Fluke Test leads, test probes and alligator clips

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224...

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold...

These insulated test leads provide the convenience and variety for test lead configurations by...

Alligator clip set with two slide-on alligator clips (red, black), insulated alligator clip jaws...

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in...

SureGrip™ accessories are designed to improve steadiness in slippery hands.

Slim probe with test button keeps your eyes on the panel while probing hard to reach points.

Ideal for electronics test and design, this master set includes 11 items in a handy pouch.

One pair (red, black) silicone test leads with right angle shrouded 4 mm (0.16 in) banana plugs.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

Very small 1 mm tips to access hard to reach test points

Economical accessories for making measurements in low energy, electronic applications.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0...

1.5 meters of added lead length to reach more test points.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

Set of push-on adapters for TL71 and TL75 test probes.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

Test lead replacement set for the 430 Series Power Quality Analyzer.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

When your job depends on every tool in your toolbox, Fluke test leads keep you working. Plated test...

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

Single probe pierces 0.25 to 1.5 mm insulated wire.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded...

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.

Set includes three Flexible Socket Probes and a Large Alligator Clip.

Recommended for use with TL222 and TL224

Handy all-in-one kit that includes 3 Test Lead Sets.

Large jaws, long leads and a piercing needle inside the jaws.

3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords

Provides firm and secure contact.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.

Set of three safety designed insulated Probe Tip Alligator Clips.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Replacement tips for TL910.

100 mm test lead for connecting measurement input to the Fluke 1730 Energy Logger.

2 m test lead for connecting measurement input to the Fluke 1730 Energy Logger.

0.1 m test lead for connecting measurement input to Fluke 17XX Power or Energy Loggers.

1.5 m test lead for connecting measurement input to Fluke 17XX Power or Energy Loggers.

Flat, three phase voltage connection cable for the Fluke 1730 Energy Logger.

RTD Probe for 721 and 719Pro

Probe accessory set for usage with VPS200 and PM8918 series scope probes.

Probe Accessory Set for usage with VPS200 & PM8918 Series Scope Probes.

Standard battery test probes for Fluke 500 Series Battery Analyzers.

Intelligent test probe set for Fluke BT520 Battery Analyzer (temperature measurement function not...

Interactive Battery Analyzer Test Probe with angled tip for use with Fluke 500 Series Battery...

In response to new ESA guidelines, Fluke introduces test probes with built-in fuses for additional...

Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads, VPS40...

Set of four Hook Clips (two red and two gray).

The Fluke 1730 Energy Logger 12 inch iFlex flexible current probes measure to 1500A AC while...

Designed for use with Fluke ScopeMeter 120-series.

Contains replacement parts for usage with the VPS200 & PM8918 Scope Probes.

Set of two (one red, one gray) double insulated silicone shielded test leads for noise free...

Stray voltage can appear in electrical installations, due to the capacity between wires.

Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector...

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to...

TRM50 Coaxial Feed-through BNC male to BNC female Cable Terminator.

Double insulated voltage probe for ScopeMeter190 series.

Double insulated voltage probe for ScopeMeter 190 series. Each probe set includes:600 V CAT III /...

Double insulated voltage probe for ScopeMeter 190 series

Double insulated voltage probe for ScopeMeter 190 series.

Double insulated voltage probe for ScopeMeter 190 series.

Double insulated voltage probe for ScopeMeter 190 series. Each probe set includes: …

Double insulated voltage probe for ScopeMeter 190 series.Each probe set includes: ...

The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure...