搜尋結果

可用一個轉接器檢查接地故障、電線絕緣、電壓和工作週期。

專用於測試 EV 充電站交流充電模式 3 的功能和安全性。

完整的套件可讓您高效地根據所有當地法規進行測試，而無需開啟充電站。

Connect the instrument to an available RS-232 port and start the IO Toolkit software.

COMPASS® for Pressure Calibration Software is a universal platform for all of your pressure calibration software needs.

Fluke Networks 更換遠端 ID #1 / LinkIQ™ 接線圖工具

Fluke Networks 工業連接器轉接器套件

交流 EV 充電站安全和效能測試的完整解決方案

測試導線附件套組，適用於電線和電路追蹤和疑難排解應用。

耐用的 EVA 泡棉箱及隔板能夠安全攜帶各種萬用電表

適用於 Fluke 28 II Ex 本安型數位萬用電表的 440 毫安培保險絲更換組件

適用於 Fluke 測試儀的更換保險絲，適用機型包括 Fluke 1507 和 Fluke 1503。

定位輸送裝置的潛在機械問題以及電網的局部放電狀況。

如果有一種偵測洩漏技術可以遠從 50 公尺外準確找出洩漏位置該有多好？在尋找壓縮空氣洩漏方面，Fluke ii900 聲能工業成像器改變了遊戲規則。

END OF SERVICE NOTICE: 1590 and 1575A Super Thermometers (130.61 KB)February 20, 2020 To Fluke Calibration’s 1590 and 1575A Super Thermometer owners: It has been 10 years since the end of life for the 1590 and 1575A Super Thermometers, and Fluke is now announcing the end of service for these obsolete versions of the Super Thermometer will take place on June 30, 2020. Please see  below for the full lifecycle of the products. Fluke model: 1590Introduction: 1998End of life: January 2010End of...

END OF SERVICE NOTICE: 5800A and 5820A (222.96 KB)February 4, 2020To Fluke Calibration’s original 5800A and 5820A owners:Today Fluke is notifying you that the extended repair and calibration support period for the 5800A and 5820A calibrators is ending June 30th, 2020. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full lifecycle of the products.Year ofFluke ModelIntroductionEnd...

Download MET/CAL version 11.0.2 Hot Fix (.zip)Download MET/CAL version 11.0.2 ReadMe (.pdf)Current MET/CAL Customers:The MET/CAL 11.0.2 Hot Fix release is an update to previous MET/CAL software. This update includes a bug fix for the 5540A/5550A/5560A FSCs.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.0.2.Follow the instructions in the MET/CAL 11.0.2 Hot Fix readme file...

身為電氣安裝與維護專業人員，您想必知道，測試的效率與準確度至關重要，必須嚴謹看待。但是，相關作業不應該耗費您一整個工作天。我們與電氣技師與維修專家合作，共同面對那些會妨礙生產力的挑戰。

11/15/24 - reindex - LF

END OF SERVICE NOTICE: 5700A and 5720A (211 KB)February 5, 2020 To Fluke Calibration’s 5700A and 5720A Series owners: Today Fluke is notifying you that the extended repair support period for the 5700A Series I and II and 5720A calibrators is ending June 30th, 2020, due to severe parts availability limitations. This date is well beyond the five years of extended support Fluke Calibration offers after discontinuing a product’s manufacture (End of Life). Please see the table below for the full...

Update: MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (.zip)MET/CAL 11.0.2 Read Me (.pdf)Current MET/CAL Accuracy Files (.zip)Default Comm Settings File (Place in Shared Directory) (.zip) This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 11.0.2 release is an update to previous MET/CAL software. This update includes bug fixes.Do not manually uninstall the previous version. If you do this before attempting...

Fluke Calibration offers pressure calibration and repair services in the United States through our accredited calibration laboratories in Phoenix, Arizona and Everett, Washington. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about...

1594A_1595A Calibration Constant Notification.pdf (97.63 KB)It was discovered that when a customer selects the “Restore Factory Default” button in the Config menu, the resistor calibration values are reset to the default values without requiring a password or notification to the customer that the values are being reset. The resistor calibration values are the instrument’s main calibration and the reset may cause out of tolerance measurements. Engineering has investigated this issue and the...

Update: MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (.zip)MET/CAL 11.0.2 Read Me (.pdf)Current MET/CAL Accuracy Files (.zip)Default Comm Settings File (Place in Shared Directory) (.zip) document.getElementsByClassName("field-caption-wrapper")[0].innerHTML = "MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (1.6 GB)"; This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 11.0.2 release is an update...

