검색 결과

검색조건 :
Found 134 results containing the words:product
  • Fluke ii910 정밀 음향카메라

    컨베이어의 잠재적인 기계적 문제 및 전기 그리드의 부분 방전을 찾습니다.

    제품
  • Fluke 190 Series III ScopeMeter® 테스트 도구

    ScopeMeter 테스트 도구는 견고한 휴대성과 벤치형 오실로스코프의 고성능을 결합했습니다.

    제품
  • Fluke C37XT 보호용 EVA 하드 공구 케이스

    대부분의 멀티미터를 안전하게 운반할 수 있는 견고한 EVA 폼 케이스

    제품
  • PVA-1500HE2 I-V Curve Tracer Thermography Kit

    Optimize Solar Performance: PVA-1500HE2 PV Analyzer & TiS75+ Thermal Camera

    제품
  • HART DRYWELL CABLE | An interface cable kit that includes a null modem to connect the Fluke 754 with Fluke Calibration dry-wells and Micro-Baths to automate

    The Fluke 700SC is used to communicate with the Fluke 726, the Fluke 754, and the Fluke Calibration 3130. It allows you to connect these products to a PC. It also can connect a Fluke Calibration dry-well with a 754.

    제품
  • Preventive maintenance vs predictive maintenance vs proactive maintenance

    What is the difference between preventive maintenance vs predictive maintenance programs? Learn how to move from a reactive to a proactive maintenance program.

    문서
  • What is the difference between single-phase and three-phase power?

    Learn the difference between single-phase and 3-phase power supplies, including uses and configurations.

    문서
  • Comparing the Fluke 438-II and Fluke MDA-500

    Extend motor drive production performance, trend data over time and troubleshoot excess energy consumption. Compare the 438-II Power Quality and Motor Analyzer and the Fluke MDA-550 Motor Drive Analyzer.

    문서
  • Want to be more proactive? Add route-based vibration to your technician’s toolkit

    .super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; } .super-custom body { margin: 0; } .super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup, .super-custom main, .super-custom menu, .super-custom nav, .super-custom section, .super-custom summary { display: block; } .super-custom audio, .super-custom canvas, .super-custom...

    문서
  • Fluke 910 and 910R GPS Week Number Rollover Event

    MEMORANDUM FOR U.S. OWNERS AND OPERATORS USING GPS TO OBTAIN UTC TIME (211.91 KB)A recent notice from Homeland Security announces a GPS Week Number Rollover Event scheduled for April 6th, 2019. This event will affect the 910 and 910R products that were purchased before 2007.Dept. of Homeland Security Notice     What will happen?On this date, at the rollover time, some units will lose date information and display a 1999 date for reporting purposes. Frequency deviation data may not be archived within...

    문서
  • Release: MET/CONNECT version 2.2.0 (with MET/CAL version 11.1.0)

    MET/CONNECT v 2.2.0 with MET/CAL v 11.1.0 (2.1 GB)   Document(s): MET/CONNECT 2.2.0 ReadMe (154.98 KB) MET/CAL 11.1.0 ReadMe (450.51 KB) MET/CONNECT Installation Guide (722.31 KB) MET/CONNECT API Reference (825.91 KB) Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.2.0 and MET/CAL version 11.1.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can...

    문서
  • Pressure Calibration and Repair Services

    Fluke Calibration offers pressure calibration and repair services in the United States through our accredited calibration laboratories in Phoenix, Arizona and Everett, Washington. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about...

    문서
  • 교정 소프트웨어

    Fluke Calibration has software solutions for virtually every measurement discipline. Designed by measurement experts, these programs increase your productivity while strengthening your quality program and leaving a smile on your auditor's face.

    문서
  • 5 ways test tools can improve safety around rotating machinery

    The electrical hazards associated with electro-mechanical equipment are severe and the electrical safety PPE requirements are extensive. But what about safety concerns from the mechanical side of rotating machinery?

    문서
  • The 7 Best Tools for Electricians in 2024

    We recently asked electricians what they considered their top 5 essential tools—there were a few ties, so we’re sharing their top 7.

    문서
  • 절연 테스터 vs 메그옴미터

    절연 테스터와 메가옴미터의 차이점은 무엇일까요? 절연 미터, 테스터, 메가옴미터 및 메거를 비교하여 귀하의 요구 사항에 가장 적합한 것이 무엇인지 알아보십시오.

    문서
  • Understanding Voltage Tester Pens

    Voltage tester pens offer a quick and non-invasive method to detect live circuits. Understanding their operation, proper usage, and how they compare to tools like multimeters can help you choose the right instrument for your electrical tasks.

    문서
  • Best Non-Contact Voltage Tester

    A guide to choosing the best electrical and voltage tester from Fluke for your needs. Built for electricians, maintenance managers, facility technicians and homeowners, learn about which voltage detectors in the Fluke VoltAlert line are right for you.

    문서
  • Maximizing Your Industrial Ethernet Cabling UpTime

    /* ************************************************************ */ /* After pasting this file into the textbox, put your content inside a block */ /* ************************************************************ */ .super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; font-size: 10px; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); } .super-custom body { margin: 0; font-family: "Helvetica Neue", Helvetica, Arial, sans-serif; font-size: 14px; line-height:...

    문서
  • How to adjust the level and span on your thermal camera

    Watch a video tutorial on adjusting level and span using your Fluke Ti400, Ti300 or Ti200 thermal imager to accurately locate specific trouble spots.

    문서
  • 태양광 PV 안전 위험 3가지 및 이를 방지하는 방법

    PV 시스템을 유지보수할 때 발생 가능한 3가지 주요 위험을 피하고, 더 안전하게 작업할 수 있는 방법을 알아보십시오. 안전한 작업 환경을 조성하는 방법과 취해야 할 제어 조치를 파악해야 합니다.

    문서
  • Ruska pressure calibration

    Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

    문서
  • Hart Scientific Temperature Calibration

    Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

    문서
  • Pressurements deadweight testers and comparison test pumps calibration

    Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

    문서
  • DH Instruments (DHI) Pressure and Flow Calibration

    DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

    문서
  • DH Instruments (DHI), Ruska Instruments, Pressurements and the Fluke Calibration brand

    Ruska Instruments, founded in 1944 in Houston, Texas, grew from a small manufacturer of PVT (pressure, volume, temperature) instrumentation to a leading global manufacturer of precision laboratory pressure instrumentation.  Its deep tradition of pressure metrology makes it a household name in National Metrology Institutes and in other worldwide organizations with demanding pressure calibration needs.  The Ruska brand features primary pressure standards, transfer standards, air data test sets, accessories,...

    문서
  • Fluke 27GHz RF Calibrator – Concept Test

    Product description:The product is the Fluke 27GHz ‘single-box’ RF calibrator, with Fluke MET/CAL calibration automation software. It provides a unique level of integration through a combination of performance, functionality, signal delivery and measurement capability:Precision signal level and attenuation, high signal purity and low distortion modulationLow phase noise and jitterIntegral power meter readout (thermistor type power sensors)Integral 50MHz frequency counterCalibration oriented user...

    문서
  • What is else is needed to complete the pressure calibration solution?

    Do you have the required pressure generation and control hardware?See Are pressure generation and control required? and specific product specifications to determine what is needed. Most needed hardware can be found in the Pressure calibration accessories section.Do you have all necessary hardware to connect components together and to the device under test?After you have all the main components of your system identified, you will need to make sure you are able to connect it all together. Connect...

    문서
  • Temperature Calibration and Repair Services

    IntroductionFluke Calibration provides calibration and repair services for the former Hart Scientific line of temperature calibration equipment. Calibration and repair services for baths and industrial calibrators are provided in Everett, Washington, while digital thermometer readouts, 4180 and 4181 infrared calibrators, temperature probes (SPRTs, PRTs, thermistors, reference thermocouples) and other reference standards are calibrated and serviced in American Fork, Utah.Complete an online request...

