Fluke T5-600 and 62 MAX+ Electrical and HVAC Kit
- Automatically measures volts ac and volts dc with precise digital resolution.
- Displays resistance to 1000?.
- Easy and accurate OpenJaw™ current measurement.
- Continuity beeper.
- Rugged enough to withstand a 10-foot (3m) drop.
- 600V model.
- Auto off mode to conserve battery life.
- AC current.
- Display hold.
- All inputs of the T5-600 are protected to EN61010-1 CAT III 600V. UL, CSA and VDE listed.
Fluke 62 MAX+. Small in size. Big on toughness.
- Dust and water-resistant: IP54 rated.
- Rugged: 3-meter (9.8-foot) drop tested.
- Ergonomically designed: Completely redesigned for a more natural hand fit.
- Distance to spot: 12:1.
- Dual lasers: Identifies area to be measured.
- Large, backlit display: Makes data easier to read, even in dark areas.
- C115 Deluxe Soft Carrying Case with Shoulder Strap.
Product overview: Fluke T5-600 and 62 MAX+ Electrical and HVAC Kit
This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.
Specifications: Fluke T5-600 and 62 MAX+ Electrical and HVAC Kit
Fluke T5-600 Voltage, Continuity and Current Tester
|Jaw opening||12.9 mm (0.5 in)|
|Max wire size||1/0 THHN Cable|
|Current range AC rms||0 to 100.0 A|
|Accuracy AC current (50/60 Hz)||3% ± 3 counts|
|Voltage range AC/DC||0 to 600 V|
|Voltage accuracy||AC||1.5% ± 2 counts|
|DC||1% ± 1 count|
|Resistance range||0 to 1000 Ω|
|Continuity beeper threshold||On at < 25 Ω, off at > 400 Ω|
|Volts indicator LED threshold||Guaranteed on by 30 V AC|
|Operating temperature||-10°C to 50°C|
|Storage temperature||-30°C to 60°C|
|Humidity (without condensation)||0% to 95% (5°C to 30°C)|
|0% to 75% (30°C to 40°C)|
|0% to 45% (40°C to 50°C)|
|Operating altitude||2000 meters max|
|Temperature coefficient||0.1 x (specified accuracy)/°C (< 18°C or > 28°C)|
|Overvoltage category||CAT III 600 V AC/DC (EN61010-1)|
|Agency approvals||UL, CSA, and VDE|
|Maximum voltage||Between any terminal and earth ground|
|Mechanical and general specifications|
|Size||30.5 x 51 x 203 mm|
|Battery life||200 hour zinc chloride, 400 hour alkaline|
|Battery type||2 x AA|
|Low battery indicator||Yes|
|Current sensor opening||12.9 mm|
|Calibration cycle||1 year|
|Test leads||Type||Heavy duty, flexible leads rated for 1000 V use.|
|Field replaceable leads terminate in male shrouded banana plugs|
|Probes||One red, one black.|
|Detachable Slim-Reach™ probe tips|
|Styles||TP1 Slim Reach™ Test Probes|
Fluke 62 MAX+ Infrared Thermometer
|Temperature range||-30°C to 650°C (-22°F to 1202°F)|
|Accuracy||±1.0°C or ±1.0% of reading, whichever is greater|
-10°C to 0°C: ±2.0
-30°C to -10°C: ±3.0
|Response time (95%)||< 500 ms (95% of reading)|
|Spectral response||8 to 14 microns|
|Emissivity||0.10 to 1.00|
|Optical resolution||12:1 (calculated at 90% energy)|
|Display resolution||0.1°C (0.2°F)|
|Repeatability of readings||±0.5% of reading or <±0.5°C (1°F), whichever is greater|
|Battery life||8 hours with laser and backlight on|
|Weight||255 g (8.99 oz)|
|Size||175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)|
|Operating temperature||0°C to 50°C (32°F to 122°F)|
|Storage temperature||-20°C to 60°C (-4°F to 140°F), (without battery)|
|Operating humidity||10% to 90% RH non-condensing at 30°C (86°F)|
|Operating altitude||2000 meters above mean sea level|
|Storage altitude||12,000 meters above mean sea level|
|IP rating||IP 54 per IEC 60529|
|Drop test||3 meters|
|Vibration and shock||IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms|
|EMC||EN 61326-1:2006 EN 61326-2:2006|
|Standards and agency approval||Compliance||EN/IEC 61010-1: 2001|
|Laser safety||FDA and EN 60825-1 Class II|