Fluke FoodPro Plus Thermometer Replacement Probe

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 22.97ms
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke FoodPro Plus Thermometer Replacement Probe 1
  • FoodPro Infrared Food Thermometer
  • Fluke FoodPro Infrared Food Thermometer

Key features

Fluke FoodPro Plus Food Safety Thermometer

The Fluke FoodPro Plus combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings. An integrated countdown timer with alarm monitors line checks as well as cooking and cooling intervals.

Includes all of the FoodPro features, plus the following:

  • Built-in fold-out probe for measuring internal food temperatures
  • Probe temperature range -40 to 200 °C
  • Countdown timer to monitor cooking, cooling and HACCP exposure times
  • Backlit display for clear readings in poorly lit areas
  • MAX temperature displayed for quick reference
This product is discontinued or reclassified

Product overview: Fluke FoodPro Plus Thermometer Replacement Probe

Fluke brings its test and measurement equipment expertise to the foodservice industry with contact and non-contact temperature measurement solutions. The Fluke FoodPro Plus thermometerprovides a complete temperature measurement and monitoring solution for foodservice professionals. It includes one useful temperature inspection tool, which is designed to enable foodservice professionals to quickly and accurately measure food product temperatures and to help detect potential food safety problems.

The Fluke FoodPro Plus combines the same infrared surface temperature scanner, as well as a probe thermometer and integrated countdown timer for complete inspections of food temperatures and monitoring cooking and cooling intervals.

The Fluke FoodPro Plus thermometer is hand-washable and features unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.

Useful applications

  • Receiving: Use FoodPro Plus thermometer to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
  • Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures.
  • Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements.
  • Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs.
  • Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste.

Specifications: Fluke FoodPro Plus Thermometer Replacement Probe

Infrared Specifications
Temperature-35°C to 275°C
Accuracy(Assumes ambient operating temperature of 23°C ±2°)
Between 0°C and 65°C: ±1°C
Below 0°C: ±1° ±0.1 degree/degree
Above 65°C): ±1.5% of reading
Response time< 500 ms after initial reading
Spectral response8-14 microns
EmissivityPre-set for foodservice applications
Distance to spot size/Optical resolution (D:S)2.5:1 @ 90% energy, typical
Typical working range (target illumination)≈25 mm to 250 mm
Minimum target size12 mm ø
Illumination to IR channel offset13 mm
Probe Specifications
Temperature-40°C to 150°C
Accuracy(Assumes ambient operating temperature of 23°C ±2°)
Between –5°C and 65°C: ±0.5°C
Below –5°C: ±1°C
Above 65°C: ±1% of reading
Response time7-8 seconds (3 time constants)
Probe dimensionsDiameter: 3.0 mm
Length: 90 mm
Sensor typeThin-film platinum, class A, Resistance
Thermal device (RTD)
Operational Specifications
RepeatabilityWithin accuracy specifications of the unit
Ambient operating range0°C to 50°C
Relative humidity90% (±5%) RH non condensing @ 30°C
Storage temperature-20°C to 60°C
Weight150 g (with battery)
Dimensions165 x 32 x 50 mm
Power, battery life9 V alkaline
Battery lifeAlkaline: 10 hours minimum @ 23°C
Target illuminationHigh brightness LED
Display resolution4 digits, 0.1°C
Displayhold (7seconds)Yes
LCD backlit displayYes
Temperature display4 digits, 0.1°C resolution
Maximum temperature displayedYes
Environmental dataIP54 sealing (hand-washable, non-submersible)
Other Specifications (both)
Calibration certificateCalibration accuracy with NIST and DKD traceability
StandardsConforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible)
CertificationsCE NSF
Warranty2 years
Options/AccessoriesReplacement probe
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody.
Specifications subject to change without notice.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 163.79ms
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 24.23ms
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.
Chat with ourFluke assistant
Clear Chat