Kalibrator tekanan

The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure...

The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa....

The Fluke 700HTH-1 hydraulic test hose is a 10,000 psi, 690 bar working pressure test hose that...

The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration...

The Fluke 700ILF can be used to isolate the calibrator from the incidental contract with fluids.

The Fluke 700LTP-1 is a hand operated pressure pump designed to generate either vacuum to -13 psi /...

700P05Ex Gauge Pressure Module

700P06Ex Gauge Pressure Module

700P09Ex Gauge Pressure Module

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.

The Fluke-700PTP-1 pneumatic test pump is capable of supplying pressures up to 600 psi, 40 bar.

Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management...

Isothermal screw terminal for J wire, suitable for up to 20 gauge thermocouple wire.

Isothermal screw terminal for K wire, suitable for up to 20 gauge thermocouple wire.

Type-K thermocouple for general purpose applications, measurement range: -40 to 260 °C.

80PK-10 Pipe Clamp Temperature Probe

Designed for hands free measurement of HVAC temperature measuring applications, use multiple and...

80PK-22 SureGrip Immersion Temperature Probe

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated...

Type-K thermocouple suitable for food industry, liquids and gels, measurement range : -40 to 260...

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications,...

Type-K thermocouple for surfaces in rugged environment, durable ribbon sensor, measurement range:...

Type-K thermocouple for flat or curved surfaces such as plates and rollers, measurement range: 0 to...

7.5 V DC battery eliminator for operation of calibrator from 120 volt AC line. UL/CSA recognized.

80PK-9 General Purpose Probe

Operates with T-type thermometers, measurement range : -196 to 350 °C.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Single probe pierces 0.25 to 1.5 mm insulated wire.

BC7217 Battery Charger

BC7240 Battery charger/Eliminator for 75x

BP7235 NiMH Battery Pack

BP7240 Li-Ion battery pack for 75x

Hard carrying case with custom-cut foam liner

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

FlukeView Forms Software with cable

Heavy duty construction with mounting holes

Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads, VPS40...

HC200 Hook Clip set 2 red, 2 gray

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the...

Extend the current ranges of multimeters with a single range 200 A clamp-on AC Current Clamp with...

Small sized AC current clamp Fluke Current clamps are the ideal tools to extend the current ranges...

The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC...

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC...

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up...

Designed for use with multimeters, recorders, and safety testers for accurate non-intrusive AC...

Keep your multimeter test leads from tangling with Fluke’s LeadWrap test lead wraps. Three 8-inch...

STL120-III Shielded Test Leads Set

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with retractable, adjustable length test tips....

Test lead set dengan probe uji digunakan dalam beberapa aplikasi listrik. Fitur SureGrip™...

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded...

TL222 SureGripTM Silicone Insulated Test Leads

Includes 3 test lead accessories in an all-in-one set. Ideal starter kit for electrical...

These insulated test leads provide the convenience and variety for test lead configurations by...

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0...

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold...

The TL75 Hard Point™ Test Lead Set offers the convenience of a test lead and probe-in-one unit...

TL910 Electronic Test Probe Set

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.

Handy all-in-one kit that includes 3 Test Lead Sets.

TLK-220 EUR SureGrip Industrial Test Lead Kit

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224...

Ideal for electronics test and design, this master set includes 11 items in a handy pouch.

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in...

Provides firm and secure contact.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

Recommended for use with TL222 and TL224

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to...

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the...

Set of push-on adapters for TL71 and TL75 test probes.

WC100 Color Localization Set

Due sonde (una rossa, una nera).

The Fluke 80PK-8 Pipe Clamp Temperature Probe uses Type-K thermocouple for fast temperature and...

The Fluke 700PRV-1 consists of a relief valve settable from 725 to 5800 PSI (50 to 200 bar) to be...

Translucent accessory hoses allow the technician to easily identify if there is oil or other...

Extending and repairing J-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1...

The 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger...

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator...

Electricians know that when you are measuring electrical installations there often appears to be a...

700TC2 Thermocouple Plug Kit700TC2

Extending and repairing T-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1...

P5543 Angle Adapter

Metric and BSP Adapter Sets

This adapter mounts directly to the test port of the calibrator and allows for the calibration of...