Hot Fix: MET/CAL version 11.0.2 Hot Fix 2 (.zip)Hot Fix: MET/CAL version 11.0.2 Hot Fix 2 Read Me(.pdf)Current MET/CAL Customers:The MET/CAL 11.0.2 Hot Fix 2 release is an update to previous MET/CAL software. This update includes a bug fix for legacy calibrator FSCs. It also includes the fix from the previous Hot Fix.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.0.2.Follow...

瞭解在面積 13,935 平方公尺、有將近 400 個工具透過一個 200 馬力壓縮機提供的壓縮空氣運轉的場所中，氣體洩漏偵測設備如何避免停機時間。

即使是最小的氣體洩漏也會造成產品和能源浪費並損失生產時間，特別時對完全仰賴壓縮空氣驅動其工具與程序的生產線而言。

Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Ruska Instruments, founded in 1944 in Houston, Texas, grew from a small manufacturer of PVT (pressure, volume, temperature) instrumentation to a leading global manufacturer of precision laboratory pressure instrumentation.  Its deep tradition of pressure metrology makes it a household name in National Metrology Institutes and in other worldwide organizations with demanding pressure calibration needs.  The Ruska brand features primary pressure standards, transfer standards, air data test sets, accessories,...

太陽能專家指引如何設計和試運轉光電系統，以達到最大效能，包括設備壽命、安全性和投資報酬率。

IntroductionFluke Calibration provides calibration and repair services for the former Hart Scientific line of temperature calibration equipment. Calibration and repair services for baths and industrial calibrators are provided in Everett, Washington, while digital thermometer readouts, 4180 and 4181 infrared calibrators, temperature probes (SPRTs, PRTs, thermistors, reference thermocouples) and other reference standards are calibrated and serviced in American Fork, Utah.Complete an online request...

Fluke Calibration offers instrument repair and calibration services for electrical and RF calibration equipment through our accredited calibration laboratories in Everett, Washington (see our Authorized Service Centers page for service outside of the US). Our prices are competitive and our turnaround times are excellent.Equipment types include:Frequency countersMulti-product and multifunction calibratorsVoltage, current and resistance calibratorsProcess calibratorsStandard resistorsZener reference...

Fluke Calibration offers flow calibration and repair services in the US through our accredited calibration laboratory in Phoenix, Arizona. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about these services or to request a quote call...

Fluke Calibration provides calibration and repair services for humidity calibration equipment through our accredited calibration laboratories in American Fork, Utah (5128A RHapid-Cal® Humidity Generator and 1620A Digital Thermometer-Hygrometer) and Phoenix, Arizona (2456-LEM Laboratory Equipment Monitor). Our prices and turnaround times are competitive and our quality and capabilities are unmatched.For more information about these services or to request a quote, call 877-355-3225 or email us at...

Hot Fix: MET/CAL version 11.1.0 Hot Fix 3 (.zip)Hot Fix: MET/CAL version 11.1.0 Hot Fix 3 Read Me (.pdf)Current MET/CAL Customers:The MET/CAL 11.1.0 Hot Fix 3 release is an update to previous MET/CAL software. This update includes bug fixes. It also includes the fixes from the previous Hot Fixes.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.1.0.Follow the instructions in...

用最簡單的方式來說，示波器和數位萬用電表 (DMM) 的差異，簡單來說就像是圖片與數字的區別。進一步瞭解，包括各個工具的使用時機。

瞭解居家和建築檢測用的熱影像儀。尋找適合 HVAC 的最佳熱影像儀。

輸送裝置維護必須有效率，才能避免昂貴的非計畫性停機時間。這對食品與飲料生產、物流倉儲、汽車製造、採礦和原料處理等產業而言尤其重要。 具備 MecQ™ 模式的 Fluke ii910 精準聲學成像儀提供一個現代化的解決方案。它可以在輸送系統中的潛在問題惡化之前偵測到它們。這使得維護團隊能夠採取積極步驟並讓系統效能最大化。 Fluke MecQ™ 模式可以發現可能對輸送系統造成問題的聲音。您來親眼見證！...

重要安全性通知：Fluke 8x 系列 V 數位萬用電表

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

Hot Fix: MET/TEAM version 2.3.0 Hot Fix 2 (.zip)This Hot Fix is to resolve an issue that causes failures to save MET/CAL results data when using Windows Authentication. If you do not use Windows Authentication, this is not a necessary update.Current MET/TEAM Customers:The MET/TEAM 2.3.0 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations...

