Alat HVAC

The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure...

Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs, measurement range and...

Type-K thermocouple with standard shrouded banana jack, compatible with DMMs with temperature...

Isothermal screw terminal for J wire, suitable for up to 20 gauge thermocouple wire.

Isothermal screw terminal for K wire, suitable for up to 20 gauge thermocouple wire.

The 80K-15 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC...

The 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC...

The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC...

Type-K thermocouple for general purpose applications, measurement range: -40 to 260 °C.

Designed for hands free measurement of HVAC temperature measuring applications, use multiple and...

80PK-22 SureGrip Immersion Temperature Probe

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated...

Type-K thermocouple suitable for food industry, liquids and gels, measurement range : -40 to 260...

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications,...

Type-K thermocouple for surfaces in rugged environment, durable ribbon sensor, measurement range:...

80PK-9 General Purpose Probe

The 80PR 60 probe expands the utility of your RTD non-contact infrared thermometer by allowing you...

The 85RF High Frequency Probe is designed to convert a DC voltmeter with a input impedance of 10M...

Set of three safety designed insulated Probe Tip Alligator Clips.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Single probe pierces 0.25 to 1.5 mm insulated wire.

AS200-G Probe Accessory Set, Grey

AS200-R Probe Accessory Set, Red

Tough polyprophylene case.

The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store...

Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60...

C125 Meter Case

Zippered carrying case with durable vinyl exterior, has belt loop and an inner pocket to store test...

Zippered carrying case with durable vinyl exterior.

Case top opens laterally to allow use of test tool without removing it from the case and includes a...

Zippered carrying case with inside pocket belt loop and inside meter strap.

Oiled genuine top grain cowhide, rugged construction with heavy duty stitching and reinforced...

Tough polyprophylene case. Accessories and manual compartments. Detachable lid. One year warranty.

Tas pembawa beritsleting dengan saku di dalam dan lup sabuk.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

FlukeView Forms Software with cable

Fabric holster absorbs shocks and protects meter from rough handling, built-in pocket for lead...

Durable nylon construction protects your thermometer while keeping it within reach, cuff hook...

Now 80 Series owners can benefit from the Fluke Magnetic Hanging System. The easy-to-clean, snap-on...

Heavy duty construction with mounting holes

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC...

Small, rugged light easily attaches to any Fluke test probe, bright white LED illuminates contact...

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need.

Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited...

PM9094/101 Mini Testhook Set for PM8918 series probes

RS200 Probe-accessories Replacement Set

FlukeView software adds PC power to your Fluke ScopeMeter test tool

T5-RLS, Replacement Test Leads For Fluke T5-1000 or T5-600 Voltage, Continuity and Current Testers

TL1550B Test Leads with Alligator Clips (Red, Black, Green)

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with retractable, adjustable length test tips....

Test lead set dengan probe uji digunakan dalam beberapa aplikasi listrik. Fitur SureGrip™...

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded...

TL222 SureGripTM Silicone Insulated Test Leads

Includes 3 test lead accessories in an all-in-one set. Ideal starter kit for electrical...

These insulated test leads provide the convenience and variety for test lead configurations by...

Kit aksesori dirancang khusus untuk berfungsi di lingkungan energi tinggi.

5 cara menyambungkan

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

Large jaws, long leads and a piercing needle inside the jaws.

One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0...

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold...

The TL75 Hard Point™ Test Lead Set offers the convenience of a test lead and probe-in-one unit...

One pair (red, black) silicone test leads with right angle shrouded 4 mm (0.16 in) banana plugs.

TL910 Electronic Test Probe Set

3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.

Handy all-in-one kit that includes 3 Test Lead Sets.

TLK-220 EUR SureGrip Industrial Test Lead Kit

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224...

Ideal for electronics test and design, this master set includes 11 items in a handy pouch.

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in...

Set includes three Flexible Socket Probes and a Large Alligator Clip.

Provides firm and secure contact.

Test lead replacement set for the 430 Series Power Quality Analyzer.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

Slim probe with test button keeps your eyes on the panel while probing hard to reach points.

Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector...

Recommended for use with TL222 and TL224

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to...

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the...

Set of push-on adapters for TL71 and TL75 test probes.

Powerful magnetic hanging strap for multimeters. Use the universal hanger on hook, nail or wire to...

TPS VOLTPROBE 1 KV

TPS VOLTPROBE 10 V

TPS VOLTPROBE 100 V

TPS VOLTPROBE 400V

TPS VOLTPROBE 600 V

TPS VOLTPROBE 750 V

Coaxial Feed-through BNC Male to BNC Female Cable Terminator. Terdiri dari 2, 50Ohm, 1000V CAT III,...

Double insulated voltage probe for ScopeMeter 190 series.

Double insulated voltage probe for ScopeMeter 190 series. Each probe set includes:600 V CAT III /...

Double insulated voltage probe for ScopeMeter 190 series

Double insulated voltage probe for ScopeMeter 190 series.

Double insulated voltage probe for ScopeMeter 190 series.

VPS220-G - Voltage Probe Set, 100:1, one grey

Double insulated voltage probe for ScopeMeter 190 series.Each probe set includes: ...

WC100 Color Localization Set

Due sonde (una rossa, una nera).

700TC2 Thermocouple Plug Kit700TC2

Extending and repairing J-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1...

Extending and repairing K-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1...

Extending and repairing T-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1...

BP980 Double Banana Plug Kit

Draw flue gas samples up to 700ºF (370ºC) reliably for measurement with the Fluke CO-210 Carbon...

Special value kit for electrical professional who is looking to add on DC and AC current measurement...

Special value kit for electrical professional who is looking to add on DC and AC current measurement...

L210 probe light + probe extenders. Includes L200 probe light and TP280 test probe extenders

Special value combo pairs the new L200 Probe Light with one of the most popular test leads by Fluke...

Foldable soft pouch with six pockets and hook-and-loop.

Electricians know that when you are measuring electrical installations there often appears to be a...

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator...