Suchergebnisse

Compact True-RMS meter with large white LED backlight.

Finden Sie potenzielle mechanische Probleme in Fördersystemen und Teilentladungen in Stromnetzen.

Robustes Gehäuse mit EVA-Schaumstoff für den sicheren Transport der meisten Multimeter

Kombinieren Sie die Leistung des tragbaren Gerätetesters Fluke 6500-2 mit der Datenverwaltungssoftware TruTest

ScopeMeter kombinieren Robustheit und Handlichkeit mit der hohen Leistung von Tischoszilloskopen.

Designed for use on the 525B and 7526A Temperature/Pressure Calibrator; also suitable for the 5520A Multi-Product Calibrator

The Fluke 700SC is used to communicate with the Fluke 726, the Fluke 754, and the Fluke Calibration 3130. It allows you to connect these products to a PC. It also can connect a Fluke Calibration dry-well with a 754.

Trend Link V10 is a trend display program that works with the Full version of FlukeDAQ 6.0 (2680A-APSW) collecting and displaying data from any combination of Fluke Data Acquisition products.

The 6332A / 7342A Temperature Calibration Baths are ideal for lab managers and technicians in government, corporate, and independent calibration labs who need a bath with good stability, uniformity, and speed to temperature for calibrating thermometers and sensors of various sizes and shapes.

Der 8270A und der 8370A sind automatische Druckcontroller, mit denen Sie eine Vielzahl unterschiedlicher Drucksensoren kalibrieren können. Zu diesem Zweck stehen Ihnen im Vergleich zu anderen Hochdruckcontrollern doppelt so viele Druckbereiche und eine doppelt so hohe Arbeitsgeschwindigkeit zur Verfügung.

MEMORANDUM FOR U.S. OWNERS AND OPERATORS USING GPS TO OBTAIN UTC TIME (211.91 KB)A recent notice from Homeland Security announces a GPS Week Number Rollover Event scheduled for April 6th, 2019. This event will affect the 910 and 910R products that were purchased before 2007.Dept. of Homeland Security Notice     What will happen?On this date, at the rollover time, some units will lose date information and display a 1999 date for reporting purposes. Frequency deviation data may not be archived within...

END OF SERVICE NOTICE: 1590 and 1575A Super Thermometers (130.61 KB)February 20, 2020 To Fluke Calibration’s 1590 and 1575A Super Thermometer owners: It has been 10 years since the end of life for the 1590 and 1575A Super Thermometers, and Fluke is now announcing the end of service for these obsolete versions of the Super Thermometer will take place on June 30, 2020. Please see  below for the full lifecycle of the products. Fluke model: 1590Introduction: 1998End of life: January 2010End of...

Electrical calibrator end of service (292.58 KB)January 28, 2022To better serve you, we want to make you aware of some important dates regarding the end of extended service support periods for some discontinued calibrators and instruments. Fluke Calibration typically offers extended service support for five years after discontinuing a product’s manufacture. After the extended support period has passed, we can no longer guarantee full service/repair parts to be available, and therefore possibly...

MET/CONNECT v 2.2.0 with MET/CAL v 11.1.0 (2.1 GB)   Document(s): MET/CONNECT 2.2.0 ReadMe (154.98 KB) MET/CAL 11.1.0 ReadMe (450.51 KB) MET/CONNECT Installation Guide (722.31 KB) MET/CONNECT API Reference (825.91 KB) Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.2.0 and MET/CAL version 11.1.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can...

END OF SERVICE NOTICE: 5790A AC Measurement Standard (206.76 KB)July 31, 2020 To Fluke Calibration’s 5790A owners: Today Fluke is notifying you that the extended repair support period for the 5790A is ending December 31, 2020, due to severe parts availability limitations. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full lifecycle of the products.  Year ofFluke...

END OF SERVICE NOTICE: 5800A and 5820A (222.96 KB)February 4, 2020To Fluke Calibration’s original 5800A and 5820A owners:Today Fluke is notifying you that the extended repair and calibration support period for the 5800A and 5820A calibrators is ending June 30th, 2020. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full lifecycle of the products.Year ofFluke ModelIntroductionEnd...

Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Ruska Instruments, founded in 1944 in Houston, Texas, grew from a small manufacturer of PVT (pressure, volume, temperature) instrumentation to a leading global manufacturer of precision laboratory pressure instrumentation.  Its deep tradition of pressure metrology makes it a household name in National Metrology Institutes and in other worldwide organizations with demanding pressure calibration needs.  The Ruska brand features primary pressure standards, transfer standards, air data test sets, accessories,...

Product description:The product is the Fluke 27GHz ‘single-box’ RF calibrator, with Fluke MET/CAL calibration automation software. It provides a unique level of integration through a combination of performance, functionality, signal delivery and measurement capability:Precision signal level and attenuation, high signal purity and low distortion modulationLow phase noise and jitterIntegral power meter readout (thermistor type power sensors)Integral 50MHz frequency counterCalibration oriented user...

Fluke Calibration offers instrument repair and calibration services for electrical and RF calibration equipment through our accredited calibration laboratories in Everett, Washington (see our Authorized Service Centers page for service outside of the US). Our prices are competitive and our turnaround times are excellent.Equipment types include:Frequency countersMulti-product and multifunction calibratorsVoltage, current and resistance calibratorsProcess calibratorsStandard resistorsZener reference...

Fluke Calibration offers pressure calibration and repair services in the United States through our accredited calibration laboratories in Phoenix, Arizona and Everett, Washington. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about...

IntroductionFluke Calibration provides calibration and repair services for the former Hart Scientific line of temperature calibration equipment. Calibration and repair services for baths and industrial calibrators are provided in Everett, Washington, while digital thermometer readouts, 4180 and 4181 infrared calibrators, temperature probes (SPRTs, PRTs, thermistors, reference thermocouples) and other reference standards are calibrated and serviced in American Fork, Utah.Complete an online request...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

Fluke Calibration offers flow calibration and repair services in the US through our accredited calibration laboratory in Phoenix, Arizona. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about these services or to request a quote call...

Machen Sie die Energieeffizienz zum festen Bestandteil Ihrer vorbeugenden Instandhaltung, die sich positiv auf Ihr Geschäftsergebnis auswirkt, die Betriebseigenschaften Ihrer Anlagen verbessert und die Verfügbarkeit steigert.

Liste der 5 wichtigsten Werkzeuge zur Fehlersuche bei industriellen elektrischen Anlagen für Unternehmen ohne Wartungstechniker und Elektrikermeister.

On-the-spot temperature checks using portable thermometers are frequently performed in the field by technicians in order to ensure product quality.

Anwender: Roel van Hees, Operational Maintenance Engineer Unternehmen: TenneT TSO BV Anwendung: Behebung von Problemen bei Schienenklemmen durch Koronaentladungen in einem Umspannwerk in den Niederlanden, die Kommunikationsprobleme am Flughafen Rotterdam Den Haag verursachten Ergebnis: Die Kommunikation zwischen dem Flughafenkontrollturm und den Piloten ist nun wieder normal. Potenzielle Sicherheitsprobleme wurden abgewendet. TenneT erhielt einen Anruf von der Dutch Radiocommunication Agency, um...

Neues Firmware-Update für die Installationstester Fluke 1663 und 1664FC, das die 6-mA-RDC-DD-Prüfungfunktion für Ladestationen für Elektrofahrzeuge (EV) einführt.  Wichtiger Hinweis: Bitte lesen Sie die folgenden Anweisungen sorgfältig durch, bevor Sie mit dem Update fortfahren. Stellen Sie sicher, dass Ihr Installationstester entweder ein Modell Fluke1663 oder 1664FC ist. Dieses Firmware-Update gilt nicht für Fluke 1662 oder frühere Installationsteste.  Überprüfen Sie die aktuelle Firmware-Version...

2680A-904 Trend Link v10, 14 day Demo Download (.zip)Version 10.0Posted April 6, 2015File size: 61.6 MBDescriptionThis is a full-featured Fluke version of Trend Link (2680A-904) by Canary Labs for use with Fluke DAQ V6.0 (2680A-APSW) for use with data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A).This is a 14 calendar-day demonstration program. The download includes the application, user guide (English) and product training tutorial by Canary Labs under...

2638A Firmware (.zip)TITLEUSE WITH2638A 1.06.01 Firmware2638ATITLE2638A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Changed default Auto Record from OFF to ON, instrument will by default record data.Default measurement rate...

MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

96270A/96040 Firmware Update (.exe)Documents:96xxx Firmware Release Notes (.doc)96xxx Firmware Upgrade Instructions (.pdf)96270A/96040A RF Reference Source Firmware UpgradeDownload instructions and a list of firmware revision history, new features and resolved issues for the upgrade versions are documented at the link above. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have...

9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

CalTool for Analog Free Utility (.exe)TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.00TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.002003.01.27molbox1 (w/MFC option installed) & MFC-CBHelp File IncludedInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionCalTool™ for Analog is used to calibrate the analog circuits of molbox1 and MFC-CB. CalTool for Analog is PC based application that assists in the calibration...

Fluke DPC/Track2 60-Day Trial (.exe)Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke handheld’s documenting features.Using a labor-intensive, manual pen-and-paper system steals valuable resources and wastes time. And there’s also a high probability for measurement errors.With DPCTrack2, calibration time drops by 50% or more. Work assignments and calibration results...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

National Instruments LabView® driver for Fluke data acquisition instruments (.zip)This driver is compatible with these Fluke data acquisition products:2680 Series Data Acquisition Systems2640A NetDAQ Data Acquisition Unit2645A NetDAQ Data Acquisition Unit

6003A Firmware Update (.zip)TITLEUSE WITH6003AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBInstallationPut the CD into the computer, wait for autorun and select “Software installation” and “Uploader” or start direct “install\freeware\uploader”.Uninstall...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

Wie der Wechsel von Ultraschall-Leckdetektoren zu visueller Erkennung von Druckluftlecks mit der Industrie-Schallkamera ii900 zu einer höheren Kapitalrendite und einer Optimierung der Kapazität beigetragen hat.

Jedes Jahr findet am 4. März der Weltingenieurtag statt. Dieses jährliche, internationale Ereignis legt ein Augenmerk auf die Leistungen der Ingenieurinnen und Ingenieure. Von der Erfindung des Rades bis hin zu den Mars Exploration Rovern spielt Technik eine wichtige Rolle in unserer Kultur. Aus diesem Grund geht es am Weltingenieurtag nicht nur darum, technologische Verbesserungen und Erkenntnisse zu würdigen, die uns die Technik in unserem modernen Leben bereitstellt. Dieser Tag ist auch dafür...

Mit der Strommesszangen 377 FC und 378 FC und der Fluke Connect Software können Sie Ergebnisse aufzeichnen, analysieren und mit anderen teilen. Trenddaten für vorbeugende Instandhaltung.

To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

1586A Firmware (.zip)TITLEUSE WITH1586A 1.06.01 Firmware1586ATITLE1586A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Corrects an issue with user defined Alarm and Timestamp configuration getting lost.Note: Users of 2680A-APSW...

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

Erfahren Sie mehr über die Anforderungen an Trennschalter ohne Lasttrennung, die nicht zur Unterbrechung des Stroms vorgesehen sind.

.sub-title { padding-top: 10px; } .warning { padding: 0 30px; } .hr-warning { margin: 25px 0px 30px 0px; font-size: 1px; line-height: 1px; border-top: 0px solid #ffffff; border-right: 0px solid #ffffff; border-bottom: 1px solid #000000; border-bottom-color: #000000!important; border-left: 0px solid #ffffff; } Fluke Energy Analyze PlusFluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and...

Continuously monitoring asset health is critical to avoiding unplanned downtime. Fluke devices help you track conditional change 24/7 and are easy to install.

So können Sie mit dem Luftleckdetektor ii900 Acoustic Imager die Grundursache von Geräteproblemen ermitteln und kostspielige Ausfallzeiten vermeiden.

2271A Embedded Software, Update by USB (zip)TITLEUSE WITH2271A2271AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 2271ABegin by clicking on the Get software button. Then download the zip file by clicking the 2271A v10x USB.zip...

Purchasing calibration management software? See 13 questions you should ask before you buy to make sure you get the best return on investment.