    문서
  • Electrical and RF Calibration and Repair Services

    Fluke Calibration offers instrument repair and calibration services for electrical and RF calibration equipment through our accredited calibration laboratories in Everett, Washington (see our Authorized Service Centers page for service outside of the US). Our prices are competitive and our turnaround times are excellent.Equipment types include:Frequency countersMulti-product and multifunction calibratorsVoltage, current and resistance calibratorsProcess calibratorsStandard resistorsZener reference...

    문서
  • Flow Calibration and Repair Services

    Fluke Calibration offers flow calibration and repair services in the US through our accredited calibration laboratory in Phoenix, Arizona. Our prices and turnaround times are competitive, and our quality and capabilities are unmatched.Complete an online request for service form.Service Request (RMA)Need help submitting an online Service Request (RMA)? Watch this brief Quick Start Video. We've also prepared a Getting Started Guide.For more information about these services or to request a quote call...

    문서
  • 9 Things You’ll Love About the Fluke T6-1000 PRO Electrical Tester

    Why choose the Fluke T6 Electrical tester? Read 9 things to love about the first electrical tester that performs AC current, AC voltage and frequency up to 1000 V AC without test leads.

    문서
  • Case study: See how the 438-II Motor Analyzer is building an underwater fan club

    Watch the video to see how the Point Defiance Zoo and Aquarium uses the Fluke 438-ii power quality analyzer and motor analyzer to reduce water and energy use.

    문서
  • 열화상을 이용한 모터 및 드라이브 문제 해결

    적외선 열화상 카메라는 발전, 제조 및 상용 플랜트에서 모터의 고장을 추적하고 예방 정비를 위해 모터 상태를 모니터링하는 데에 유용합니다.

    문서
  • Fluke 도구 + 풍력 발전 및 태양광 에너지의 미래

    비디오를 통해 Fluke 도구가 태양광 에너지, 풍력 발전 및 재생 에너지의 미래를 어떻게 지원하고 있는지 알아보십시오.

    문서
  • True RMS tools for energy efficient HVAC systems

    HVAC technology true-RMS meters are essential test tools for accurately measuring and troubleshooting complex HVAC control systems.

    문서
  • 고품질 열화상 촬영을 위한 5가지 팁

    열화상의 품질은 단순한 미적인 것 그 이상입니다. 특정 우려 부분을 정확히 찾아내는 것이 중요합니다. 이를 살펴보는 간단한 방법은 다음과 같습니다. 이미지 품질 = 초점 + 광학장치(optics) + 공간 해상도(픽셀 + 시야)

    문서
  • 열화상 카메라로 모터를 검사하는 방법

    설계 부하의 40% 이상으로 운전하는 정상 작동 조건에서 모터의 열 신호를 확인하면, 모터 상태에 대한 많은 정보를 알 수 있습니다.

    문서
  • Keep those motors running: electric motor maintenance preventing downtime

    Automotive customers have zero tolerance for bad parts and therefore, electric motor maintenance needs utmost care. One of our customers, CNP Myszkow, coats small parts for the automotive industry. After dip spin painting, they heat-treat the parts in a tunnel furnace. This is divided into several areas, each with different temperatures. An electric motor drives a fan in each area to ensure stable temperatures since temperature stability relates strongly to final product quality. Any changes from...

    문서
  • 압력 교정을 설정하는 데 가장 적합한 액세서리

    이 동영상에서는 압력 교정을 수행하는 모범 사례와 피팅 및 호스 등 어떤 액세서리를 이용하면 작업을 더 원활하게 할 수 있는지 알아보겠습니다.

    문서
  • How to find the root cause of intermittent production stops

    How to find the root cause of production line stoppage and reduce downtime in manufacturing.

    문서
  • How to collect data with the Fluke 1748 Power Quality Logger?

    With all Power Meters, Power Quality Analyzers, Energy Loggers or Power Loggers you can measure quite a number of Power parameters. In fact, the number of variables these instruments can measure, log and store is in many cases overwhelming. Imagine yourself setting up, downloading and analyzing a 32GB file with a logging of 500+ parameters over a month period…..So, wishing for “I want to log everything” is in most cases not the best idea, and certainly not the most efficient way. This leaves...

    문서
  • Voltage fluctuations, flicker and power quality

    Flickering lights can have an adverse effect on health, causing fatigue, lack of concentration, migraines and in some cases, epileptic shock. The severity of reaction and sensitivity varies from person to person. Some people can see a higher rate of flickering light than others. Fluorescent lamps can occasionally develop a fault that can cause them to have noticeable flicker.While health effects are a main concern, the production line of an industrial plant can also be affected. Workers can feel...

    문서
  • Get peak variable speed drive efficiency through power quality analyzer

    Variable-speed motors and drives are normally much more efficient than fixed-speed types, but even they don’t always work at peak efficiency. An analysis of VSDs at one drinking water pumping station helped save over 20% of energy costs – repaying many thousands of Euros every year.Load measurement at input and output of a VSD The main energy cost for water companies comes from pumping water up from the well and through the network. Variable-speed drives match output to demand and so help minimize...

    문서
  • 아크 섬광 경계 이해하기

    아크 섬광 경계는 아크 섬광이 발생할 가능성이 있는 전원이 공급된 노출된 도체 또는 회로 부품으로부터의 최소 "안전" 거리입니다. 작업자가 전기가 흐르는 노출된 장비에 더 가까이 다가갈수록 더 높은 수준의 아크 등급 의류 및 개인 보호 장비가 필요합니다.

    문서
  • 현장 압력 테스트용 핸드 펌프 및 압력 테스트 게이지

    현재 사용 중인 테스트 어플리케이션에 맞는 적절한 펌프와 압력 게이지를 선택하는 것이 중요합니다. 테스트하는 교정 기기가 테스트 대상물 보다 4~10배 더 정확한 것이 좋습니다.

    문서
  • Retro-commissioning: The missing link for improving commercial facility performance

    Improving energy efficiency and building performance through retro-commissioning entails commissioning older buildings that need fine tuning or were not properly commissioned initially.

    문서
  • 열화상 사용하여 쉽게 탱크 수위 측정 및 검사

    탱크 수위 측정 및 검사에 열화상 카메라를 사용하는 방법을 알아보십시오. 최고의 열 판독값을 얻기 위한 실용적인 팁을 참조하십시오.

    문서
  • Remote power monitoring for maintenance managers

    Keeping all the components of a facility running safely and efficiently is no easy task. And nobody knows that better than maintenance managers. Tracking the operational health of all those components is key to preventing unexpected failures and costly downtime. The trouble is, routine maintenance checks often miss recurring problems. If maintenance technicians aren’t taking readings at the right moment, an intermittent fault can go undetected until it escalates into a full-fledged failure.The...

    문서
  • 압력 스위치 테스트 문서화

    압력 스위치는 압력을 공급하고 측정하기 위해 펌프에 장착된 압력 게이지와, 스위치의 개폐 여부를 확인하기 위해 연속성을 테스트할 수 있게 설정된 디지털 멀티미터로 테스트합니다.

    문서
  • How to use a phasor diagram?

    When you perform an energy or power quality survey you need to measure days or weeks of data, imagine the disappointment if when you return to the logger after that time you discover that you have failed to capture the correct measurements. The support teams at Fluke all too often get calls from users who don’t understand the measurements they have logged, usually they think the instrument is at fault. Usually though the problem is due to the user making a connection error, this can be due to incorrect...

    문서
  • 압력 비교기를 이용한 벤치에서의 교정

    압력 비교기는 벤치 압력 교정을 위한 편리한 기기입니다. 벤치 교정은 기준 조건을 유지하고 가능한 불확실성을 최대한 낮추기 위해 실시합니다. 또한 벤치는 테스트 대상 기기를 검사, 조정 및 수리하기에 편리한 장소입니다.

    문서
  • HART 스마트 압력 트랜스미터 교정

    성능을 확인 및 문서화하고 HART 통신기 지원 압력 트랜스미터를 조정하려면 많은 도구가 필요할 수 있습니다. HART 통신이 포함된 Fluke 754 문서화 공정 교정기와 같은 HART 지원 교정기로 이 작업을 수행하면 작업이 간소화되고 가져와야 할 다른 물품이 줄어듭니다.

    문서
  • Find problems early by monitoring motor and drive efficiency

    More than 40% of industrial motors work at or below 40% of their load rating. That means poor power factor and inefficient operation. Efficiency of all motors can drop over their lifetime, which increases energy and maintenance costs and can even increase plant downtime. Monitoring drive efficiency catches the symptoms early.The four key power quality measures are:active (real, useful) power in KW,apparent power (complex, that you actually pay for) in kVA,reactive (imaginary, wasted) power in kvar,...

    문서
  • 압력 스위치 테스트 수행 방법

    압력 스위치의 정확한 교정은 공정 품질과 장비의 안전한 작동을 보장하는 매우 중요한 프로세스입니다. 설정은 디지털 멀티미터 또는 교정기로 일련의 스위치 접점 전체에 걸쳐 전압 또는 도통(연속성)을 판독해야 한다는 점을 제외하고 압력 게이지 교정과 비슷합니다. 교정의 목적은 압력 스위치의 설정 포인트 및 데드밴드(dead band)에서 오류를 감지하고 수정하는 것입니다. 교정기는...

    문서
  • 데드웨이트 테스터를 이용한 벤치에서의 교정

    데드웨이트(분동식) 테스터는 벤치 응용 분야에서 정확도와 신뢰성이 가장 중요한 요구사항일 때 일반적으로 사용되는 검증된 압력 교정 방법입니다. 교정 작업은 편의를 위해 그리고 기준 조건을 유지하기 위해 벤치에서 수행합니다.

    문서
  • 현장에서 온도 센서를 교정하는 방법

    Fluke 드라이 웰을 휴대용 문서화 교정기와 페어링하면 완전한 현장 온도 교정 솔루션을 갖출 수 있습니다.

    문서
  • PV 시스템에서 무부하 차단 정격 분리를 안전하게 여는 방법

    전류를 차단하지 않도록 설계된 태양열 PV 무부하 차단 요구 사항에 대해 알아보십시오.

    문서
  • 2638A Firmware

    2638A Firmware (.zip)TITLEUSE WITH2638A 1.06.01 Firmware2638ATITLE2638A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Changed default Auto Record from OFF to ON, instrument will by default record data.Default measurement rate...

    문서
  • MFC-CB v1.00b Embedded Software

    MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    문서
  • molbox1 v5.41 Embedded Software

    molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    문서
  • molbox RFM™ v1.20d Embedded Software

    molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

    문서
  • National Instruments LabView® driver for Fluke data acquisition instruments

    National Instruments LabView® driver for Fluke data acquisition instruments (.zip)This driver is compatible with these Fluke data acquisition products:2680 Series Data Acquisition Systems2640A NetDAQ Data Acquisition Unit2645A NetDAQ Data Acquisition Unit

    문서
  • 6270A Embedded Software, Update by USB

    6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

    문서
  • 6105A/6100B Electrical Power Standards Firmware Upgrade

    6105A/6100B Electrical Power Standards Firmware Upgrade (.zip)Documents:6105A/6100B firmware Change History and Installation Instructions (.doc)6105A/6100B Electrical Power Standards Firmware UpgradeThis firmware upgrade is suitable for all 6105A and 6100B units that have 2.xx or 4.xx firmware fitted.Note this firmware upgrade is NOT suitable for the 6105A/610B that currently has 1.xx or 3.xx firmware loaded. This upgrade can only be done at a service center.Note this firmware upgrade is NOT suitable...

    문서
  • CalTool for Analog Free Utility

    CalTool for Analog Free Utility (.exe)TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.00TITLEVERUSE WITHDOCUMENTSCalTool™ for Analog Free Utility1.002003.01.27molbox1 (w/MFC option installed) & MFC-CBHelp File IncludedInstructions:Download and run the file. The installation program will prompt you through the process.DescriptionCalTool™ for Analog is used to calibrate the analog circuits of molbox1 and MFC-CB. CalTool for Analog is PC based application that assists in the calibration...