Hot Fix: MET/CAL version 10.2.2 Hot Fix (.zip)Documents:MET/CAL version 10.2.2 Hot Fix Readme (.pdf)This hot fix applies to both MET/TEAM and MET/CONNECT versions of MET/CAL.Current MET/CAL Customers:The MET/CAL 10.2.2 Hot Fix release is an update to previous MET/CAL software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on each MET/CAL Client PC.Do not uninstall MET/CAL 10.2.2.Follow the instructions...

Hot Fix: MET/TEAM version 3.0.0 Hot Fix 2 (.zip)Documents:MET/TEAM version 3.0.0 Hot Fix 2 Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.0.0 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes bug fixes only. It includes all items resolved in the first MET/TEAM 3.0.0 Hot Fix.After installing this Hot Fix, you must install MET/CAL version 10.4.0. This Hot Fix is not compatible with MET/CAL version 10.2.xThis download does not include an installer. The included...

Hot Fix: MET/TEAM version 3.0.0 Hot Fix (.zip)Documents:MET/TEAM version 3.0.0 Hot Fix Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.0.0 Hot Fix release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/TEAM server.Do not uninstall MET/TEAM 3.0.0.Follow the instructions in the MET/TEAM 3.0.0 Hot Fix readme file to install this update.New...

MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

FlukeView® Forms Demo/Reader Software Downloads (.exe)You can download the free Demo/Reader version of FlukeView® Forms from this page. It allows you to open any FlukeView® Forms file and view or edit data that has been saved by a FlukeView® Forms user. It also allows you to see how data can be displayed, formatted, printed and saved in FlukeView® Forms.This demonstration software does not include the FlukeView® Forms Designer, which allows you to customize your forms.System Requirements for...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

使用 Fluke ii900 工業聲波成像儀 讓氣動工具效能最大化。快速輕鬆診斷壓縮空氣線路中的壓力下降和氣流問題。

局部放電的定義。瞭解局部放電如何發生、局部放電的原因，以及 4 種主要的局部放電類型。

誰發明了萬用電表？從電流計和電壓計，到配備熱成像和無線功能的數位萬用電表。Fluke 萬用電表的型號歷史。

在規格與功能方面，查看 Fluke ii900 與 ii910 聲波成像儀的差異。

使用 Fluke ii910 精密聲波成像儀 進行局部放電測試與監控。瞭解如何進行局部放電測試程序。

瞭解如何使用 Fluke 萬用電表和示波器診斷老舊電氣系統的電力品質問題。

If you are purchasing a calibrator to calibrate pressure measurement devices, follow these 2 simple steps to ensure you get what you need.

To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

The “manufacturing” process here relies on “shots” of laser energy focused on a target the size of a BB.The product: a nuclear reaction six times hotter than the core of the sun . . . and a growing understanding of fusion reactions that could one day free the planet from dependence on dwindling fossil fuels.Here at the National Ignition Facility (NIF) at California’s Lawrence Livermore National Laboratory, scientists are working to create nuclear fusion reactions that unleash more energy...

.sub-title { padding-top: 10px; } .warning { padding: 0 30px; } .hr-warning { margin: 25px 0px 30px 0px; font-size: 1px; line-height: 1px; border-top: 0px solid #ffffff; border-right: 0px solid #ffffff; border-bottom: 1px solid #000000; border-bottom-color: #000000!important; border-left: 0px solid #ffffff; } Fluke Energy Analyze PlusFluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and...

In 2012, the Association of German Engineers developed VDI/VDE-2623, which defines and establishes a Calibration Data Exchange Format. VDI/VDE-2623 establishes a rigid Extensible Markup Language (XML) data structure with both required and optional fields

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

Learn about viscosity, compressibility, head pressure, safety, fluid compatibility, pressure stability, fitting & tube selection, & reference standards.

There are a few instruments used to perform infrared (IR) thermometer and IR imager calibration. These instruments fall into two categories, cavities and flat-plates. To calculate the uncertainty in using these instruments, the temperature uniformity must be known. This is especially true with flat-plates. This uncertainty may be given in an instrument’s specification. However, there is not a standardized test method to test the uniformity of a flat-plate calibrator as there is with other classes...

