Fluke SW9010 Multiplexer card
Key features
- Anti-eddy current design: separate SENSE and SOURCE circuits, as well as connectors, reducing eddy current interference
- Support 4-wire test of 32 channels
- Each channel can be configured to measure ACR+DCV or enclosure potential contact check
- Self-recovery fuse for every channel to protect the system in the case of short-circuit
- Support scan mode, complete the ACR+DCV measurement of 256 channels in 30 seconds at the fastest speed.
- Life cycle: > 10 million times, with load
Product overview: Fluke SW9010 Multiplexer card
Fluke SW9010 Multiplexer Card is tailored for battery sorting. Its channel switching speed and immunity is much better than traditional solutions.
Specifications: Fluke SW9010 Multiplexer card
Wiring | 4-wire connection |
Number of channels | 32 channels, each channel can be configured to measure resistance + voltage, or enclosure voltage |
On/Off time | 3 ms, typical |
Channel switching | Open before close |
Maximum allowed voltage | DC ± 10 V |
Maximum allowed current | 750 mA |
Relay life cycle | > 10 million times, with load |
Short protection fuse (Self-recovery) | Rated current per channel: 750 mA Fusing current: 1.5 A |
Measurement connector | D-sub 68-pin, female, compatible with buckle or screw UNC #2-56 |