    문서
  • 96270A/96040 Firmware Update

    96270A/96040 Firmware Update (.exe)Documents:96xxx Firmware Release Notes (.doc)96xxx Firmware Upgrade Instructions (.pdf)96270A/96040A RF Reference Source Firmware UpgradeDownload instructions and a list of firmware revision history, new features and resolved issues for the upgrade versions are documented at the link above. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have...

    문서
  • 9640A Firmware Upgrade

    9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

    문서
  • Fluke DPC/Track2 60-Day Trial

    Fluke DPC/Track2 60-Day Trial (.exe)Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke handheld’s documenting features.Using a labor-intensive, manual pen-and-paper system steals valuable resources and wastes time. And there’s also a high probability for measurement errors.With DPCTrack2, calibration time drops by 50% or more. Work assignments and calibration results...

    문서
  • COMPASS® for Pressure Version 4 Release Notes

    Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

    문서
  • 8270A/8370A Embedded Software

    8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

    문서
  • CalTool for RPTs Free Utility

    CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

    문서
  • molbox1+ or molbox1+S v6.01 Embedded Software

    molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

    문서
  • 6270A Embedded Software, Update by Serial RS-232 Port

    6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

    문서
  • Thank you for registering your product

    Thanks for submitting your form!

    문서
  • Fluke Connect™ 소프트웨어를 Fluke 377 FC 및 Fluke 378 FC FieldSense™ 클램프 미터와 함께 사용하는 방법

    377 FC 및 378 FC 클램프 미터에 Fluke Connect 소프트웨어를 사용하면 결과를 기록, 분석 및 다른 사람과 공유할 수 있습니다. 예방적 유지보수를 위한 동향 데이터.

    문서
  • Proper calibration of industrial temperature process systems

    Temperature measurement is a critical parameter in many industrial processes. As a result, these processes generally use installed thermometers or temperature transducers. Proper calibration of these installed systems has always presented a challenge. Traditionally, simulators are used to provide in-situ calibration of the electronic portions of these systems. Although this is a valid technique for the calibration of the electronics, considerable inaccuracies are introduced by the sensor itself.The...

    문서
  • 1586A Firmware

    1586A Firmware (.zip)TITLEUSE WITH1586A 1.06.01 Firmware1586ATITLE1586A FirmwareFirmware update V 1.06.01 (2021 June) made the following changes:Changed connection timeout from 100 mSec to 1 Sec to correct connection timeout errors on low latency connections.Changed default scan count from 1 (single shot) to 0 (Infinite), by default instrument will now scan continuously until user stops it.Corrects an issue with user defined Alarm and Timestamp configuration getting lost.Note: Users of 2680A-APSW...

    문서
  • Fluke 1773, 1775 and 1777 Power Quality Analyzers Software and Firmware

    .sub-title { padding-top: 10px; } .warning { padding: 0 30px; } .hr-warning { margin: 25px 0px 30px 0px; font-size: 1px; line-height: 1px; border-top: 0px solid #ffffff; border-right: 0px solid #ffffff; border-bottom: 1px solid #000000; border-bottom-color: #000000!important; border-left: 0px solid #ffffff; } Fluke Energy Analyze PlusFluke Energy Analyze Plus application software for download, analysis and reporting. Used with Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, 1748, 1773, 1775 and...

    문서
  • How to reach manufacturing excellence with OEE benchmarks

    Highly successful manufacturing plants rank high in availability, performance, and quality. A plant’s most substantial capital investments are in their facilities and equipment, and most manufacturing systems are built to meet a specific capacity level that meets demand. This is why capacity maintenance is critical to the success, and competitiveness, of manufacturing plants today.The more efficiently a company can produce a product, the more products it can produce at a lower cost which results...

    문서
  • Performing high-pressure calibration

    Learn about viscosity, compressibility, head pressure, safety, fluid compatibility, pressure stability, fitting & tube selection, & reference standards.