Organizational goals are translated into manufacturing/ process requirements. Increasingly individuals and organizations depend on others to meet those requirements, and the tools they use may not all be compatible

Temperature measurement is a critical parameter in many industrial processes. As a result, these processes generally use installed thermometers or temperature transducers. Proper calibration of these installed systems has always presented a challenge. Traditionally, simulators are used to provide in-situ calibration of the electronic portions of these systems. Although this is a valid technique for the calibration of the electronics, considerable inaccuracies are introduced by the sensor itself.The...

The “manufacturing” process here relies on “shots” of laser energy focused on a target the size of a BB.The product: a nuclear reaction six times hotter than the core of the sun . . . and a growing understanding of fusion reactions that could one day free the planet from dependence on dwindling fossil fuels.Here at the National Ignition Facility (NIF) at California’s Lawrence Livermore National Laboratory, scientists are working to create nuclear fusion reactions that unleash more energy...

Temperature metrology experts from Fluke Calibration attended Tempmeko 2019 and provide an overview of the top 5 topics covered there, including some photos.

Learn the basics of infrared temperature calibration including how infrared thermometers work, emissivity, blackbodies, detecting radiance & more.

See why Fluke makes the best liquid bath calibrators & sells the most. Excelling in range of baths, controllers, automation, technology, mixing, & maintenance.

Nach der Einstellung des 6003A ist der Leistungs- und Netzqualitätskalibrator 6130B der geeignetste Nachfolger. Wally Miller, Produktexperte von Fluke Calibration, vergleicht die beiden Instrumente und erklärt, warum der 6130B Ihnen ein noch besseres Preis-Leistungs-Verhältnis bietet.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

 I just watched this “Fluke Takes Flight” video, in which Fluke Calibration customer Pete Burgio gives us insights into his life and his career as a lead calibration technician for a major airline. One of the things I found interesting is that Pete uses the word “trust” several times throughout the video. That got me thinking about how important it is to trust the measurements we make. And how calibration is a vital part of that ensuring that trust.Calibration helps keep our world up, running...

The first version of MET/CAL that I saw was version 0.86 – it was a pre-release. I was working at the Fluke/Philips service center from 1990 to 1994, here in Holland. In the beginning of the 90’s in this lab they started using MET/CAL, starting on very simple PCs, now it is one of the most advanced labs in using MET/CAL.

Fluke Calibration offers free, online ISO 17025 training to address the 2017 changes in the form of this article and training webinars. Get the info here.

Find the best Fluke Calibration industrial temperature calibrator for your workload.

Consider if your company would be best served by specifying traceability to the SI instead of to your local NMI.

In this article, electrical calibration expert Marty Kidd explains why someone needs this type of product. He also explains why owners of an old Fluke 5790A should consider moving up to a new 5790B.

Learn the 3 methods of deadweight tester and piston gauge gravity correction in this brief app note.

When does height equal pressure? Well the simple answer is it doesn't, but more on that later. A less simple answer is that height based pressure unit standards for manometers have evolved significantly over time. This has left an interesting legacy that you need to be aware of if you calibrate pressure instruments using height based units.

If you measure or calibrate pressure in the real world, you are at risk for contamination. And contamination can cause problems that you don’t even want to think about. A manufacturer in the aerospace industry found that out when they used their air system to calibrate a gauge that had water in it, then used it to calibrate another device that was supposed to be “dry and air pure.”

This page contains links to 9640A Series related product manuals, including a getting started guide and instruction manual. Product Manuals 9640A/9640A-LPNX RF Reference Source Getting Started Manual 9640A/9640A-LPNX RF Reference Source Getting Started Manual Supplement 9640A/9640A-LPNX RF Reference Source Instruction Manual 9640A/9640A-LPNX RF Reference Source Instruction Manual Supplement 9600FLT 1-GHz Wide Offset Phase Noise Filter Instruction Sheet 9640A, 9640A-LPN & 9640A-LPNX...

Unit of Measure Converter Free Utility (.exe)TITLEVERUSE WITH Unit of Measure Converter Free Utility2.01a2006.08.15All Products Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe Unit of Measure Converter is a free ActiveX control distributed by Fluke Calibration. This program can be run stand alone or built into other applications. Use the [Show Help] menu choice for details on using this tool.Warning - Fluke Calibration has made...

RPM4-AF v1.00b Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AF™1.00b2010.09.22RPM4-AFDo Not use with RPM4, RPM4-AD or RPM4-EDWT or RPM4 in ADCS!Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Hi, this is Jeff Grossman, Sales Engineer for Fluke Calibration’s pressure and mass flow calibration solutions, here to provide you with a demonstration of one of our three modular pressure controllers. I happen to have here the 8270A which has a maximum pressure of 6000 psi complemented by the 6270A maximum pressure of 3000 psi and the 8370A with maximum pressure of 15,000 psi. The nice thing is they share a lot of commonality which makes them easy to switch between and easy to use.Very small...

Table of ContentsWhy is calibration important?The importance of calibration in the futureDifferent perspectives on the significance of calibrationThe benefits and purpose of calibrationWhat are the costs and risks of not calibrating?Summary / TL;DRWhy is calibration important?Calibration is important because it helps ensure accurate measurements, and accurate measurements are foundational to the quality, safety and innovation of most products and services we use and rely on every day.Few people realize...

World Metrology Day 2014A message from Fluke Chief Corporate Metrologist Jeff GustWorld Metrology Day commemorates the signing of the Meter Convention on May 20, 1875. Those who are dedicated to metrology, the science of measurement, recognize this day each year as their time to celebrate the importance of measurements. Fluke Corporation joins enthusiastically in this annual celebration, as we have a long history of dedication to metrology. The theme for World Metrology Day 2014 is “Measurements...

There are three common methods for calibrating temperature sensors:Calibrating just the electronics with a simulatorCalibrating both the electronics and the sensor in a dry-wellCalibrating both the electronics and the sensor in a dry-well with a reference thermometerHere is a quick look at these methods and the pros and cons of each.Calibrating just the electronics with a simulatorTo calibrate the electronics of a temperature measurement/control system, a temperature simulator takes an input temperature...

World Metrology Day 2012 MessageWorld Metrology Day commemorates the signing of the Meter Convention on May 20, 1875. Those who are dedicated to metrology, the science of measurement, recognize this day each year as their time to celebrate the importance of measurements. The theme for World Metrology Day 2012 is “Metrology for Safety.” Fluke Corporation, one of the world’s leading metrology companies, is dedicated to facilitating workers’ safety through test and measurement tools as well...

Anyone who has been in the calibration business for as long as we have knows that experience is priceless. Time has a way of teaching you what works and what doesn’t. When things are working right, the cal lab may not be a very exciting place, but it does mean you did your job. So, here are a few tips and tricks you can use to keep things up and running:The truth about calibrating temperature sensorsCalibration baths usually deliver the best resultsBoost productivity with multiple calibration bathsProtect...

.super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; font-size: 10px; -webkit-tap-highlight-color: transparent } .super-custom body { font-family: "Helvetica Neue",Helvetica,Arial,sans-serif;font-size:14px;line-height:1.42857143;color:#333;background-color:#fff;margin:0}.super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup,...

PG7000/PG9000 Ver 3.1.5.255 Embedded Software (.bin)TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.Instructions:The PG7000/PG9000 firmware versions 3.00 and newer are intended to work with all PG9000 models and PG7000 models with serial numbers 733 or newer. Do not attempt to upgrade an older PG7000 model with this software. This upgrade does not...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your Fluke 700HPPK/700HPM. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have any questions, please do not hesitate to contact us. https://www.fluke.com/en-us/support/technical-support

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

RPM4-E-DWT v1.00c Embedded Software (.bin)TITLEVERUSE WITHE-DWT1.00c2014.08.06RPM4-E-DWTInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

RPM4-E-DWT A70M/A7M-AF Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-E-DWT A70M/A7M-AF™1.00c2012.05.01RPM4-E-DWT-AFDo NOT use with NON "-Af"RPM4-E-DWT Models!Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If...

RPTLoad Free Utility (.exe)TITLEVERUSE WITHRPTLoad™ Free Utility1.04cAll products with quartz crystal based RPTs or Q-RPTsInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe RPTLoad program is designed to transfer RPT coefficients to and from DHI products. In addition to updating coefficients, RPTLoad can also be used to configure RPM1 reference pressure monitors.Updates Include:Ver 1.04c (03 OCT 20)FIX: Corrected support of BG TYPE...