English

Fluke 2AC Non-Contact Voltage Tester

Fluke 2AC Non-Contact Voltage Tester is rated 3.8 out of 5 by 46.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 22.55ms
  • REVIEWS, PRODUCT
  • Fluke 2AC VoltAlert™ Electrical Tester
  • Fluke 2AC VoltAlert™ Electrical Tester
  • Fluke 2AC VoltAlert™ Electrical Tester
  • Fluke 2AC VoltAlert™ Electrical Tester

Key features

  • Non-contact voltage detection from 90 to 1000 V AC
  • Innovative 'Battery Check' ensures battery is in good condition*
  • Integrated clip design, optimized for pocket storage

Product overview: Fluke 2AC Non-Contact Voltage Tester

Always on for faster, safer voltage testing

The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. *

Your first-choice tool for go/no-go testing

The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.

  • CAT IV 1000 V overvoltage rated product for best in class user protection
  • Suitable for a wide range of residential, commercial and industrial needs
  • Fluke ruggedness and reliability with a two-year warranty

* Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.

Specifications: Fluke 2AC Non-Contact Voltage Tester

Specifications
Operating PrinciplesSenses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.
Safety ComplianceMeets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2
EMC ComplianceMeets IEC 61326-1:2006
Operating90 V AC to 1000 V AC, CAT IV 1000 V rated
Temperature (Operating and Storage)-10°C to 50°C (-14°F to 122°F)
Operating Humidity Ranges0% to 95% (0°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40°C to 55°C)
Altitude2000 m (CAT IV 1000 V)
CleaningClean with damp cloth
Battery LifeTypical battery life of greater than one year
Warranty PeriodTwo years

Models: Fluke 2AC Non-Contact Voltage Tester

FLK2AC/90-1000V
Fluke 2AC VoltAlertTMElectrical Tester
90-1000V, straight tip for North American style outlets
Buy it
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 70.18ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Rated 5 out of 5 by from Solid tester. Always on and ready to fast test. Rhis tester is simply the best for me. I work in noisy generation environment and without this is not possible to identify power presence. Its suitable for industrial use as all you need is speed and the light the buzzer won't be much use for me! as machines are too loud you ate at home then you may need a volt stick that sounds. I tried kewtech but it failed so a reliable fluke is what you need at busy times! It could be a little longer (taller) becouse the voltages are too high at times but you can use it with an extension pole so easy of use then nakes to 4 stars not 5 !
Date published: 2023-10-25
Rated 5 out of 5 by from Very good I personally prefer the no beep and the beep is useless where I work anyways. Just make sure you test your tester before testing a wire to ensure it is functional. The only false positive I've gotten was from induced voltage, and no false negatives unlike the Milwaukee one I've used. Beep is subjective and I like not having it!
Date published: 2023-10-21
Rated 1 out of 5 by from DANGEROUS No Audible alert! Twice I've almost been electrocuted because I couldn't see the light at the tip, in the sun. I don't understand why there is no audible setting? Very dangerous for an electrician or do-it-yourselfer!
Date published: 2023-06-17
Rated 3 out of 5 by from test button Unit works well but not the test button. Came out on it s own not sure how. I fountd it the first time and put it back in. Gone on the second time.
Date published: 2023-02-21
Rated 1 out of 5 by from Brand New Inoperarative I purchased the Fluke 1AC II Non-contact 1000 Amp 1000-Volt LED Voltage Tester It was on special and I paid $36 plus the tax. I took it out of the package tested it and it work great. I store it in my tool box. Close to a year my lights when out at home and I wentt to go use it. It did not work ! I purchase new AAA betteries and when I put them in a red light comes on with a loud screaming beep and it will not turn off !!! I paid cash for it . A waste of money and truly disappointed!!!
Date published: 2023-01-21
Rated 5 out of 5 by from Excellent NCV Tester Excellent tool, precise readings even with multiple circuits on same box!.
Date published: 2022-12-23
Rated 4 out of 5 by from Constantly blinks Just got this tester and it constantly blinks every time I touch it.. i could see it blinking in the bag when it arrived. Anyway to fix this is
Date published: 2022-11-21
Rated 5 out of 5 by from Great product Great product, use it everyday at my job. Wouldn’t do an install without it!
Date published: 2022-06-19
  • y_2023, m_11, d_30, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasreviews, tv_11, tr_35
  • loc_en_US, sid_3739292827700, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.73ms
  • REVIEWS, PRODUCT
Please enable cookies to view product reviews.