_12, d_2, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_1699190505524, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 22.79ms
  • QUESTIONS, PRODUCT
Rated 1 out of 5 by from Short life Three techs and myself got these leads new. They all lasted less than a year and started to show high resistance and can't trust your readings. The leads before lasted 10+ years. Seems that quality has decreased considerably. And now I don't want to even replace these from fluke. Going to try Pomona leads this time.
Date published: 2024-10-03
Rated 1 out of 5 by from Bad leads I have 3 pairs of these leads. Two sets came with the meters I purchased new. Fluke replaced a set of leads when I contacted service department with issues of intermittent high resistance at the lead strain relief at lead. The leads are brand new but not usable have unstable readings. Don’t buy TL175 leads
Date published: 2023-10-27
Rated 2 out of 5 by from Flawed, like all recent fluke probes I've had multiple fluke probes fail at the crimp joint where the cable joins the probe with mild, careful use of the probes. This is not fit for purpose, Fluke really needs to sort out the design of their probes across the board. I would use probe master probes with my fluke meters instead, but they don't fit the clips on the back of my meters.
Date published: 2023-10-08
Rated 4 out of 5 by from Quality test leads! Very good quality test leads. I don’t know why it is not included with multimeter.
Date published: 2023-08-28
Rated 5 out of 5 by from Nice leads Quality leads. I appreciate the twist functionality and the more supple insulation material that makes working with the leads easier/less prone to rats nesting
Date published: 2023-05-18
Rated 3 out of 5 by from Can't be repaired? I struggle to open these. Possibly they are molded? Have anyone succeeded in repairing a set? I have one that is highly unstable - most probably a bad solder or broken cable inside the "exit"...
Date published: 2023-05-17
Rated 5 out of 5 by from Fluke test leads TL175 Very flexible fit my 77 just right and like the adjustable tip lengths
Date published: 2023-04-21
Rated 5 out of 5 by from A Wonderful Addition to Any Fluke Meter You need these leads!!! Outstanding Build Quality!!!
Date published: 2023-02-24
  • y_2024, m_12, d_2, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_29, tr_32
  • loc_en_US, sid_1699190505524, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.51ms
  • REVIEWS, PRODUCT
Please enable cookies to view product reviews.
Chat with ourFluke assistant
Clear Chat