    문서
  • How to choose a blackbody or Infrared temperature calibrator

    Though the principle of radiation thermometry has been used in industry for decades, its recent growth in the HVAC, factory maintenance, aerospace, and energy industries is causing many people to inquire about infrared (IR) thermometers and the calibration equipment needed to support them

    문서
  • Automating temperature sensor calibration with the Fluke Calibration 1586A Super-DAQ

    Use the 1586A Super-DAQ to automate temperature sensor calibration The 1586A Super-DAQ Precision Temperature Scanner provides a unique feature for automating sensor calibration that can greatly increase your lab productivity—without a PC and software. When the Super-DAQ is connected to a Fluke Calibration dry-well or fluid bath, it can control the temperature source to run the calibration automatically. You simply program the number of set-point temperatures and their values, select a scan sequence,...

    문서
  • Infrared Temperature Calibration 101

    Learn the basics of infrared temperature calibration including how infrared thermometers work, emissivity, blackbodies, detecting radiance & more.

    문서
  • Understanding and Dealing with High Frequency Error Sources in Oscilloscope Calibration

    Metrologists & calibration technicians deal with a variety of high frequency considerations such matching errors. Understanding how sources of errors in oscilloscope calibration influence the results & how to address them can simplify scope calibration, reduce errors & ease the burden of uncertainty analysis

    문서
  • How End-of-Life Calibrators Can Help You Upgrade to the Newest Technology and Reduce Production Risks

    Owning an end-of-life calibrator presents risks to your business or workflow & can prevent you from leveraging the latest technology. Learn more here.

    문서
  • Now You Can Use MET/CAL™ Software by Itself or With the Asset Management Software of Your Choice

    Learn how MET/CONNECT Calibration Integration Software allows you to use MET/CAL Software without an asset management application or with the one of your choice.

    문서
  • 1586A Super-DAQ Precision Temperature Scanner Resource Center

    Save time and money by using a 1586A Super-DAQ and a Fluke Calibration dry-well, fluid bath, or furnace to automate the calibration of up to 40 temperature sensors—simultaneously, without requiring a PC or software.

    문서
  • Guide to determining pressure measurement uncertainty for PM200, PM500 and PM600 Pressure Measurement Modules

    Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

    문서
  • Tempmeko 2019 Temperature Metrology Conference – Fluke Calibration’s Overview of the Conference

    Temperature metrology experts from Fluke Calibration attended Tempmeko 2019 and provide an overview of the top 5 topics covered there, including some photos.

    문서
  • ISO/IEC 17025:2017 Training Online

    Fluke Calibration offers free, online ISO 17025 training to address the 2017 changes in the form of this article and training webinars. Get the info here.

    문서
  • Accounting for Gravity When Using a Deadweight Tester or Piston Gauge

    Learn the 3 methods of deadweight tester and piston gauge gravity correction in this brief app note.

    문서
  • Automate temperature sensor calibration with a 1586A Super-DAQ Precision Temperature Scanner

    Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

    문서
  • A calibration bath review

    Choosing a bath should not be that difficult but there are a lot of choices. For some, it’s unfamiliar territory and in that case, I thought you might like to have a map.

    문서
  • The Truth About Height Based Pressure Units

    When does height equal pressure? Well the simple answer is it doesn't, but more on that later. A less simple answer is that height based pressure unit standards for manometers have evolved significantly over time. This has left an interesting legacy that you need to be aware of if you calibrate pressure instruments using height based units.

    문서
  • How to Select an Electrical Calibrator

    Successful selection of a calibrator involves a thorough analysis of the specifications of both the equipment to be tested and the calibrating standards.

    문서
  • Unit of Measure Converter Free Utility

    Unit of Measure Converter Free Utility (.exe)TITLEVERUSE WITH Unit of Measure Converter Free Utility2.01a2006.08.15All Products Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe Unit of Measure Converter is a free ActiveX control distributed by Fluke Calibration. This program can be run stand alone or built into other applications. Use the [Show Help] menu choice for details on using this tool.Warning - Fluke Calibration has made...

    문서
  • RPM4-AD v1.00f Embedded Software

    RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

    문서
  • 교정이 왜 중요한가요?

    일상 생활에서, 산업 및 분야별 관점, 장점, 목적 및 발생할 수 있는 위험과 함께 교정이 중요한 이유에 대해 알아봅니다.

    문서
채팅Fluke 도우미
채팅 지우기