Learn the basics of infrared temperature calibration including how infrared thermometers work, emissivity, blackbodies, detecting radiance & more.

See why Fluke makes the best liquid bath calibrators & sells the most. Excelling in range of baths, controllers, automation, technology, mixing, & maintenance.

Learn the most common reasons why someone might upgrade to a modular pressure control system for their existing calibration standards.

Learn how MET/CONNECT Calibration Integration Software allows you to use MET/CAL Software without an asset management application or with the one of your choice.

Fluke Calibration ceased production and sale of the 6003A Three Phase Electrical Power Calibrator and its specific accessories and options. Fluke introduced this model in 2014 as a competitive power calibrator capable of supplying accurate 3 phases of current and voltage.

Save time and money by using a 1586A Super-DAQ and a Fluke Calibration dry-well, fluid bath, or furnace to automate the calibration of up to 40 temperature sensors—simultaneously, without requiring a PC or software.

Learn 3 ways to calibrate a PT100 and a basic, 5-step procedure. Also discover how to bring calibration in house along with the benefits and challenges.

Get answers to common questions about the safety of a high-pressure supply & the capabilities of the Fluke 8270A/8370A High-Pressure Controller/Calibrator.

Get guidance on how to verify the performance of the capacitance function of the 8588A including methodology, measurement process, and pitfalls that can occur.

Discover Fluke resources on how & why to prevent contamination in pressure calibration including videos, webinars, and blog posts. Learn more here.

This page contains links to a range of short videos that quickly and conveniently highlight some of the simplifications, efficiencies and automation that Fluke Calibration brings to RF and microwave calibration.An Overview of the 9640AFluke Calibration’s innovative calibration technology, now applied to RF and microwave calibration, greatly simplifies what is often a labor-intensive task with a powerful combination of the 9640A RF Reference and MET/CAL Calibration Software. The first video highlights...

Fluke MET/CAL procedures to calibrate a digital multimeter. Watch the video to see how the MET/CAL software walks you through the process.

Owning an end-of-life calibrator presents risks to your business or workflow & can prevent you from leveraging the latest technology. Learn more here.

Metrologists & calibration technicians deal with a variety of high frequency considerations such matching errors. Understanding how sources of errors in oscilloscope calibration influence the results & how to address them can simplify scope calibration, reduce errors & ease the burden of uncertainty analysis

Fluke Calibration offers free, online ISO 17025 training to address the 2017 changes in the form of this article and training webinars. Get the info here.

Find the best Fluke Calibration industrial temperature calibrator for your workload.

This deadweight tester (DWT) selection guide by Fluke is intended to simplify the process of selecting the right deadweight tester for your application.

There is a lot to consider when deciding how to connect the DUT to the reference. Here is what I like to think about when getting ready to design a pressure circuit.

Learn the 3 methods of deadweight tester and piston gauge gravity correction in this brief app note.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Choosing a bath should not be that difficult but there are a lot of choices. For some, it’s unfamiliar territory and in that case, I thought you might like to have a map.

The triple point of argon (83.8058 K ) is one of the most commonly used fixed points for the calibration of standard platinum resistance thermometers (SPRTs) at temperatures below 273.16 K. It’s a defining fixed point of the International Temperature Scale of 1990 (ITS-90). Fluke Calibration recently designed a new Triple Point of argon system with the goal in mind of achieving both efficiency and accuracy in calibrating SPRTs.

When does height equal pressure? Well the simple answer is it doesn't, but more on that later. A less simple answer is that height based pressure unit standards for manometers have evolved significantly over time. This has left an interesting legacy that you need to be aware of if you calibrate pressure instruments using height based units.

This page contains links to resources to help you learn more about using MET/CAL Plus Calibration Management Software Version 8.0, especially if you have downloaded the trial version of the software.

Update: MET/CAL version 10.6.1 for MET/TEAM version 3.2.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.0 for MET/CONNECT version 2.0.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available with the MET/TEAM 3.1.0 installer.Current MET/CONNECT Customers:MET/CAL version 10.5.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and...

Update: MET/CAL version 10.4.0 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 2.0.0 installer.Current MET/TEAM Customers:MET/CAL version 10.4.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.You must install MET/TEAM version 3.0.0 Hot Fix 2 to use MET/CAL 10.4.0.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.1 for MET/CONNECT version 2.1.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.1 for MET/TEAM version 3.1.1 or 3.1.0 (.zip)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers:MET/CAL version 10.5.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be...